-
1
Effect of bio-degradable lubricating in the lubricant system of ICE engine
Published 2020“…The review paper focuses on the use of biodegradable lubricant as lubricant system. The best choice for formulating environmentally friendly lubricants are synthetic and biodegradable lubricant. …”
Get full text
Book Section -
2
Orthogonal cutting performance of vegetable-based lubricants via minimum quantity lubrication technique on AISI 316L
Published 2023“…The MQL lubricants used are a bio-lubricant: Crude Tamanu Oil (CTO), Crude Jatropha Oil (CJO), Synthetic Ester (SE) and Refined Bleached and Deodorized Palm Olein (RBDPO). …”
Get full text
Conference or Workshop Item -
3
Orthogonal cutting performance of vegetable-based lubricants via minimum quantity lubrication technique on AISI 316L
Published 2024“…The MQL lubricants used are a bio-lubricant: Crude Tamanu Oil (CTO), Crude Jatropha Oil (CJO), Synthetic Ester (SE) and Refined Bleached and Deodorized Palm Olein (RBDPO). …”
Get full text
Conference or Workshop Item -
4
Design a CVT lubricant test device
Published 2006“…One of the factors that believe cause this belt slip is because of unstable in oil lubricant behaviour especially due to operate in high temperature and pressure. …”
Get full text
Thesis -
5
Design a CVT lubricant test device
Published 2006“…One of the factors that believe cause this belt slip is because of unstable in oil lubricant behaviour especially due to operate in high temperature and pressure. …”
Get full text
Thesis -
6
Tribological evaluation of solid lubricant enriched in modified Jatropha-Based Oil as Minimum Quantity Lubrication (MQL) oil for composite material
Published 2021“…Mineral-based oil is the most widely used lubricant that provided high-quality lubrication properties. …”
Get full text
Book Section -
7
Modified Jatropha nano-lubricant as metalworking fluid for machining process
Published 2019“…However, the highly viscous Jatropha oil draws upon unsatisfactory lubrication performance in the machining process. Thus, in this study, the chemically modified Jatropha oils with and without the hBN nanoparticles additive were tested on an orthogonal cutting process as a metalworking fluid. …”
Get full text
Article -
8
Evaluation of mist flow characteristic and performance in Minimum Quantity Lubrication (MQL) machining
Published 2018“…Minimum Quantity Lubrication (MQL) is an alternative method to supply the cutting fluid in the formation of mist. …”
Get full text
Article -
9
Tribological evaluations of modified RBD palm olein-based lubricants in machining processes
Published 2018“…The aim of this study is to evaluate the tribological and machining performances of the modified refined, bleached and deodorized (RBD) palm olein-based lubricants (MRPOs) containing low number of additives during the tapping torque and orthogonal cutting processes. …”
Get full text
Article -
10
Condition monitoring of variable speed worm gearbox lubricated with contaminated gear oil
Published 2013“…This research focuses on the condition monitoring of worm gearbox lubricated with contaminated gear oil. The main objectives are to characterize vibration behavior of worm gear as function contaminated lubricant viscosity. …”
Get full text
Get full text
Thesis -
11
Study on the application of ionic liquids in bio-based lubricant for a sustainable machining process
Published 2018“…Many factors tend to influence the increased demand in recent years, including stateof- the-art of effective and environmentally friendly metalworking fluids (MWFs). Bio-based lubricants from vegetable oils are highly biodegradable, non-toxic, pose good lubricating properties and low production costs. …”
Get full text
Get full text
Get full text
Thesis -
12
Design of pulse jet coolant delivery system for minimal quantity lubricant (IP MQL) operation
Published 2012“…Minimum quantity lubrication (MQL) machining is one of the promising solutions to the requirement for reducing cutting fluid consumption. …”
Get full text
Get full text
Get full text
Thesis -
13
A review on ionic liquids as sustainable lubricants in manufacturing and engineering: recent research, performance, and applications
Published 2017“…Many factors tend to influence the increased demand in recent years, including state-of-the-art of effective and environmentally benign lubricants. More importantly, managing volatile demand specifically in the development of lubricant efficiently can be a huge significant to the rapid technological improvements in various engineering and manufacturing industries. …”
Get full text
Article -
14
A study of the effect of palm oil as MQL lubricant on high speed drilling of titanium alloys
Published 2011“…The main objective was to study the potency of MQL palm oil (MQLPO) as a lubricant in the high speed drilling of Ti–6Al–4V. …”
Get full text
Article -
15
Tribological analyses of modified jatropha oil with hBN and graphene nanoparticles as an alternative lubricant for machining process
Published 2020“…The increase of health and environmental consciousness has motivated the effort of technology improvement on lubrication by finding and exploring another potential alternative to replace mineral-based metalworking fluids. …”
Get full text
Article -
16
Effect of Surface Roughness of Pistia Leaves Inspired Surfaces on Oil Contact Angle and Coefficient of Friction under Lubricated Condition
Published 2024“…The different nanocomposite of Pistia leaves inspired surface were found to affect for both parameters CA and COF under lubricated condition.…”
Get full text
Article -
17
Performance of modified jatropha oil in combination with hexagonal boron nitride particles as a bio-based lubricant for green machining
Published 2018“…This study evaluates the machining performance of newly developed modified jatropha oils (MJO1, MJO3 and MJO5), both with and without hexagonal boron nitride (hBN) particles (ranging between 0.05 and 0.5 wt%) during turning of AISI 1045 using minimum quantity lubrication (MQL). The experimental results indicated that, viscosity improved with the increase in MJOs molar ratio and hBN concentration. …”
Get full text
Article -
18
Numerical analysis of tribological characteristics for textured piston ring-liners in mixed lubrication with a non-circular cylinder bore
Published 2022“…The function of the piston rings is to control the lubricant and prevent leakage. The interface of the cylinder bore with the piston rings will cause a tribology behavior. …”
Get full text
Article -
19
Physical Properties of New Formulation of Hybrid Nanofluid-based Minimum Quantity Lubrication (MQL) from Modified Jatropha Oil as Metalworking Fluid
Published 2023“…Finally, the inclusion of additives aids MJO in improving its qualities by 31.1% reduction in acid value and MJOhw demonstrates outstanding lubricating properties across all samples.…”
Get full text
Article -
20
Physical Properties of New Formulation of Hybrid Nanofluid-based Minimum Quantity Lubrication (MQL) from Modified Jatropha Oil as Metalworking Fluid
Published 2023“…Finally, the inclusion of additives aids MJO in improving its qualities by 31.1% reduction in acid value and MJOhw demonstrates outstanding lubricating properties across all samples.…”
Get full text
Article