Injection molding parameter optimization of titanium alloy powder mix with palm stearin and polyethylene for green defects using taguchi method
This paper outlines the Taguchi Method using L?? (3??) orthogonal array, which is applied to optimize injectin molding parameters in Metal Injection Molding (MIM) process using titanium alloy powder mix with palm stearin and polyethylene. Parameters optimized were injection pressure, injection tempe...
| Main Authors: | , , , , , |
|---|---|
| Format: | Conference or Workshop Item |
| Language: | English |
| Published: |
2009
|
| Subjects: | |
| Online Access: | http://eprints.utm.my/9769/1/O2-Hafiez.pdf |
| _version_ | 1796854576797712384 |
|---|---|
| author | Mohamad Nor, Nor Hafiez Muhamad, Norhamidi Ismail, M. H. Jamaludin, Khairur Rijal Ahmad, S. Ibrahim, M. H. I. |
| author_facet | Mohamad Nor, Nor Hafiez Muhamad, Norhamidi Ismail, M. H. Jamaludin, Khairur Rijal Ahmad, S. Ibrahim, M. H. I. |
| author_sort | Mohamad Nor, Nor Hafiez |
| collection | ePrints |
| description | This paper outlines the Taguchi Method using L?? (3??) orthogonal array, which is applied to optimize injectin molding parameters in Metal Injection Molding (MIM) process using titanium alloy powder mix with palm stearin and polyethylene. Parameters optimized were injection pressure, injection temperature, powder loading, mold temperature, holding pressure and injection speed. Classical analysis of variance (ANOVA) for the smallest the best signal to noise ratio (S/N) presents the significance of each parameters and interaction. A green defects was assumed to be the quality characteristics (response) and it has been measured using parameter design for discrete data technique. From the ANOVA, the injection pressure has the highest percentage of contribution to the green defects followed by interaction of injection pressure-powder leading and interaction of injection pressure-injection temperature |
| first_indexed | 2024-03-05T18:16:08Z |
| format | Conference or Workshop Item |
| id | utm.eprints-9769 |
| institution | Universiti Teknologi Malaysia - ePrints |
| language | English |
| last_indexed | 2024-03-05T18:16:08Z |
| publishDate | 2009 |
| record_format | dspace |
| spelling | utm.eprints-97692017-10-24T04:22:40Z http://eprints.utm.my/9769/ Injection molding parameter optimization of titanium alloy powder mix with palm stearin and polyethylene for green defects using taguchi method Mohamad Nor, Nor Hafiez Muhamad, Norhamidi Ismail, M. H. Jamaludin, Khairur Rijal Ahmad, S. Ibrahim, M. H. I. TS Manufactures This paper outlines the Taguchi Method using L?? (3??) orthogonal array, which is applied to optimize injectin molding parameters in Metal Injection Molding (MIM) process using titanium alloy powder mix with palm stearin and polyethylene. Parameters optimized were injection pressure, injection temperature, powder loading, mold temperature, holding pressure and injection speed. Classical analysis of variance (ANOVA) for the smallest the best signal to noise ratio (S/N) presents the significance of each parameters and interaction. A green defects was assumed to be the quality characteristics (response) and it has been measured using parameter design for discrete data technique. From the ANOVA, the injection pressure has the highest percentage of contribution to the green defects followed by interaction of injection pressure-powder leading and interaction of injection pressure-injection temperature 2009-08-12 Conference or Workshop Item PeerReviewed application/pdf en http://eprints.utm.my/9769/1/O2-Hafiez.pdf Mohamad Nor, Nor Hafiez and Muhamad, Norhamidi and Ismail, M. H. and Jamaludin, Khairur Rijal and Ahmad, S. and Ibrahim, M. H. I. (2009) Injection molding parameter optimization of titanium alloy powder mix with palm stearin and polyethylene for green defects using taguchi method. In: 3rd Powder Metallurgy Symposium & Exhibition 2009, 12- 13 August 2009, Kuala Lumpur, Malaysia. http://www.mpif.org/Meetings/2010/pdf/10_tech_sess.pdf |
| spellingShingle | TS Manufactures Mohamad Nor, Nor Hafiez Muhamad, Norhamidi Ismail, M. H. Jamaludin, Khairur Rijal Ahmad, S. Ibrahim, M. H. I. Injection molding parameter optimization of titanium alloy powder mix with palm stearin and polyethylene for green defects using taguchi method |
| title | Injection molding parameter optimization of titanium alloy powder mix with palm stearin and polyethylene for green defects using taguchi method |
| title_full | Injection molding parameter optimization of titanium alloy powder mix with palm stearin and polyethylene for green defects using taguchi method |
| title_fullStr | Injection molding parameter optimization of titanium alloy powder mix with palm stearin and polyethylene for green defects using taguchi method |
| title_full_unstemmed | Injection molding parameter optimization of titanium alloy powder mix with palm stearin and polyethylene for green defects using taguchi method |
| title_short | Injection molding parameter optimization of titanium alloy powder mix with palm stearin and polyethylene for green defects using taguchi method |
| title_sort | injection molding parameter optimization of titanium alloy powder mix with palm stearin and polyethylene for green defects using taguchi method |
| topic | TS Manufactures |
| url | http://eprints.utm.my/9769/1/O2-Hafiez.pdf |
| work_keys_str_mv | AT mohamadnornorhafiez injectionmoldingparameteroptimizationoftitaniumalloypowdermixwithpalmstearinandpolyethyleneforgreendefectsusingtaguchimethod AT muhamadnorhamidi injectionmoldingparameteroptimizationoftitaniumalloypowdermixwithpalmstearinandpolyethyleneforgreendefectsusingtaguchimethod AT ismailmh injectionmoldingparameteroptimizationoftitaniumalloypowdermixwithpalmstearinandpolyethyleneforgreendefectsusingtaguchimethod AT jamaludinkhairurrijal injectionmoldingparameteroptimizationoftitaniumalloypowdermixwithpalmstearinandpolyethyleneforgreendefectsusingtaguchimethod AT ahmads injectionmoldingparameteroptimizationoftitaniumalloypowdermixwithpalmstearinandpolyethyleneforgreendefectsusingtaguchimethod AT ibrahimmhi injectionmoldingparameteroptimizationoftitaniumalloypowdermixwithpalmstearinandpolyethyleneforgreendefectsusingtaguchimethod |