Effect of application time of water-based curing compound on strength, hardness, sorptivity and porosity of blending concretes

Effect of application time of water-based curing compound on strength, hardness, sorptivity and porosity of blending concretes

This paper describes the effectiveness of water-based curing compound (WBCC) applied to concrete surface at different elapsed time from casting on the various properties of OPC, silica fume (SF) and fly ash (FA) concrete. It also signifies the importance of utilizing moist curing prior to applying W...

Descripció completa

Dades bibliogràfiques
Autor principal:	Abdelaziz, G. E.
Format:	Conference or Workshop Item
Idioma:	English
Publicat:	2006
Matèries:	TA Engineering (General). Civil engineering (General)
Accés en línia:	http://eprints.utm.my/255/1/GEABDELAZIZ2006_Effectofapplicationtimeof.pdf

Ítems similars

Water absorption and sorptivity of normal strength oil palm shell concrete
per: Fadhilah Hanim, Redzuan
Publicat: (2018)

The effect of curing time on compressive strength of composite cement concrete
per: Uddin, Md, et al.
Publicat: (2012)

The Effect of Different Curing Methods on the Compressive Strength of Eggshell Concrete
per: Tan, Yeong Yu, et al.
Publicat: (2017)

Effect of fly ash as partial cement replacement on workability and strength on water cured lightweight concrete
per: Nur Fazliana, Muhamad Razali
Publicat: (2018)

Effect of Curing Regime on Compressive Strength of Concrete Containing Malaysian Laterite Aggregate
per: Norul Wahida, Kamaruzaman, et al.
Publicat: (2012)

Strength and porosity of porous concrete pavement containing nano black rice husk ash
per: Putra Jaya, Ramadhansyah, et al.
Publicat: (2019)

Lightweight concrete made from crushed oil palm shell: tensile strength and effect of initial curing on compressive strength
per: Shafigh, P., et al.
Publicat: (2012)

Compressive strength of lightweight foamed concrete bricks with different size of hollow under different curing regime
per: Nur Afirah, Kamalrulzaman
Publicat: (2014)

Effect of curing conditions on the compressive strength of crumb rubber concrete paving blocks
per: Ling, Tung Chai, et al.
Publicat: (2007)

Influence of different curing methods on the compressive strength of ultra-high-performance concrete : A comprehensive review
per: Hamada, Hussein Mahmood, et al.
Publicat: (2022)

Behaviour of Metakaolin Concrete in Different Curing Condition
per: M. N., Muhd Sidek, et al.
Publicat: (2013)

Relationships between compressive strength of cement-slag mortars under air and water curing regimes
per: Sajedi, F., et al.
Publicat: (2012)

Effect of Curing Regime on Compressive Strength of Aerated Concrete Containing Palm Oil Fuel Ash as Partial Sand Replacement
per: Fadzil, Mat Yahaya, et al.
Publicat: (2015)

Effect of different curing method for coconut shell concrete
per: Vijendran, Morogan
Publicat: (2017)

Curing compounds for concrete
per: 8096 British Standards Institution
Publicat: (1992)

Curing compounds for concrete /
per: Australia. Department of Construction. Experimental Building Construction

Manufacturing of high-strength lightweight aggregate concrete using blended coarse lightweight aggregates
per: Aslam, M., et al.
Publicat: (2017)

The compressive strength & water absorption of chicken egg shell concrete
per: Yusman, Nuriman Nabila, et al.
Publicat: (2024)

Effect of blending time and crumb rubber content on properties of crumb rubber modified asphalt binder
per: Mashaan, N.S., et al.
Publicat: (2011)

Porosity and density characteristic of double-layer concrete paving blocks incorporating rubber granules
per: Euniza, J., et al.
Publicat: (2019)

Porosity and permeability properties of Nano black rice hush ash in porous concrete pavement
per: Mohd Rosli, Hainin, et al.
Publicat: (2019)

Evaluation of strength characteristics of mortar and concrete during curing using EMI and surface wave propagation techniques
per: Nelly Majain
Publicat: (2016)

Curing effect on the strength of cement mortar with bamboo biochar
per: Pragalanathan, Selvanathan, et al.
Publicat: (2024)

Strength properties of porous concrete pavement blended with nano black rice husk ash
per: Putra Jaya, Ramadhansyah, et al.
Publicat: (2019)

Effect of curing conditions on compressive strength of FA-POFA-based geopolymer mortar
per: Nor Hasanah, Abdul Shukor Lim, et al.
Publicat: (2018)

Compressive Strength and Density of Oil Palm Shell Lightweight Aggregate Concrete Containing Palm Oil Fuel Ash under Different Curing Regime
per: Khairunisa, Muthusamy, et al.
Publicat: (2015)

Effect of different curing methods on sewage sludge ash (SSA) concrete
per: Yee, Dar Luen
Publicat: (2016)

The effect of porosity of submerged break water structured on non-breaking wave transformation
per: Jaafar Sidek, Faridah, et al.
Publicat: (2007)

Exploring The Potential Of Saw Dust As Internal Curing Agent In Concrete Subjected To Different Curing Conditions
per: Ng, Shi Kin
Publicat: (2021)

The prediction of time-dependent deformation of normal strength concrete in tropical climate
per: Omar, Roslina
Publicat: (2009)

Development of blended cements for water proofing application
per: Radin Sumadi, Salihuddin, et al.
Publicat: (2008)

Influence Of Steam Curing On Engineering And Fluid Transport Properties Of High Strength Green Concrete Containing Palm Oil Fuel Ash
per: Zeyad, Abdullah Mohsen Ahmed
Publicat: (2013)

Effects of curing regimes and cement fineness on the compressive strength of ordinary Portland cement mortars
per: Sajedi, F., et al.
Publicat: (2011)

Effect of processed spent bleaching earth as partial cement replacement on thermal conductivity and porosity of foamed concrete
per: Mohammad Asyraf, Mohd Faridi Yusli
Publicat: (2018)

The effect of sawdust as self-curing agent in concrete
per: Muhd Fauzy Sulaiman, et al.
Publicat: (2024)

Self-Healing Behaviour of Pre-Cracked Pofa-Concretes in Different Curing Conditions
per: Khairul Anuar, Shahid, et al.
Publicat: (2014)

Self-Healing Behaviour of Pre-Cracked POFA-Concretes Under Curing Conditions
per: Khairul Anuar, Shahid, et al.
Publicat: (2013)

Investigative study on common curing methods in reducing plastic shrinkage in concrete slabs
per: Nurul Nadiah , Zulkefle
Publicat: (2012)

Strength properties and acid resistance performance of mortar and concrete using blended cockle shell ash and coal bottom ash
per: Nabilla, Mohamad
Publicat: (2023)

Effects of used engine oil on slump, compressive strength and oxygen permeability of normal and blended cement concrete
per: Nasir, Shafiq, et al.
Publicat: (2018)