-
141
Evaluation techniques and improvements of adhesion strength for tin coating in tool applications: A review
Published 2015“…This paper reviews the microstructures and adhesion strength of titanium nitride (TiN) coating produced using two different processing methods: chemical vapor deposition and physical vapor deposition. …”
Article -
142
Study on mechanical and microgeometric characteristics of ion-plasma deposited TiN coating on 40Cr steel substrate
Published 2015-12-01“…The ion-plasma sprayed titanium nitride (TiN) coating on the prepared 40Cr steel substrate is investigated. …”
Get full text
Article -
143
Analysis of the Surface Layer and Feed Force after Milling Polymer Composites with Coated and Uncoated Tools
Published 2023-08-01“…First, feed force values were determined in the milling process conducted using tools with polycrystalline diamond inserts, with titanium nitride-coated cemented carbide inserts and with uncoated ground cemented carbide inserts. …”
Get full text
Article -
144
A compact kinetic inductance travelling wave parametric amplifier with continuous periodic loading structure
Published 2022“…We present a kinetic inductance TWPA consisting of a patterned titanium nitride film on a sapphire substrate, which comprises a coplanar waveguide (CPW) with a continuous, smoothed periodic loading (PL) structure that modulates the characteristic impedance of the CPW in a double sinusoidal fashion. …”
Conference item -
145
Synthesis of TiN thin films from titanium imido complexes
Published 2003“…Most of the precursors formed titanium nitride films, however, bulkier imido complexes and those with chelating ligands tended to produce thin films with significant oxygen and carbon contamination, suggesting incomplete decomposition and post reaction oxidation. …”
Journal article -
146
Prediction of TiN coating adhesion strength on aerospace AL7075-T6 alloy using fuzzy rule based system
Published 2012“…In this research work, predicting of titanium nitride (TiN) coating adhesion on AL7075-T6 is presented. …”
Article -
147
Optimizing the PVD TiN thin film coating as parameters on aerospace AL7075-T6 alloy for higher coating hardness and adhesion with better tribological properties of the coating surf...
Published 2013“…An optimization study on the parameters of titanium nitride coating on aerospace Al7075-T6 alloy, using magnetron sputtering technique is presented. …”
Article -
148
Tool and formability multi-response optimization for ultimate strength and ductility of AA8011 during axial compression
Published 2022-10-01“…Based on the results obtained, the titanium nitride coating in the tool enhanced the surface roughness and increased the maximum formability. …”
Get full text
Article -
149
Performance Improvement of Total Ionization Dose Radiation Sensor Devices Using Fluorine-Treated MOHOS
Published 2016-03-01“…Fluorine-treated titanium nitride–silicon oxide–hafnium oxide–silicon oxide–silicon devices (hereafter F-MOHOS) are candidates for total ionization dose (TID) radiation sensor applications. …”
Get full text
Article -
150
Methods of data analysis for the ball cratering test on TiN and DLC coated steel
Published 2016-02-01“…Titanium nitride (TiN) coatings are widely used in machining because of its mechanical characteristics which modify the surface of the substrate increasing the capacity of load support and reduction of friction, while a coating as diamond-like carbon (DLC), which also has interesting mechanical properties, needs better attention. …”
Get full text
Article -
151
In‐Plane AlN‐based Actuator: Toward a New Generation of Piezoelectric MEMS
Published 2023-08-01“…Lateral motion of the actuator is enabled when a voltage is applied between the top and bottom electrodes of the device, which are highly doped Si and titanium nitride thin film. The motion of the actuator is captured using scanning electron microscope.…”
Get full text
Article -
152
The influence of drill point geometry on tool life
Published 2018-01-01“…Sometimes, due to an ecological need for dry technology without any lubricant, the use of drill bits with coatings is required, typically titanium nitride (TiN), titanium carbon nitride (TiCN) or titanium aluminium nitride (TiAlN). …”
Get full text
Article -
153
An approach to predict the isobaric specific heat capacity of nitrides/ethylene glycol-based nanofluids using support vector regression
Published 2020“…The nanoparticles considered are aluminium nitride (AlN), silicon nitride (Si3N4) and titanium nitride (TiN). The proposed model was built using simple and easy-to-obtain inputs such as the size of the nanoparticles (20, 30, 50, and 80 nm), the molar mass of the nanoparticles, mass fraction of nanoparticles (0.01 - 0.1) and the temperature (288.15 K, 298.15 K, and 308.15 K). …”
Get full text
Article -
154
Adhesion strength of tin coatings at various ion etching deposited on tool steels using cathodic ARC PVD technique
Published 2009“…Titanium nitride (TiN) widely used as hard coating material was coated on tool steels, namely on high-speed steel (HSS) D2 tool steel by physical vapor deposition method. …”
Article -
155
Growth defects and surface roughness in TiN-coated tool steel at various N2 gas flow rates using cathodic arc PVD technique
Published 2010“…In the present study, titanium nitride coatings on tool steel were deposited using cathodic arc physical vapour deposition technique. …”
Article -
156
Effect of substrate bias voltage on the microstructural and mechanical properties of tin-coated HSS synthesized by capvd technique
Published 2006“…Titanium nitride (TiN) films were deposited on high-speed steel (HSS) using cathodic arc physical vapor deposition (CAPVD) technique. …”
Article -
157
Relationship between the microstructure and the heat treatment and creep behavior of fe-33ni-19cr alloy
Published 2021“…The microstructure analysis showed that Fe–33Ni–19Cr alloy consists of the austenite phase matrix and a small number of precipitates such as titanium nitride and titanium carbides. Fe–33Ni–19Cr alloy shows an increase in steady-state creep rate with increased grain size from 94 to 381 μm, due to the grain boundary sliding mechanism. …”
Article -
158
The effect of non-metallic inclusion size and orientation on tensile properties of stainless steel (simulation and experiment)
Published 2020-04-01“…According to energy dispersive spectroscopy, it was determined that the appeared inclusions in the matrix of the titanium stabilized Fe-20Cr-9Ni steel is predominantly titanium nitride (TiN). As a result of the ESR process, excellent improvement in the tensile properties of the studied steel was observed. …”
Get full text
Article -
159
Influence of Physical Vapor Deposition on High-Cycle Fatigue Performance of Additively Manufactured Ti-6Al-7Nb Alloy
Published 2022-08-01“…For this reason, the effects of stress-relief heat treatment (SR; 600 °C/4 h) and three PVD coatings (titanium nitride (TiN), titanium carbonitride (TiCN), and silver-containing amorphous carbon (a-C:Ag)) on the mechanical properties, in terms of high-cycle fatigue, are identified. …”
Get full text
Article -
160
State-of-art of nitride microwave absorption materials
Published 2020-06-01“…In this paper, the research status of nitride microwave absorbing materials was discussed, and the research status of titanium nitride, iron nitride, manganese nitride, boron carbon nitride and alloy nitride was summarized in detail. …”
Get full text
Article