Removal of heavy metal ions with acid activated carbons derived from oil palm and coconut shells

Removal of heavy metal ions with acid activated carbons derived from oil palm and coconut shells

In this work, batch adsorption experiments were carried out to investigate the suitability of prepared acid activated carbons in removing heavy metal ions such as nickel(II), lead(II) and chromium(VI). Acid activated carbons were obtained from oil palm and coconut shells using phosphoric acid under...

Full description

Bibliographic Details
Main Authors:	Md. Rahman, Mokhlesur, Mohammad, Adil, Mohd. Yusof, Alias, Kamaruzzaman, Yunus B., Ansary, Rezaul H.
Format:	Article
Published:	MDPI AG 2014
Subjects:	TK Electrical engineering. Electronics Nuclear engineering

Similar Items

Removal of Heavy Metal Ions with Acid Activated Carbons Derived from Oil Palm and Coconut Shells
by: Mokhlesur M. Rahman, et al.
Published: (2014-05-01)

Removal of heavy metal ions with acid activated carbons derived from oil palm and coconut shells
by: Rahman, Md. Mokhlesur, et al.
Published: (2014)

Porosity development in activated carbon from palm kernel and coconut shell by chemical activation method
by: Rahman, Md. Mokhlesur, et al.
Published: (2012)

Porosity development in activated carbon from palm kernel and coconut shell by chemical activation method
by: Md. Mokhlesur , Rahman, et al.
Published: (2011)

The determination of some toxic elements in drinking water by inductively coupled plasma mass spectrometry
by: Rahman, M. M., et al.
Published: (2012)

Dielectric Properties Of Virgin Coconut Oil
by: Mat Sauki, Siti Syafiqah
Published: (2018)

A new streamer discharge chamber for nox removal from heavy vehicles: a simulation study
by: Mohd. Noor, Hafidah
Published: (2015)

The effect of high intensity pulsed electric field on the coconut milk
by: Zainol, Mohd. Zaifulrizal
Published: (2010)

A tracable proactive anonymous electronic cash
by: Chang, Yu Cheng, et al.
Published: (2000)

Fuzzy logic model for deodorizer troubleshooting in palm oil refining
by: Salleh, Intan Suhairi, et al.
Published: (2012)

Measurement and modeling of RFID propagation channel in palm oil trees
by: A., Arsad, et al.
Published: (2012)

Relative wavelet energy as a tool to select suitable wavelet for artifact removal in EEG
by: Mohd. Daud, Salwani, et al.
Published: (2005)

Transient analysis of functionally graded cylindrical shell under impulse local loads
by: Nezhadi, A., et al.
Published: (2011)

Image analysis techniques for ripeness detection of palm oil fresh fruit bunches
by: Ghazalli, Shuwaibatul Aslamiah, et al.
Published: (2019)

Adsorption site of gas molecules on defective armchair graphene nanoribbon formed through ion bombardment
by: Auzar, Zuriana, et al.
Published: (2018)

Feasibility studies of treated used cooking palm oil as precursor for bio-lubricant.
by: Azhari, Muhamad Azwar, et al.
Published: (2023)

Electrochemical impedance spectroscopy for palm cooking oil discriminator using planar electromagnetic sensor array
by: Amsyar Azman, A., et al.
Published: (2016)

Electrochemical Properties of Carbon from Oil Palm Kernel Shell for High Performance Supercapacitors
by: Rajan, Jose, et al.
Published: (2015)

Multispectral palm vein image fusion for contactless palm vein verification system
by: Soh, Shi Chuan
Published: (2018)

MKAS : A modular knockout ATM switch
by: Waqas, Muhammad, et al.
Published: (2000)

PLC-based PID controller for real-time pH neutralization process using palm oil mill effluent.
by: Zainal, Azavitra, et al.
Published: (2023)

Microwave steam activation, an innovative pyrolysis approach to convert waste palm shell into highly microporous activated carbon
by: Yek, Peter Nai Yuh, et al.
Published: (2019)

Carbonized green mussel shell as heavy metal removal
by: A. Rahman, Nur Afifah, et al.
Published: (2017)

Impact of link elevation angles on rain attenuation statistics in heavy rain region predicted using the synthetic storm technique
by: Jong, S. L., et al.
Published: (2017)

Low noise and low power ECG amplifier using cmos 0.13μm technology
by: Kamaruzzaman, Zulfadli
Published: (2018)

Object's shadow removal with removal validation
by: Syed Abu Bakar, Syed Abdul Rahman, et al.
Published: (2007)

A Nonlinear Autoregressive Exogenous Neural Network (NARX) model for the prediction of the pH neutralization process for Palm Oil Mill Effluent
by: Zainal, Azavitra, et al.
Published: (2022)

A Nonlinear Autoregressive Exogenous Neural Network (NARX) model for the prediction of the pH neutralization process for palm oil mill effluent
by: Zainal, Azavitra, et al.
Published: (2022)

Corrosion behaviour of aluminium alloy in palm oil methyl ester (b100)
by: Wan Nik, W. B., et al.
Published: (2012)

A review on the current state of artifact removal methods for electroencephalogram signals
by: Abd. Rahman, Faridah, et al.
Published: (2015)

Removal of object's shadow
by: Mat Ibrahim, Masrullizam
Published: (2006)

Voltage Sag and Mitigation Using Dynamic Voltage Restorer (DVR) System
by: Wahab, Shairul Wizmar, et al.
Published: (2006)

Process design in degumming and bleaching of palm oil
by: Norazlan, Morad, et al.
Published: (2006)

Defect-free mixed mono- and bi-layer graphene synthesized from refined palm oil by thermal chemical vapor deposition
by: Jalani, D., et al.
Published: (2016)

Semi analytical modeling of quantum capacitance of graphene-based ion sensitive field effect transistor
by: Yusof, Rubiyah, et al.
Published: (2014)

Performance of time diversity technique in heavy rain region
by: Jong, S. L., et al.
Published: (2015)

Enhancement of grounding system using oil palm ashes
by: Mohammad Ali, Abdul Rasyid
Published: (2010)

Infrared physical layer for outdoor portable palm device
by: Idrus, Sevia Mahdaliza, et al.
Published: (2007)

Electrical capacitance tomography for imaging a mixture of water and oil
by: Mohd. Yunus, Fazlul Rahman
Published: (2008)

Asas litar elektrik edisi keempat
by: Shaikh Abd. Rahman, Shaikh Nasir (Penterjemah), et al.
Published: (1996)