Effect of application time of water-based curing compound on strength, hardness, sorptivity and porosity of blending concretes

Effect of application time of water-based curing compound on strength, hardness, sorptivity and porosity of blending concretes

This paper describes the effectiveness of water-based curing compound (WBCC) applied to concrete surface at different elapsed time from casting on the various properties of OPC, silica fume (SF) and fly ash (FA) concrete. It also signifies the importance of utilizing moist curing prior to applying W...

Bibliografske podrobnosti
Glavni avtor:	Abdelaziz, G. E.
Format:	Conference or Workshop Item
Jezik:	English
Izdano:	2006
Teme:	TA Engineering (General). Civil engineering (General)
Online dostop:	http://eprints.utm.my/255/1/GEABDELAZIZ2006_Effectofapplicationtimeof.pdf

Podobne knjige/članki

Water absorption and sorptivity of normal strength oil palm shell concrete
od: Fadhilah Hanim, Redzuan
Izdano: (2018)

The effect of curing time on compressive strength of composite cement concrete
od: Uddin, Md, et al.
Izdano: (2012)

The Effect of Different Curing Methods on the Compressive Strength of Eggshell Concrete
od: Tan, Yeong Yu, et al.
Izdano: (2017)

Effect of fly ash as partial cement replacement on workability and strength on water cured lightweight concrete
od: Nur Fazliana, Muhamad Razali
Izdano: (2018)

Effect of Curing Regime on Compressive Strength of Concrete Containing Malaysian Laterite Aggregate
od: Norul Wahida, Kamaruzaman, et al.
Izdano: (2012)

Strength and porosity of porous concrete pavement containing nano black rice husk ash
od: Putra Jaya, Ramadhansyah, et al.
Izdano: (2019)

Lightweight concrete made from crushed oil palm shell: tensile strength and effect of initial curing on compressive strength
od: Shafigh, P., et al.
Izdano: (2012)

Compressive strength of lightweight foamed concrete bricks with different size of hollow under different curing regime
od: Nur Afirah, Kamalrulzaman
Izdano: (2014)

Effect of curing conditions on the compressive strength of crumb rubber concrete paving blocks
od: Ling, Tung Chai, et al.
Izdano: (2007)

Influence of different curing methods on the compressive strength of ultra-high-performance concrete : A comprehensive review
od: Hamada, Hussein Mahmood, et al.
Izdano: (2022)

Behaviour of Metakaolin Concrete in Different Curing Condition
od: M. N., Muhd Sidek, et al.
Izdano: (2013)

Relationships between compressive strength of cement-slag mortars under air and water curing regimes
od: Sajedi, F., et al.
Izdano: (2012)

Effect of Curing Regime on Compressive Strength of Aerated Concrete Containing Palm Oil Fuel Ash as Partial Sand Replacement
od: Fadzil, Mat Yahaya, et al.
Izdano: (2015)

Effect of different curing method for coconut shell concrete
od: Vijendran, Morogan
Izdano: (2017)

Curing compounds for concrete
od: 8096 British Standards Institution
Izdano: (1992)

Curing compounds for concrete /
od: Australia. Department of Construction. Experimental Building Construction

Manufacturing of high-strength lightweight aggregate concrete using blended coarse lightweight aggregates
od: Aslam, M., et al.
Izdano: (2017)

The compressive strength & water absorption of chicken egg shell concrete
od: Yusman, Nuriman Nabila, et al.
Izdano: (2024)

Effect of blending time and crumb rubber content on properties of crumb rubber modified asphalt binder
od: Mashaan, N.S., et al.
Izdano: (2011)

Porosity and density characteristic of double-layer concrete paving blocks incorporating rubber granules
od: Euniza, J., et al.
Izdano: (2019)

Porosity and permeability properties of Nano black rice hush ash in porous concrete pavement
od: Mohd Rosli, Hainin, et al.
Izdano: (2019)

Evaluation of strength characteristics of mortar and concrete during curing using EMI and surface wave propagation techniques
od: Nelly Majain
Izdano: (2016)

Curing effect on the strength of cement mortar with bamboo biochar
od: Pragalanathan, Selvanathan, et al.
Izdano: (2024)

Strength properties of porous concrete pavement blended with nano black rice husk ash
od: Putra Jaya, Ramadhansyah, et al.
Izdano: (2019)

Effect of curing conditions on compressive strength of FA-POFA-based geopolymer mortar
od: Nor Hasanah, Abdul Shukor Lim, et al.
Izdano: (2018)

Compressive Strength and Density of Oil Palm Shell Lightweight Aggregate Concrete Containing Palm Oil Fuel Ash under Different Curing Regime
od: Khairunisa, Muthusamy, et al.
Izdano: (2015)

Effect of different curing methods on sewage sludge ash (SSA) concrete
od: Yee, Dar Luen
Izdano: (2016)

The effect of porosity of submerged break water structured on non-breaking wave transformation
od: Jaafar Sidek, Faridah, et al.
Izdano: (2007)

Exploring The Potential Of Saw Dust As Internal Curing Agent In Concrete Subjected To Different Curing Conditions
od: Ng, Shi Kin
Izdano: (2021)

The prediction of time-dependent deformation of normal strength concrete in tropical climate
od: Omar, Roslina
Izdano: (2009)

Development of blended cements for water proofing application
od: Radin Sumadi, Salihuddin, et al.
Izdano: (2008)

Influence Of Steam Curing On Engineering And Fluid Transport Properties Of High Strength Green Concrete Containing Palm Oil Fuel Ash
od: Zeyad, Abdullah Mohsen Ahmed
Izdano: (2013)

Effects of curing regimes and cement fineness on the compressive strength of ordinary Portland cement mortars
od: Sajedi, F., et al.
Izdano: (2011)

Effect of processed spent bleaching earth as partial cement replacement on thermal conductivity and porosity of foamed concrete
od: Mohammad Asyraf, Mohd Faridi Yusli
Izdano: (2018)

The effect of sawdust as self-curing agent in concrete
od: Muhd Fauzy Sulaiman, et al.
Izdano: (2024)

Self-Healing Behaviour of Pre-Cracked Pofa-Concretes in Different Curing Conditions
od: Khairul Anuar, Shahid, et al.
Izdano: (2014)

Self-Healing Behaviour of Pre-Cracked POFA-Concretes Under Curing Conditions
od: Khairul Anuar, Shahid, et al.
Izdano: (2013)

Investigative study on common curing methods in reducing plastic shrinkage in concrete slabs
od: Nurul Nadiah , Zulkefle
Izdano: (2012)

Strength properties and acid resistance performance of mortar and concrete using blended cockle shell ash and coal bottom ash
od: Nabilla, Mohamad
Izdano: (2023)

Effects of used engine oil on slump, compressive strength and oxygen permeability of normal and blended cement concrete
od: Nasir, Shafiq, et al.
Izdano: (2018)