-
4221
Molecular degradation mechanism of segmented polyurethane and life prediction through accelerated aging test
Published 2023-07-01“…Finally, the lifespan was considered when the tensile strength was 70% of the initial state by using the ASTM D2000 standard. Thus, the lifespan of PU at 25 °C was calculated to be 12.2 years.…”
Get full text
Article -
4222
Effect of Nitrogen Ion Implantation on the Cavitation Erosion Resistance and Cobalt-Based Solid Solution Phase Transformations of HIPed Stellite 6
Published 2021-04-01“…CE tests were conducted according to ASTM G32 with stationary specimen method. Erosion rate curves and mean depth of erosion confirm that the nitrogen-implanted HIPed Stellite 6 two times exceeds the resistance to CE than unimplanted stellite, and has almost ten times higher CE reference than stainless steel. …”
Get full text
Article -
4223
Effect of Fuel Preheating on Engine Characteristics of Waste Animal Fat-Oil Biodiesel in Compression Ignition Engine
Published 2022-09-01“…Upon evaluating its fuel characteristics as per ASTM D6751 standards, a rise in preheating temperature by 1 °C reduced the density and kinematic viscosity of WAF-O biodiesel by 0.383 kg/m<sup>3</sup> and 0.025 mm<sup>2</sup>/s, respectively, and was explained by the weakening of intermolecular forces between its fatty acid ester molecules. …”
Get full text
Article -
4224
Caracterización física y mecánica de Pinus Taeda origen Marion en plantaciones de diferentes edades y determinación de usos potenciales, Misiones, Argentina
Published 2014-12-01“…Los ensayos físicos y mecánicos se determinaron según lo establecen las normas técnicas IRAM (Instituto Argentino de Racionalización de Materiales), ASTM (American Society for Testing and Materials) y DIN (Deutsche Industrie Norm). …”
Get full text
Article -
4225
Experimental study on the eco-friendly plastic-sand paver blocks by utilising plastic waste and basalt fibers
Published 2023-06-01“…In addition to this, basalt fibers which is a green industrial material is also added in the production of eco-friendly plastic sand paver blocks to satisfy the standard of ASTM C902-15 of 20 N/mm2 for the light traffic. In order to make the paver blocks, the LDPE waste plastic was melted outside in the open air and then combined with sand. …”
Get full text
Article -
4226
Experimental investigation and comparative environmental impact analysis of conventional and naturally occurring kinetic hydrate inhibitors in offshore environments using toxicity...
Published 2024-03-01“…Similarly, a proton-enabled nuclear magnetic resonance (1HNMR) technique was used to measure the partitioning characteristics of the inhibitors in an immiscible mixture of octanol and water (Kow) by 1HNMR spectroscopy using a benchtop low-field NMR spectrometer. OSPAR Commission and ASTM standard protocols were used for the laboratory investigation of the static sediment toxicity tests. …”
Get full text
Article -
4227
Electrochemical Noise Measurements of Advanced High-Strength Steels in Different Solutions
Published 2020-09-01“…In this work, the corrosion behavior of four AHSS steels with dual-phase [ferrite-martensite (DP) and ferrite-bainite (FB)] steels were studied by means of electrochemical noise (EN) measurements according to the ASTM G199-09 standard in NaCl, CaCl<sub>2</sub> and MgCl<sub>2</sub> aqueous solutions at room temperature. …”
Get full text
Article -
4228
Modelling and analysis of jute fiber reinforced epoxy composite in the development of wind blade for low intensity winds
Published 2024-01-01“…This study proposes the evaluation of the use of jute fiber (Corchorus capsularis) reinforced epoxy composite in the construction of S1210 airfoil profile, of a small-scale wind turbine for low wind speed regions, considering the structural parameters, developed incorporating the Classical Laminate Theory (CLT) and Extended Bredt-Batho Shear Flow Theory (EBSFT).In order to raise the elastic properties and enable the use of the failure criteria, the composite blades were characterized according to ASTM standards. The mechanical properties surveyed, together with the elastic parameters of the cross section, torsional stiffness, axial stiffness, GJ 1873.6 N m2, EI 9.47 × 104 N m2, and flexural rigidity, Ely 4.97 × 104 N m2, Elz 1.45 × 106 N m2, respectively, demonstrated the feasibility of using the jute fiber reinforced epoxy composite in the blade construction, evaluated according to the maximum tension failure criterion.…”
Get full text
Article -
4229
A Comparative Study on X-ray Shielding and Mechanical Properties of Natural Rubber Latex Nanocomposites Containing Bi<sub>2</sub>O<sub>3</sub> or BaSO<sub>4</sub>: Experimental and...
