-
1
Development of properties database of carbon dioxide refrigerant
Published 2015“…At the beginning of the 20th century, refrigeration was well-established on an industrial scale but researchers still finding the best refrigerant to be used in widely application. …”
Article -
2
Performance comparison of automotive air conditioner using various refrigerants
Published 2015“…Working fluid of R134a is widely used as a refrigerant in automotive air conditioner. This refrigerant has a good performance on the automotive air conditioner. …”
Conference or Workshop Item -
3
New empirical correlations for sizing adiabatic capillary tubes in refrigeration systems
Published 2011“…Different from the previous studies, the empirical models have a large set of refrigerants and wide operating conditions. The developed correlation can be used as an effective tool for sizing adiabatic capillary tube with system models working with alternative refrigerants.…”
Conference or Workshop Item -
4
Empirical correlations for sizing adiabatic capillary tubes using conventional refrigerants and their alternatives
Published 2015“…This paper presents new empirical correlations developed by using conventional and alternative refrigerants for determining the size of adiabatic capillary tubes used in small vapor compression refrigeration systems. …”
Article -
5
Retrofitting R-22 split type air conditioning with hydrocarbon (HCR-22) refrigerant
Published 2013Conference or Workshop Item -
6
Energy analysis and compressor performance of refrigerator system using programmable logic control (PLC)
Published 2014“…This project present an experimental test results on energy consumption of a refrigerator compressor triggered by using thermostat and programmable logic control (PLC). …”
Article -
7
Effect of refrigerant on the exergy loss and performance in air conditioner using ejector as expansion device
Published 2015Conference or Workshop Item -
8
Empirical correlations for sizing adiabatic capillary tube using LPG as refrigerant in split-type air-conditioner
Published 2014“…The correlations can be used in small vapour compression refrigeration systems working with the HC refrigerant mixtures for practical design and optimization.…”
Article -
9
Taguchi method for development of mass flow rate correlation using hydrocarbon refrigerant mixture in capillary tube
Published 2014“…The capillary tube is an important control device used in small vapor compression refrigeration systems such as window air-conditioners, household refrigerators and freezers. …”
Get full text
Article -
10
Performance improvement using subcooling on freezer with R22 and R290 as refrigerant for various ambient temperatures
Published 2016“…Vapor compression refrigeration cycle (VCRC) is widely used in freezers. …”
Get full text
Article -
11
Investigation of various mixtures of hc290/hc600 refrigerants in adiabatic capillary tube used in split-type air-conditioner
Published 2013“…According to Montreal Protocol, HCFC22 (hydro chlorofluorocarbon), a commonly used refrigerant in domestic refrigeration and air-conditioner, must be phased out owing to its environmental problem. …”
Conference or Workshop Item -
12
Achieving a better energy-efficient automotive air-conditioning system: a review of potential technologies and strategies for vapor compression refrigeration cycle
Published 2015“…This article presents a review of potential technologies and strategies to develop an energy-efficient automotive air-conditioner based on the vapor-compression refrigeration cycle system. This paper is broadly divided into two sections. …”
Article -
13
Energy savings in air conditioning system using ejector: an overview
Published 2014“…There are two ejector configurations described in the present study: ejector refrigeration cycle and the ejector as an expansion device. …”
Article -
14
The application of gas ejector for road transport air conditioning system
Published 2012“…The analysis of this study is based on the ejector refrigeration system using natural refrigerant (isobutene). …”
Article -
15
Development and evaluation of an automotive air-conditioning test rig
Published 2016“…This paper presents the process of designing and the result from the automotive refrigeration system simulation that have been integrated into the test rig. …”
Get full text
Article -
16
Enhancing air conditioning performance using TiO2 nanoparticles in compressor lubricant
Published 2015“…Most air conditioners utilize vapor compression refrigeration cycle in their operation. In this cycle, the compressor is deployed to circulate the refrigerant from low to high pressures. …”
Conference or Workshop Item -
17
Energy savings on automotive air conditioner using liquid-suction heat exchanger subcooler
Published 2014“…The results show that the refrigeration capacity improvements and COP improvements up to 11.86% and 5.64%, respectively, for the subcooling of 1 K to 10 K and the condenser temperature of 40°C to 50°C.…”
Article -
18
Experimental study on the replacement of HFC-R134A by hydrocarbons mixture in automotive air conditioner
Published 2013“…Performance characteristics of the current automotive air conditioning system have been evaluated in this experimental study which will evaluate the power consumption, cabin temperature and coefficient of performance (COP) at various internal heat loads and engine speeds using hydro-chlorofluorocarbons refrigerant (HFC-R134a) and automotive hydrocarbon mixture refrigerant (AHCR) as the working fluid of the compressor. …”
Get full text
Article -
19
The effect of liquid suction heat exchanger sub-cooler on performance of a freezer using R404A as working fluid
Published 2015“…The decrease in temperature of the condenser outlet will cause a decrease in the quality refrigerant entering the evaporator. The lower the quality of the refrigerant entering the evaporator, the higher the cooling capacity produced by the evaporator. …”
Get full text
Article -
20
Experimental evaluation of automotive air-conditioning using HFC-134A and HC-134A
Published 2012“…In this study, these refrigerants will be tested using the experimental rig which simulated the actual cars as a cabin complete with a cooling system component of the actual car that is as the blower, evaporator, condenser, radiators, electric motor, which acts as a vehicle engine, and then the electric motor will operate the compressor using a belt and pulley system, as well as to the alternator will recharge the battery. …”
Book Section