Physics informed neural network-based high-frequency modeling of induction motors by Zhao, Zhenyu, Fan, Fei, Sun, Quqin, Jie, Huamin, Shu, Zhou, Wang, Wensong, See, Kye Yak

“…This symmetry enables the proposed model to be applicable for both star- and delta-connected induction motors without having to recalculate the circuit element values when changing the motor connection from star to delta and vice versa. Motor physics knowledge, namely per-phase impedances, are used in the artificial neural network to obtain the values of the circuit elements. …”
Get full text

Solder joint testing and failure analysis by Kang, Eng Tat.

“…It was suggested that the fracture could have propagate from the ductile bulk solder to the brittle IMC interface or vice versa. Both the solder bonded joint specimens with and without pre-crack were tested at 2 other different strain rates of 0.001/s and 0.1/s. …”
Get full text

The investigation of impact induced particle resuspension by Kwa, Wilson Wei Sheng

“…For particle sizes, it was observed that larger particles have higher resuspension and deposition rates and vice versa. Due to the potential effects of harmful aerosols, it is essential to enhance the understanding of particle behaviour. …”
Get full text

Stalking in universities: responding effectively as an institution while prioritising the safety of victims by Short, Emma, Barnes, James

“…In 40% of those cases, the person who was accused of stalking and the person making the allegation studied at the same university (Vice, 2019). This chapter introduces and describes the crime of stalking and the migration of many behaviours to online platforms. …”

Laser metal deposition of low carbon 410L stainless steel and heat treatment by Zhai, Wengang, Wu, Naien, Zhou, Wei

“…The yield strength is 601.9 MPa for as-built condition and 930.6 MPa for heat-treated condition (1000 °C/10 min); the ultimate tensile strength (UTS) is 923.0 MPa for as-built condition and 1101.5 MPa for the heat-treated condition (1000 °C/10 min); the elongation is 17.7% for as-built condition and 15.1% for the heat-treated condition (1000 °C/10 min). …”
Get full text

Dose response effect of carbohydrate mouth rinse on 10 km running time trial by Muhammad Saufy Abdul Karim

“…Results: No significant difference (p = .441) in 10 km running time trial were observed between 6.4% CHO [mean 63.83 (SD 11) min] and 15% CHO [mean 65.91 (SD 13.36) min]. No significant difference were found in HR (p = .440) between 6.4% CHO [mean 162 (SD 7) beats/min] and 15% CHO [mean 158 (SD 13) beats/min]. …”
Get full text

Pengetahuan, Sikap dan Praktis (KAP) Komuniti Pekebun Kecil Koko (KPKK) berkaitan Malaysian Good Agricultural Practices (MyGAP) by Noviatin Syarifuddin, Jasmin Arif Shah, Asnarulkhadi Abu Samah, Nik Ahmad Sufian Burhan

“…Tahap amalan pertanian baik (APB) menunjukkan nilai min tertinggi oleh praktis (min 4.20). Diikuti, dengan tahap sikap (min 4.08) dan tahap pengetahuan (min 4.01) oleh KPKK. …”
Get full text

Mechanical properties of pultruded Kenaf fibre-reinforced vinyl ester composites by Abd Manab, Mohd Fairuz

“…The investigation of the effect of pulling speed on the mechanical properties of pultruded kenaf composites shows the optimal pulling speed for tensile strength and compressive strength is 0.3 m/min, tensile modulus 0.1 m/min, flexural strength 0.4, flexural modulus 0.2 m/min. …”
Get full text

Influence of machining parameters and tool geometry on tool wear during cobalt chromium-molybdenum micro drilling by Abdul Patar, Mohd. Affifudin, Suhaimi, Mohd. Azlan, Sharif, Safian, Amrifan S. Mohruni, Amrifan S. Mohruni, Hisam, Muhammad Juzaili, Shaharum, Mohd. Sallehuddin

“…The cutting speeds of 50 m/min, 65 m/min, and 80 m/min were varied. A total of 11 runs were performed, with each run consisting of drilling 30 holes. …”
Get full text

Analog smart I/O pads by Tan, Shyue Mei.

“…ESD is an increasingly significant problem in integrated circuit design as increasing pin counts and faster circuit speeds compound the need for more and better reliable ESD protection. …”
Get full text

Tribological properties of wax microcapsule modified polymers by Ang, Ping Lon

“…The tribology test uses the Pin-On-Disk wear test method and the default tribometer settings used in this project were set at 2000m sliding distance, 40cm/s linear speed and 3N linear load. …”
Get full text

Effect of emulsion temperature on physical properties of palm oil‐based margarine by Miskandar, M. S., Che Man, Y. B., Yusoff, M. S. A., Abdul Rahman, R.

