2 × 2 Lens array antenna using square-bottom concave-convex lens in 300-GHz band.

A 2×2 lens array provides a half reduction of antenna height compared to the twice-diameter single-feed lens antenna with an almost similar gain performance due to the same aperture size. However, it generally suffers from a non-uniform amplitude distribution of each lens, which degrades the overall...

Full description

Bibliographic Details
Main Authors: Baharom, Bazilah, Sugimoto, Yoshiki, Bakar, Rohani, Kunio, Sakakibara, Nobuyoshi, Kikuma, Abd. Rahman, Nurul Huda
Format: Article
Language:English
Published: Institute of Electrical and Electronics Engineers Inc. 2023
Subjects:
Online Access:http://eprints.utm.my/104944/1/NurulHudaAbdRahman2023_22LensArrayAntennaUsingSquareBottom.pdf
Description
Summary:A 2×2 lens array provides a half reduction of antenna height compared to the twice-diameter single-feed lens antenna with an almost similar gain performance due to the same aperture size. However, it generally suffers from a non-uniform amplitude distribution of each lens, which degrades the overall lens antenna performance. This study proposes a 2×2 lens array antenna composed of square-bottom lenses with a concave-convex lens shaping design to improve the uniformity and aperture efficiency. The measured results of the proposed 2×2 square-bottom concave-convex lens array antenna with a lens height of 9.74 mm achieved a boresight gain of 34.9 dBi, and the lowest sidelobe level observed was greater than −12 dB in the 300-GHz band.