Finite element analysis of rock compaction with capillary effect

Finite element analysis of rock compaction with capillary effect

Bibliographic Details
Main Author:	Lai, Thiam Chin
Format:	Thesis
Published:	2003
Subjects:	TN Mining engineering. Metallurgy

Similar Items

Finite element modelling of the non-linear behaviour of rock-structure interaction
by: Chen, Seong Sern
Published: (2003)

Finite element modelling for predicting sand production in perforation tunnel
by: Sim , Soon Hin
Published: (2004)

The effect of compaction pressure and sintering time on mechanical properties of a waste metal powder
by: Ahmad Syazwan, Mohammad
Published: (2012)

Measurement of thermoelectric potential coupling coefficient for sandstone rock sample
by: Jaafar, Mohd. Zaidi, et al.
Published: (2015)

Application Of Unmanned Aerial Vehicle (UAV) Photogrammetry Method For Rock Mass Rating Analysis Of A Rock Slope
by: Nor Afiqah Adriana, Roslan
Published: (2022)

Multiple performance optimization for the best metal injection molding green compact
by: Jamaludin, Khairur R., et al.
Published: (2011)

Analysis Of Rock Fragmentation Using Wipfrag At Lafargeholcim Rawang Quarry, Selangor
by: Abdul Rahman, Najihatul Nabihah
Published: (2018)

Effect Of Blast Designs On Rock Fragmentation At Lafarge Kanthan Quarry, Chemor, Perak
by: Awang Kechik, Nur Aliah Hazirah
Published: (2018)

Effect Of Controllable Parameters On Rock Fragmentation At Imerys Mineral (M) Sdn Bhd
by: Zam Hariro, Aini Yusriena
Published: (2022)

Identification On Mineralogical And Mechanical Properties Of Rock
by: Saril, Muhammad Amin
Published: (2022)

Comparison Analysis Of Rock Fragmentation After Blasting Between Imagej Analizer And Wipfrag Software
by: Abdul Jalil, Nurhanisah
Published: (2022)

Effect Of Compaction Pressure And Addition Of Silicon On Microstructure And Compressive Properties Of Porous Magnesium
by: Ooi, Lhaang Chee
Published: (2018)

Rock Slope Stability Analysis Using Photogrammetric Method At Hume Cement Quarry, Gopeng, Perak
by: Juhari, Aisyah Shahirah
Published: (2018)

Microstructural evaluation and corrosion behaviour of Fe-Cr-Ni-Mn-Co AND AI0.5-Fe-Cr-Ni-Mn-Co highentropy alloys (HEA) with elemental additions / Siti Sarah Mohd Pauzi
by: Mohd Pauzi, Siti Sarah
Published: (2018)

Characteristic And Potential Of Perlis Carbonate Rock In The Downstream Industries
by: Abd Rahim, Muhammad Anwar
Published: (2022)

Physical And Chemical Characterization Of Granitic Rock For Ree Utilization
by: Kamso, Nurul Syazni
Published: (2022)

A Study On The Relationship Of Rock Strenght And Grindability Of Limestone, Granite And Metallic Ore
by: Ahmad Romil, Rozaida
Published: (2018)

Study On The Rock Quality Designation (RQD) And Groundwater Cavity Of The Kuala Lumpur Limestone Formation
by: Adzaman, Amir Faisal
Published: (2022)

The effect of grain size distributions on acoutic wave velocities in porous rocks
by: Samsuri, Ariffin, et al.
Published: (2005)

Optimize production through reservoir rock compaction control
by: Samsuri, Ariffin, et al.
Published: (2004)

Preparation, characterisation and performance of polyvinylidene fluoride membrane for sodium chloride rejection in direct contact membrane distillation
by: Chong, Kokchung, et al.
Published: (2014)

Ultrafiltration as a pretreatment for seawater desalination: a review
by: Lau, Woei Jye, et al.
Published: (2014)

Sequential Leaching Of Malaysian’s Ion Adsorption Clay Rare Earth Element
by: Haris, Nuradrina
Published: (2022)

Effects Of Graphene Oxide Coating On The Properties Of Polyurethane/Nanofiller Nanocomposite Foams
by: Wing Foong, Chin
Published: (2022)

A Study On The Production Of High Quality Aggregates From Metso Barmac Rock On Rock Vertical Shaft Impact Crusher And Cone Crusher
by: Mahathir Amir,
Published: (2009)

Simulation studies of mineral processing
by: Aziz, Badhrulhisham Abdul, et al.
Published: (2017)

Characteristic and performance of polyvinylidene fluoride membranes blended with lithium chloride in direct contact membrane distillation
by: Lai, Soon Onn, et al.
Published: (2014)

Treatment of aerobic treated palm oil mill effluent (AT-POME) by using TiO2 Photocatalytic process
by: Goh, Pei Sean, et al.
Published: (2014)

The effect of ultrasonic waves on oil viscosity
by: Hamidi, H., et al.
Published: (2014)

UNIVERSITI SAINS MALAYSIA First Semester Examination 2016/2017 Academic Session December 2016 / January 2017 EBB 344/3 — Mechanical Metallurgy [Metalurgi Mekanikal] Duration : 3 hours [Masa : 3 jam]
by: Bahan & Sumber Mineral, Pusat Pengajian Kejuruteraan
Published: (2017)

UNIVERSITI SAINS MALAYSIA First Semester Examination 2016/2017 Academic Session December 2016 / January 2017 EBB 441/3 — Applied Metallurgy [Metalurgi Gunaan] Duration : 3 hours [Masa : 3 jam]
by: Bahan & Sumber Mineral, Pusat Pengajian Kejuruteraan
Published: (2017)

Evaluation of effectiveness parameters on gas dehydration plant
by: Nuramalina Munirah, Rosli
Published: (2013)

Design and analysis of steeps and steep wave flexible riser systems
by: Mohd. Aziz, Shahrul Faiz
Published: (1994)

Effect Of Resistance Spot Welding Parameters On Copper And Brass
by: Mat Saad, Nurihal Hanim
Published: (2012)

Evaluation of effectiveness parameters on gas dehydration plant (simulation)
by: Fong Ling, Tan
Published: (2014)

The effect of matrix acidizing on the compressive strength of sandstone formation
by: Ismail, A. S. I., et al.
Published: (2011)

Effect of Applied Potential on the Formation of Self-Organized TiO2 Nanotube Arrays and Its Photoelectrochemical Response
by: Chin, Wei Lai, et al.
Published: (2011)

The effect of eccentric drilling on formation damage to berea sandstone formation
by: Teow, Ket Seang
Published: (2003)

The Effect Of Alloying Elements On Wear Behaviour Of Ni-Al
by: Ishak, Mohamad Izha
Published: (2004)

Effect of starch addition on microstructure and strength of ball clay membrane
by: Mohamed Bazin, Maisarah, et al.
Published: (2014)