“…The emulsion temperatures studied were 40, 45, and 50°C, with other parameters such as emulsion flow rates, tube cooler temperature, and pin rotor speed kept constant. The SFC developed during processing and storage at 28°C was measured to evaluate the quality of margarine. …”
Get full text

Back to the Basics of SARS-CoV-2 Biochemistry: Microvascular Occlusive Glycan Bindings Govern Its Morbidities and Inform Therapeutic Responses by Scheim, David E., Parry, Peter I., Rabbolini, David J., Aldous, Colleen, Yagisawa, Morimasa, Clancy, Robert, Borody, Thomas J., Hoy, Wendy E.

“…Consistent with the biochemistry of coronaviruses as well established over decades, SARS-CoV-2 makes its initial attachment to host cells through the binding of its spike protein (SP) to sialylated glycans (containing the monosaccharide sialic acid) on the cell surface. …”
Get full text

NMDA receptor activation enhances inhibitory GABAergic transmission onto hippocampal pyramidal neurons via presynaptic and postsynaptic mechanisms by Xue, Jiu Gang, Masuoka, Takayoshi, Gong, Xian Di, Chen, Ken-Shiung, Yanagawa, Yuchio, Law, Alex Sai Kit, Konishi, Shiro

“…Thus NMDARs at glutamatergic synapses on both CA1 pyramidal neurons and interneurons appear to exert feedback and feedforward inhibition for determining the spike timing of the hippocampal microcircuit.…”
Get full text
Get full text

Kinetics of papaya pectinesterase by Fayyaz, A., Asbi, B.A., Ghazali, H.M., Che Man, Y.B., Jinap, S.

“…The activity was linear up to 20 min with an enzyme concentration of up to 6.14 μg. …”
Get full text

Lying and rumination time as predictors of subclinical ketosis, metritis, and hypocalcaemia in dairy cows during the periparturient period: A systematic review and meta-analysis by Sadiq, Mohammed B., Zaini, Syamira-Syazuana, Shaik Mossadeq, Wan Mastura, Ramanoon, Siti Zubaidah, Syed-Hussain, Sharifah Salmah

“…Meanwhile, the MD of RT was significantly different in both periods (MD = −61.76 and −73.33 min/day, P < 0.05) for SCK and during the prepartum for metritis (MD = −23.37 min/day, P = 0.04). …”
Get full text

Fabrication of heat sinks by Selective Laser Melting for convective heat transfer applications by Wong, Kin Keong, Ho, Jin Yao, Leong, Kai Choong, Wong, Teck Neng

“…Three heat sinks comprising pin fins of circular, rectangular-rounded and aerofoil geometries were fabricated by SLM from aluminium alloy AlSi10Mg powder. …”
Get full text

A Novel MIMO antenna integrated with a solar panel and employing AI-equalization for 5G wireless communication networks by Hussein, Humam, Elmunim, Nouf Abd, Atasoy, Ferhat, Virdee, Bal Singh, Elwi, Taha A., Rashid, Nasr, Jayanthi, Renu Karthick Rajaguru, Alibakhshikenari, Mohammad, Limiti, Ernesto

“…We demonstrate that the directivity of this antenna array can be precisely electronically reconfigured using PIN diode switches. Additionally, we show the feasibility of integrating solar panels with the proposed MIMO antenna array. …”
Get full text
Get full text

Compressive strength of cemented sand by Chong, Ying Jie.

“…In this paper, the four main factors affecting the compressive strength of cemented sand will be investigated: water-cement ratio of 0.5, 0.6, 0.7; sand-cement ratio of 4.0, 5.0, 6.0; curing age at 3, 7 and 28 days; strain rate of 0.5mm/min, 1.0mm/min, and 2.0 mm/min. The other factors such as dry density, sample dimensions (height and diameter), curing conditions were kept constant. …”
Get full text

ProtAgents: Protein discovery via large language model multi-agent collaborations combining physics and machine learning by Ghafarollahi, Alireza, Buehler, Markus J.

“…Current methodologies for protein design often rely on AI-based models, such as surrogate models that address end-to-end problems by linking protein structure to material properties or vice versa. However, these models frequently focus on specific material objectives or structural properties, limiting their flexibility when incorporating out-of-domain knowledge into the design process or comprehensive data analysis is required. …”
Get full text