The influence of lubricant viscosoty in cold work forward extrusion using micro-pits tool
The present research concerns on the study of the effects of micro–pits arrays formed on taper die using cold forward plane strain extrusion experiments. Each pit was of reverse pyramids configuration having 330 microns diagonal length. The pits were 860 microns apart each others. Two additive free...
| Main Authors: | , , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Penerbit UTM
2012
|
| Subjects: | |
| Online Access: | http://eprints.utm.my/47628/1/SyahrullailSamion2012_Theinfluenceoflubricantviscosoty.pdf |
| _version_ | 1796859176610168832 |
|---|---|
| author | A., Norhayati Maizan, S. Zin, H. M. Yahya, Wira Jazair Wan Nik, Wan Sani Samion, Syahrullail |
| author_facet | A., Norhayati Maizan, S. Zin, H. M. Yahya, Wira Jazair Wan Nik, Wan Sani Samion, Syahrullail |
| author_sort | A., Norhayati |
| collection | ePrints |
| description | The present research concerns on the study of the effects of micro–pits arrays formed on taper die using cold forward plane strain extrusion experiments. Each pit was of reverse pyramids configuration having 330 microns diagonal length. The pits were 860 microns apart each others. Two additive free paraffinic mineral oils with low viscosity (P2) and high viscosity (P3) were used in this experimental work. The experimental results were compared with the results obtained from the plane strain extrusion experimental works with taper die without micro–pits (NA). The experimental results focused on the extrusion load, billet surface roughness and billet grid pattern on inclination slope. From the results, the existence of the micro–pits array on the taper die surface affected the extrusion load. At the same time, the micro–pits array affected the extruded billet surface roughness after the experiments. From this experiment, we could conclude that the micro–pits formed on the taper die (PA) would control the frictional constraint on the taper die compared to those without the micro–pits (NA). However, high viscosity lubricant (P3) was found to cause more effects compared to low viscosity lubricant (P2) |
| first_indexed | 2024-03-05T19:23:19Z |
| format | Article |
| id | utm.eprints-47628 |
| institution | Universiti Teknologi Malaysia - ePrints |
| language | English |
| last_indexed | 2024-03-05T19:23:19Z |
| publishDate | 2012 |
| publisher | Penerbit UTM |
| record_format | dspace |
| spelling | utm.eprints-476282018-10-14T08:21:49Z http://eprints.utm.my/47628/ The influence of lubricant viscosoty in cold work forward extrusion using micro-pits tool A., Norhayati Maizan, S. Zin, H. M. Yahya, Wira Jazair Wan Nik, Wan Sani Samion, Syahrullail TJ Mechanical engineering and machinery The present research concerns on the study of the effects of micro–pits arrays formed on taper die using cold forward plane strain extrusion experiments. Each pit was of reverse pyramids configuration having 330 microns diagonal length. The pits were 860 microns apart each others. Two additive free paraffinic mineral oils with low viscosity (P2) and high viscosity (P3) were used in this experimental work. The experimental results were compared with the results obtained from the plane strain extrusion experimental works with taper die without micro–pits (NA). The experimental results focused on the extrusion load, billet surface roughness and billet grid pattern on inclination slope. From the results, the existence of the micro–pits array on the taper die surface affected the extrusion load. At the same time, the micro–pits array affected the extruded billet surface roughness after the experiments. From this experiment, we could conclude that the micro–pits formed on the taper die (PA) would control the frictional constraint on the taper die compared to those without the micro–pits (NA). However, high viscosity lubricant (P3) was found to cause more effects compared to low viscosity lubricant (P2) Penerbit UTM 2012 Article PeerReviewed application/pdf en http://eprints.utm.my/47628/1/SyahrullailSamion2012_Theinfluenceoflubricantviscosoty.pdf A., Norhayati and Maizan, S. and Zin, H. M. and Yahya, Wira Jazair and Wan Nik, Wan Sani and Samion, Syahrullail (2012) The influence of lubricant viscosoty in cold work forward extrusion using micro-pits tool. Jurnal Teknologi (Sciences and Engineering), 58 (SUP. 2). pp. 89-93. ISSN 0127-9696 https://dx.doi.org/10.11113/jt.v58.1555 DOI: 10.11113/jt.v58.1555 |
| spellingShingle | TJ Mechanical engineering and machinery A., Norhayati Maizan, S. Zin, H. M. Yahya, Wira Jazair Wan Nik, Wan Sani Samion, Syahrullail The influence of lubricant viscosoty in cold work forward extrusion using micro-pits tool |
| title | The influence of lubricant viscosoty in cold work forward extrusion using micro-pits tool |
| title_full | The influence of lubricant viscosoty in cold work forward extrusion using micro-pits tool |
| title_fullStr | The influence of lubricant viscosoty in cold work forward extrusion using micro-pits tool |
| title_full_unstemmed | The influence of lubricant viscosoty in cold work forward extrusion using micro-pits tool |
| title_short | The influence of lubricant viscosoty in cold work forward extrusion using micro-pits tool |
| title_sort | influence of lubricant viscosoty in cold work forward extrusion using micro pits tool |
| topic | TJ Mechanical engineering and machinery |
| url | http://eprints.utm.my/47628/1/SyahrullailSamion2012_Theinfluenceoflubricantviscosoty.pdf |
| work_keys_str_mv | AT anorhayati theinfluenceoflubricantviscosotyincoldworkforwardextrusionusingmicropitstool AT maizans theinfluenceoflubricantviscosotyincoldworkforwardextrusionusingmicropitstool AT zinhm theinfluenceoflubricantviscosotyincoldworkforwardextrusionusingmicropitstool AT yahyawirajazair theinfluenceoflubricantviscosotyincoldworkforwardextrusionusingmicropitstool AT wannikwansani theinfluenceoflubricantviscosotyincoldworkforwardextrusionusingmicropitstool AT samionsyahrullail theinfluenceoflubricantviscosotyincoldworkforwardextrusionusingmicropitstool AT anorhayati influenceoflubricantviscosotyincoldworkforwardextrusionusingmicropitstool AT maizans influenceoflubricantviscosotyincoldworkforwardextrusionusingmicropitstool AT zinhm influenceoflubricantviscosotyincoldworkforwardextrusionusingmicropitstool AT yahyawirajazair influenceoflubricantviscosotyincoldworkforwardextrusionusingmicropitstool AT wannikwansani influenceoflubricantviscosotyincoldworkforwardextrusionusingmicropitstool AT samionsyahrullail influenceoflubricantviscosotyincoldworkforwardextrusionusingmicropitstool |