Published 2022-09-01“…In addition, the modified procedures introduced in this work enabled the developed nanocomposites to acquire sufficient mechanical and X-ray shielding properties for potential use as medical X-ray protective gloves, with the recommended content of Bi<sub>2</sub>O<sub>3</sub> and BaSO<sub>4</sub> being in the range of 95–140 phr and 105–120 phr, respectively (in accordance with the requirements outlined in ASTM D3578-19 and the value of Pb<sub>eq</sub> being greater than 0.02 mmPb). …”
Get full text
Article -
4230
APLICACIÓN DE UN REVESTIMIENTO PERIFÉRICO A ELECTRODOS AWS E FeCr-A8 PARA MEJORAR LA RESISTENCIA AL DESGASTE ABRASIVO
Published 2023-10-01“…Con el empleo del ensayo propuesto por la norma ASTM G65, (2017) se determinó la resistencia al desgaste abrasivo. …”
Get full text
Article -
4231
Physical, Mechanical and Durability Properties of Ecofriendly Ternary Concrete Made with Sugar Cane Bagasse Ash and Silica Fume
Published 2021-08-01“…All tests were carried out according to the ASTM and ONNCCE standards. The obtained results show that the physical properties of ETC concretes are very similar to those of conventional concrete, complying with the corresponding regulations. …”
Get full text
Article -
4232
Assessment of radioactivity in particulate matter and soil from selected mining towns of Erongo region, Namibia
Published 2023-07-01“…May 2017 to October 2017 using open bucket sampler procedure according to the American Society for Testing and Materials Standard Method (ASTM D1739) while some soil samples were collected using a soil auger. …”
Get full text
Article -
4233
In Vitro Biocompatibility Evaluation of a New Co-Cr-B Alloy with Potential Biomedical Application
Published 2021-08-01“…The addition of Boron to the ASTM F75 Co-Cr base alloy improves the biocompatible characteristics. …”
Get full text
Article -
4234
LC-QTOF-MS/MS Based Molecular Networking Approach for the Isolation of α-Glucosidase Inhibitors and Virucidal Agents from <i>Coccinia grandis</i> (L.) Voigt
Published 2021-12-01“…Moreover, they also displayed virucidal activity against influenza A virus H1N1, as revealed by the ASTM E1053-20 method.…”
Get full text
Article -
4235
Fabrication of titanium/titanium alloy components by powder injection moulding
Published 2014“…Therefore, in this research work, the fabrication of high strength Ti components by PIM is studied. ASTM B265 Grade 3 CP-Ti and Grade 5 Ti-6Al-4V are the targeted standard for this research work. …”
Get full text
Thesis -
4236
PEMANFAATAN BAHAN LIMBAH FLY ASH DAN BANTAK DALAM RANCANGAN KONSTRUKSI DINDING PENAHAN TANAH
Published 2011“…The mix design process result using fly ash variation of 0%, 20%, 40%, 60% and 80%, will be picked one based on the SNI and ASTM and the suitable fly ash variation will be the concrete block model retaining wall structure (gabion construction). …”
Thesis -
4237
PENGEMBANGAN ALUMINUM MATRIX COMPOSITE DENGAN MENGGUNAKAN PENGUAT SERBUK HASIL SINTESIS LIMBAH ABU TERBANG BATUBARA YANG DIPROSES DENGAN REAKSI CARBOTHERMAL REDUCTION
Published 2011“…Flexural properties was tested by four point flexural test based on ASTM C1161 standard. Hardness of MMC product was tested by brinell hardness test. …”
Thesis -
4238
Springback Pada Pembentukan Plat Baja Dengan Air Vee Bending
Published 2013“…Set up yang dilakukan mengikuti standar ASTM E 190 (metrik) dengan radius penumpu 20 mm dan radius clereance 1,6 mm. …”
Get full text
Conference or Workshop Item -
4239
Performance of Kenaf geotextile in improving bearing capacity of soft soil
Published 2023Get full text
Thesis -
4240
Performance of stone mastic asphalt mixture reinforced with newly developed interlocking chained plasti-beads
Published 2014“…SMA beam specimens were prepared with the above CPB sizes and proportions and tested to simulated loading and temperature conditions in accordance with ASTM and AASHTO Standards. Laboratory repeated flexural fatigue bending beam tests were conducted at five different strain levels (350 to 650μm) represents low, medium, and high traffic loading to evaluate the incorporation of CPB in SMA to assess mixture fatigue cracking performance. …”
Get full text
Thesis