-
1
Experimental study mechanical behaviour of epoxy resin composites filled with aluminium particles
Published 2019“…The compressive strength, Vickers hardness, and measuring the density were evaluated and compared. …”
Conference or Workshop Item -
2
Fe evaluation of thermal property of mould wall material for investment casting and the effect of layers on the hardness of the casting product
Published 2004“…The percentage of the silicon flakes for the cast product is decreased with the increasing of mold wall thickness. The Vickers Hardness also decreased with the increasing of mold wall thickness.…”
Get full text
Monograph -
3
Properties of pressurized lost foam casting of al-11si alloy
Published 2012“…The roughness and hardness of the casting was measured using Hobson (Surtronic 3+) and Vickers hardness testing machine respectively and reported in the average of ten readings. …”
Article -
4
The effect of aging treatment on the microstructure and thermodynamic parameters of CuA1Ni-Mn shape memory alloys (SMAs)
Published 2014“…Due to this, the values of Vickers hardness were observed to decrease at elevated temperatures and prolonged aging times. …”
Get full text
Thesis -
5
Effect of substrate bias on friction coefficient, adhesion strength and hardness of tin-coated tool steel
Published 2006“…A significant increase in micro-Vickers hardness was recorded, when substrate bias was reduced from -150 V to zero. …”
Article -
6
Influence of europium ion on structural, mechanical and luminescence behavior of tellurite nanoglass
Published 2013“…The glass density is determined by Precisa Densitometer and the hardness by the Vickers micro-hardness method. The density of tellurite nano-glass is found to be in the range of 5.2413 to 5.4933 g cm−3 while the Vickers microhardness varies from 2.77 to 2.93 GPa depending on the dopant concentration. …”
Conference or Workshop Item -
7
Physical, structural and elastic properties of silicate lithium niobate vanadium tellurite glass system
Published 2020“…FTIR and Raman spectra showed the incorporation of vanadium slightly modified the glass structure due to the introduction of a small amount of vanadium content in the glass system. The Vicker’s hardness values and ultrasonic elastic properties were found to increase with the increase of vanadium content and this showed the glass structure was more rigid and contained the fewest non-bridging oxygen. …”
Get full text
Thesis -
8
Effect of Cr2O3-TiO2 addition on the physical properties of zirconia toughened alumina
Published 2016“…The results were characterized by XRD, density, and also Vickers hardness. The ZTA-Cr2O3-TiO2 ceramic composite achieved the highest density of 4.1 g/cm3 and Vickers hardness of 1919 HV prior to the addition of 2.0 wt.% TiO2. …”
Conference or Workshop Item -
9
Effect of heat treatment on microhardness of electroless Ni-YSZ cermet coating
Published 2022“…The microhardness measurements were carried out using a Vickers microhardness tester (Shimadzu) according to ISO 6507-4. …”
Article -
10
Synthesis crystallization kinetic and optical properties of europium doped tellurite nano-glass
Published 2012“…The density was found to be in the range of 5.234 to 5.334 g cm-3 while the Vickers microhardness was found to vary from 2.59 to 2.84 GPa depending on the dopant concentration. …”
Get full text
Thesis -
11
Effect of zinc addition on the properties of magnesium alloys
Published 2012“…Optical microscopy, scanning Electron Microscope (SEM), tensile and Vickers hardness testing were used for the characterization and evaluation of the microstructure and mechanical properties of the alloys. …”
Get full text
Thesis -
12
Physical properties of cutlet-clay ceramic
Published 2011“…The sample density has been determined using the Archimedes method while their hardness by the Vickers Hardness Test. Meanwhile, the thermal shrinkage has been measured at 900°C. …”
Book Section -
13
The formation of iron aluminides on aluminum surface by using a Q-switched Nd:YAG laser
Published 2014“…Microstructural characterization and mechanical properties of the modified surface were carried out via gas discharge spectrometer GDS, X-Ray diffraction (XRD), Scanning electron microscope (SEM), and Vickers Hardness tester. The results indicate that hardness at the interface of Fe-Al layer is increased. …”
Article -
14
The formation of iron aluminides on aluminum surface by using a Q-switched Nd:YAG laser
Published 2013“…Microstructural characterization and mechanical properties of the modified surface were carried out via gas discharge spectrometer GDS, X-Ray diffraction (XRD), Scanning electron microscope (SEM), and Vickers Hardness tester. The results indicate that hardness at the interface of Fe-Al layer is increased. …”
Conference or Workshop Item -
15
The development of friction welding systems
Published 1992“…The tensile and bending test verified that the weld has good strength and ductility. The micro-vickers hardness test showed that there is a gradual hardness distribution across the selection of weldment. …”
Thesis -
16
The effect of milling time on aluminum-silicon carbide composite
Published 2014“…The effect of weight percentage of silicon carbide on hardness of composites was investigated by using Vickers hardness Test. Hardness of the composites increased with increasing silicon carbide addition in it.…”
Get full text
Thesis -
17
Physical and electrical properties of cullet-paper ash-kaolin clay ceramic
Published 2016“…The ceramic density and hardness has been determined using Archimedes and Vickers hardness method respectively. The dielectric constant and dielectric loss has been determined using impedance analyzer. …”
Conference or Workshop Item -
18
Deposition and characterization of TiN-coated steels at various N 2 gas flow rates with constant etching by using capvd technique
Published 2007“…Minimum value of surface roughness recorded at 200 sccm was measured via both surface roughness tester and atomic force microscopy (AFM). Micro-Vickers hardness of TiN-coated tool showed about 564% times increase in hardness than the uncoated one. …”
Article -
19
Physical properties of cullet-clay glass ceramic containing titanium nitride
Published 2022“…Meanwhile, the physical properties such as density have been determined using the Archimedes Principle and their mechanical characteristic such as Vickers hardness and Young's Modulus has been determined in a usual manner. …”
Conference or Workshop Item -
20
Physical properties of cullet-clay glass ceramic containing titanium nitride
Published 2022“…Meanwhile, the physical properties such as density have been determined using the Archimedes Principle and their mechanical characteristic such as Vickers hardness and Young's Modulus has been determined in a usual manner. …”
Article