Solutions of Boreholes Problem by Analytical Method

Solutions of Boreholes Problem by Analytical Method

Bibliographic Details
Main Author:	Tuan Mahmood, Tuan Baharom
Format:	Article
Language:	English
Published:	Fakulti Ukur dan Harta Tanah 1991
Subjects:	TA Engineering (General). Civil engineering (General)
Online Access:	http://eprints.utm.my/4911/1/solutions_boreholes_problem.pdf

Similar Items

Characterization of granitic subsurface profile by borehole logging and seismic refraction method
by: Ahmadol, Afifi Fahmi
Published: (2020)

Correlation between seismic refraction and borehole data for subsurface evaluation
by: Mohamad, Edy Tonnizam, et al.
Published: (2015)

Interrelationship between borehole lithology and electrical resistivity for geotechnical site investigation
by: Ishak, Mohd. Fakhrurrazi, et al.
Published: (2022)

The evaluation of borehole imaging result comparing with cores in Sarvak fractured and non-fractured reservoir
by: Zohreh, M., et al.
Published: (2016)

Fracture characterization using downhole camera in deep boreholes at Southern Johor Bahru, Malaysia
by: Rathinasamy, Vynotdni, et al.
Published: (2022)

Performance of integral bridge with various span lengths
by: Tuan Abdul Manaf, Tuan Khusairry
Published: (2014)

Food waste solution at home: conventional and rapid composting techniques
by: Mohamed Raimi, H. S., et al.
Published: (2020)

Kuantan - Mars on Earth: Environmental Problems and Solutions
by: Mohd Yuhyi, Mohd Tadza
Published: (2016)

Numerical solution of boundary layer problem due to moving flat plate using Runge-Kutta methods
by: Syed Abdul Kadir, Syed Khalid
Published: (2007)

Subcontractor selection method using analytic hierarchy process
by: Manoharan, Ravichandran
Published: (2005)

Performance of solid material diverter subject to impact collision with respect to angle variation
by: Tuan Lah, Tengku Firdaus
Published: (2017)

Use of the simplex method to optimize analytical condition in structural analysis
by: Hashamdar, H., et al.
Published: (2011)

Analytical study of end-plate connection on cruciform column section
by: Tan, Boon Cheik, et al.
Published: (2015)

Investigation on the effect of different moisture contents on aggregated soil structure and strength
by: Tengku Nurul Adiana, Tuan Ismail
Published: (2014)

Selection of Method in Construction Industry by using Analytical Hierarchy Process (AHP)
by: Putri Zulaiha, Razi, et al.
Published: (2020)

Selection of the industrilized building material supplier by analytic hierarchy process method
by: Moravveji, Mohammad Yousef
Published: (2013)

Solution to problems in structural steel design to BS 5950:Part 1: 2000
by: Osman, Mohd. Hanim, et al.
Published: (2008)

An artificial neural network aided solution to the problem of voltage stability in power systems
by: Moghavvemi, M., et al.
Published: (1996)

Interrelationship between borehole lithology and electrical resistivity for geotechnical site investigation
by: M. F., Ishak, et al.
Published: (2022)

Overview of analytical hierarchy process decision making method for construction risk management
by: Putri Zulaiha, Razi, et al.
Published: (2019)

Self-adaptive conjugate method for a robust and efficient performance measure approach for reliability-based design optimization
by: Keshtegar, Behrooz, et al.
Published: (2018)

Applying an integrated route optimization method as a solution to the problem of waste collection
by: Salleh, Abdul Hakim, et al.
Published: (2016)

APPLYING AN INTEGRATED ROUTE OPTIMIZATION METHOD AS A SOLUTION TO THE PROBLEM OF WASTE COLLECTION
by: Salleh, Abdul Hakim, et al.
Published: (2016)

Development of the Analytical Hierarchy Process (AHP) method for rehabilitation project ranking before disasters
by: Yadollahi, M., et al.
Published: (2012)

Development of analytical hierarchy process (AHP) method for rehabilition project ranking before disaster
by: Mohamad Zin, Rosli, et al.
Published: (2011)

The potential of napier grass leaf fibres as an acoustic absorber
by: Haron, Zaiton, et al.
Published: (2020)

Hydrodynamic modeling of Sungai Johor estuary using EFDC
by: Hashim, Noor Baharim, et al.
Published: (2007)

Exact solution for Rayleigh-Stokes problems of an Oldroyd-b fluid in a porous medium and rotating frame
by: Abdul Aziz, Zainal, et al.
Published: (2012)

Structure of SNO2 nanoparticles by sol-gel method
by: Aziz, Madzlan, et al.
Published: (2012)

Effect of magnesium chloride solution on the physico-chemical characteristics of tropical peat
by: Latifi, Nima, et al.
Published: (2016)

Effect of pineapple leaf fibre composite material thickness on sound absorption performance.
by: Tuan Mat, Tuan Nurul Farazila, et al.
Published: (2023)

Analytical and experimental investigation on slip-in gusset plate connection for double c-channel sections of cold-formed steel
by: Aminuddin, Kiagus, et al.
Published: (2020)

A fuzzy analytic network process method for risk prioritization in freeway PPP projects: an Iranian case study
by: Valipour, Alireza, et al.
Published: (2015)

The effect of perforations on built-up open section cold-formed steel beam
by: Siti Sharina, Baharom
Published: (2018)

The effect of screw spacing on the Profiled Steel Sheet Dry Board (PSSDB) with foamed concrete infill floor panel stiffness
by: Nor Asmaq, Baharom
Published: (2015)

Experimental and analytical study of various shear connectors used for cold-formed steel-ferrocement composite beam
by: Saggaff, Anis, et al.
Published: (2014)

Experimental evaluation of active force vibration control of a flexible structure using smart material
by: Mat Darus, Intan Zaurah, et al.
Published: (2011)

A numerical solution for nonlinear heat transfer of fin problems using the Haar wavelet quasilinearization method
by: Mt Aznam, Suazlan, et al.
Published: (2019)

Problems associated with plate bonding methods of strengthening reinforced concrete beams
by: Jumaat, Mohd Zamin, et al.
Published: (2006)

PHYSICAL CHARACTERIZATION OF POLYURETHANECLAY COMPOSITE DOPED WITH TREATED AND UNTREATED PU WASTE AS FILLER FOR SUBGRADE LAYER APPLICATIONS
by: Atil, Aida Atiqah, et al.
Published: (2023)