A study of extrusion shear in the spinning of cellulose acetate hollow fiber membranes for reverse osmosis

The influence of dope extrusion rate on the morphology and performance of reverse osmosis hollow fibers were investigated. Hollow fiber reverse osmosis membranes were produced using a dry/wet spinning process with forced convection and spun at various shear rates ranging from 2.5 cm3/min to 5.0cm3/m...

Full description

Bibliographic Details
Main Authors: Idris, Ani, Ismail, Ahmad Fauzi, Shilton, S. J.
Format: Article
Language:English
Published: Faculty of Chemical and Natural Resources Engineering, UTM 2001
Subjects:
Online Access:http://eprints.utm.my/5020/1/AniIdris2001_AStudyOfExtrusionShear.pdf
_version_ 1825909663553552384
author Idris, Ani
Ismail, Ahmad Fauzi
Shilton, S. J.
author_facet Idris, Ani
Ismail, Ahmad Fauzi
Shilton, S. J.
author_sort Idris, Ani
collection ePrints
description The influence of dope extrusion rate on the morphology and performance of reverse osmosis hollow fibers were investigated. Hollow fiber reverse osmosis membranes were produced using a dry/wet spinning process with forced convection and spun at various shear rates ranging from 2.5 cm3/min to 5.0cm3/min. In this case, the residence time is fixed at 0.615s in order to decouple the shear effect from the forced convection effect. Separation performance of the hollow fibre membranes was evaluated using salt water of concentration 1000ppm at 100psig. Experimental results showed that a higher dope extrusion shear rate apparently resulted in a reverse osmosis hollow fibers with a thinner active layer. As a consequence, rejection rate of these membranes are increased. This may be the result of induced molecular orientation in the active layer. However a critical shear rate existed beyond which the rejection rate decreases. This was attributed to the development of surface pores as the active layer thins. Results suggested that it is possible to increase the performance of reverse osmosis hollow fibers by using the optimum shear rate. Hollow fibers with rejection rates as high as 95.5% could be produced with proper control in the rheological aspect.
first_indexed 2024-03-05T18:05:31Z
format Article
id utm.eprints-5020
institution Universiti Teknologi Malaysia - ePrints
language English
last_indexed 2024-03-05T18:05:31Z
publishDate 2001
publisher Faculty of Chemical and Natural Resources Engineering, UTM
record_format dspace
spelling utm.eprints-50202010-06-01T03:22:47Z http://eprints.utm.my/5020/ A study of extrusion shear in the spinning of cellulose acetate hollow fiber membranes for reverse osmosis Idris, Ani Ismail, Ahmad Fauzi Shilton, S. J. T Technology (General) The influence of dope extrusion rate on the morphology and performance of reverse osmosis hollow fibers were investigated. Hollow fiber reverse osmosis membranes were produced using a dry/wet spinning process with forced convection and spun at various shear rates ranging from 2.5 cm3/min to 5.0cm3/min. In this case, the residence time is fixed at 0.615s in order to decouple the shear effect from the forced convection effect. Separation performance of the hollow fibre membranes was evaluated using salt water of concentration 1000ppm at 100psig. Experimental results showed that a higher dope extrusion shear rate apparently resulted in a reverse osmosis hollow fibers with a thinner active layer. As a consequence, rejection rate of these membranes are increased. This may be the result of induced molecular orientation in the active layer. However a critical shear rate existed beyond which the rejection rate decreases. This was attributed to the development of surface pores as the active layer thins. Results suggested that it is possible to increase the performance of reverse osmosis hollow fibers by using the optimum shear rate. Hollow fibers with rejection rates as high as 95.5% could be produced with proper control in the rheological aspect. Faculty of Chemical and Natural Resources Engineering, UTM 2001 Article PeerReviewed application/pdf en http://eprints.utm.my/5020/1/AniIdris2001_AStudyOfExtrusionShear.pdf Idris, Ani and Ismail, Ahmad Fauzi and Shilton, S. J. (2001) A study of extrusion shear in the spinning of cellulose acetate hollow fiber membranes for reverse osmosis. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 127-132.
spellingShingle T Technology (General)
Idris, Ani
Ismail, Ahmad Fauzi
Shilton, S. J.
A study of extrusion shear in the spinning of cellulose acetate hollow fiber membranes for reverse osmosis
title A study of extrusion shear in the spinning of cellulose acetate hollow fiber membranes for reverse osmosis
title_full A study of extrusion shear in the spinning of cellulose acetate hollow fiber membranes for reverse osmosis
title_fullStr A study of extrusion shear in the spinning of cellulose acetate hollow fiber membranes for reverse osmosis
title_full_unstemmed A study of extrusion shear in the spinning of cellulose acetate hollow fiber membranes for reverse osmosis
title_short A study of extrusion shear in the spinning of cellulose acetate hollow fiber membranes for reverse osmosis
title_sort study of extrusion shear in the spinning of cellulose acetate hollow fiber membranes for reverse osmosis
topic T Technology (General)
url http://eprints.utm.my/5020/1/AniIdris2001_AStudyOfExtrusionShear.pdf
work_keys_str_mv AT idrisani astudyofextrusionshearinthespinningofcelluloseacetatehollowfibermembranesforreverseosmosis
AT ismailahmadfauzi astudyofextrusionshearinthespinningofcelluloseacetatehollowfibermembranesforreverseosmosis
AT shiltonsj astudyofextrusionshearinthespinningofcelluloseacetatehollowfibermembranesforreverseosmosis
AT idrisani studyofextrusionshearinthespinningofcelluloseacetatehollowfibermembranesforreverseosmosis
AT ismailahmadfauzi studyofextrusionshearinthespinningofcelluloseacetatehollowfibermembranesforreverseosmosis
AT shiltonsj studyofextrusionshearinthespinningofcelluloseacetatehollowfibermembranesforreverseosmosis