-
1
Optimum Performance Enhancing Strategies of the Gas Turbine Based on The Effective Temperatures
Published 2016Get full text
Conference or Workshop Item -
2
-
3
Adsorption of phenol by activated carbon produced from decanter cake
Published 2009“…For the preparation of activated carbon, the suitable ratio of zinc chloride to the decanter cakes is 3:5 and the effective temperature of pyrolysis are 700°C and 900°C. For the pH effect, the removal is increased as the pH increased from 2 to 6 and starts to decrease at pH of 8 until 12. …”
Get full text
Undergraduates Project Papers -
4
The Potential Of Hybrid Turbine Ventilator To Improve Indoor Climatic Conditions In Hot-Humid Environment
Published 2010“…However, although all the HTV application strategies succeeded to reduce the Operative Temperature (OT) and Standard Effective Temperature (SET*) level compared to the existing condition, the overall results revealed that it is still not able to ensure occupants’ thermal comfort level at most of the time, when the OT achieved were above the upper comfort limits of 30.0°C for about 21% to 45% during the study period. …”
Get full text
Thesis -
5
Effect of solvent : solid ratio, solvent, temperature, time and method on extraction on total phenolic compound from propolis (Trigona Thoracica)
Published 2016“…Next, maceration method with specific solvent and ratio was conducted at 25°C and 50°C to identify the most effective temperature. The ultrasound extraction was conducted with duty cycle of 10% and 20% to identify the most effective duty cycle. …”
Get full text
Undergraduates Project Papers -
6
Liquid immersion cooling with enhanced Al2O3 nanofluid for large-format prismatic battery pack: Numerical and statistical investigation
Published 2025“…The widespread adoption of lithium-ion batteries (LIBs) owes much to the surging demand for electric vehicles, driven by their advantageous traits such as compact size, low resistance, high power density, and minimal self-discharge rates. Effective temperature control is paramount to guarantee the reliability of LIBs, especially for high-voltage prismatic battery packs, which are susceptible to thermal runaway incidents due to the large amount of heat production. …”
Get full text
Article -
7
Spatial Temporal Analysis of Urban Heat Hazard on Education Area (University of Indonesia
Published 2017“…The objective of this study is to examine UHS as an Urban Heat Hazard (UHH) based on Universal Temperature Climate Index (UTCI) and Effective Temperature Index (ETI) in University of Indonesia. …”
Article -
8
Functionally Graded Niti Shape Memory Alloys By Ageing And Partial Annealing
Published 2018“…The gradient temperature profile was locally created by CO2 laser along its length. The effective temperature range for gradient profile for functionally graded cold-worked Ti-50.9at%Ni was determined at 400℃ - 525℃ at different duration. …”
Get full text
Thesis -
9
Oil film behaviour in hydrodynamic lubrication of journal bearing / Mohamad Ali Ahmad
Published 2014“…It was observed that viscosity in operating journal bearing differ from the values obtained by effective temperatures.…”
Get full text
Thesis -
10
Oil film behaviour in hydrodynamic lubrication of journal bearing / Mohamad Ali Ahmad
Published 2015“…Measurement of temperature profile in hydrodynamic lubrication journal bearing has been investigated for different conditions later compared to predicted values from effective temperatures. In this study effective temperatures were calculated by two different methods using (1) Raimondi and Boyd charts and (2) inlet and outlet temperature values. …”
Get full text
Book Section -
11
Energy performance of optimally inclined free standing photovoltaic system
Published 2018“…Output variations due to angle of incidence, spectral effects, temperature and low irradiance is also discussed. …”
Get full text
Conference or Workshop Item -
12
Elucidation of Sonochemical Reaction Kinetics of Biodiesel Production from Jatropha Oil
Published 2012“…These studies have been performed based on 2 effects, temperature and oil to methanol molar ratio with fixed parameter of 1% w/w NaOH and 20 kHz of frequency for optimization and lastly with time which is used for kinetic study. …”
Get full text
Undergraduates Project Papers -
13
Evaluation of the performance of wax inhibitors on wax deposition
Published 2014“…Aside from that, the study on the rheology behaviour was carried out to validate the effects temperature and shear on the viscosity of the untreated crude oil. 10 mL volume of the wax inhibitor was injected into the cold finger equipment operating at 200 rpm, cold finger temperature at 10 ˚C, and water bath temperature surrounding the vessel at 50 ˚C. …”
Get full text
Undergraduates Project Papers -
14
Biodiesel production from Jatropha curcas via two-steps catalyzed process
Published 2010“…These studies have been performed based on 3 effect, temperature, catalyst concentration and time. As a result, the best condition that has been determined for maximum biodiesel production were 1.5% catalyst concentration of potassium hydroxides based on weight of jatropha curcas oil that were used methanol to jatropha curcas oil of 6:1 and, process were done at temperature 600C and the time is about 60 minutes. …”
Get full text
Undergraduates Project Papers -
15
Biodiesel production from jatropha curcas via two-steps catalyzed process
Published 2010“…These studies have been performed based on 3 effect, temperature, catalyst concentration and time. As a result, the best condition that has been determined for maximum biodiesel production were 1.5% catalyst concentration of potassium hydroxides based on weight of jatropha curcas oil that were used methanol to jatropha curcas oil of 6:1 and, process were done at temperature 600C and the time is about 60 minutes. …”
Get full text
Undergraduates Project Papers -
16
Preparation and characterization of Mgl2-Mg3 (PO₄)₂ AI2O3 electrolyte for magnesium battery / Azlini Ab.Aziz
Published 2014“…The increase in ionic conductivity is due to ion dissociation and decrease of value ionic conductivity is due to blocking effect. Temperature dependence showed the activation energy is lowered for the highest conducting sample. …”
Get full text
Thesis