-
661
An investigation of defect formation and growth in epoxy resin using light scattering methods
Published 1989“…A common observation was a step type of behaviour that occurred on the release of stress, and also during stressing around a field value of 2.0 x 10[to the power of]6 kV m[to the power of]-1. The later has been attributed to failure occurring at the pin tip epoxy interface causing relaxation in the scattering volume. …”
Get full text
Thesis -
662
Multi-Mode Yagi Uda Patch Array Antenna With Non-Linear Inter-Parasitic Element Spacing
Published 2023“…Applying the inter-parasitic element spacing’s optimization and minimizing the switching circuitry using four RF PIN diodes on the parasitic elements have contributed to the gain achievement of more than 7 dBi.…”
Get full text
Article -
663
Prediction of sedimentation and bank erosion due to the construction of Kahang Dam
Published 2020“…This research used the Artificial Neural Network (ANN) and ANN with Autoregressive (AR) (NNETAR) in predicting suspended sediment concentration using sediment concentration, discharge and water level as inputs. Similarly, erosion pins were installed on four transects to monitor the riverbank for thirteen months. …”
Get full text
Get full text
Get full text
Thesis -
664
Low-loss paper-substrate triple-band-frequency reconfigurable microstrip antenna for sub-7 GHz applications
Published 2023“…In this paper, a low-cost resin-coated commercial-photo-paper substrate is used to design a printed reconfigurable multiband antenna. The two PIN diodes are used mainly to redistribute the surface current that provides reconfigurable properties to the proposed antenna. …”
Get full text
Get full text
Article -
665
Innovative UWB phase shifters using groove gap-waveguide technology inspired by metasurfaces for beamforming networks operating at 100 GHz
Published 2025“…The metasurface features a "bed-of-nails" structure, where metal pins are connected to a bottom layer and spaced <λ/4 from a top plate. …”
Get full text
Conference or Workshop Item -
666
Metamaterial based ultra-wideband antennas for portable wireless applications
Published 2017“…Various approaches have been reported to reduce the physical size of RF antennas including using high permittivity substrates, shorting pins, reactive components, and more recently, metamaterials (MTM) based on composite right-/left-handed transmission-lines (CRLH-TLs). …”
Get full text
Book Section -
667
Study on Palm Oil Kernel Shell Coarse Aggregate (PKSCA) as replacement material for coarse aggregate in concrete mix
Published 2018“…As we know the demand for material such as cement, fine and coarse aggregate is high. The construction industry is become bigger and bigger each day, but nowadays the price of material are not cheap like the old days. …”
Get full text
Book Section -
668
Utilization of Silica Fume and Sodium Hydroxide in Treated Crumb Rubber for Cement Mortar
Published 2024“…This research used a cement-aggregate mix ratio of 1:4 and a water-cement ratio of 1:2. Five different percentages of fine aggregate replacement (0, 3, 6, 9, and 12%) was selected. …”
Get full text
Article -
669
Measurement and modelling of operational amplifier power supply rejection
Published 1995“…Measured results for 741 and pin-compatible operational amplifiers are tabulated. …”
Get full text
Article -
670
-
671
CPW-fed printed UWB antenna with open-loop inverted triangular-shaped slot for WLAN band filtering
Published 2015“…The antenna possesses a notch band functionality to filter out interfering C-band signals like wireless local-area network (WLAN). The notch band frequency is determined by physical parameters defining the TSS that allows fine control of the notch's location. …”
Get full text
Article -
672
-
673
Prompting and RAG vs. student engagement and comprehension in educational technology
Published 2025“…Effective use of GenAI requires thoughtful implementation, including techniques like prompting and retrieval-augmented generation (RAG). …”
Get full text
Conference or Workshop Item -
674
Frequency reconfigurable substrate integrated waveguide (SIW) cavity F-shaped slot antenna
Published 2019“…Configurability is accomplished by embeddings PIN diode switches in the 'F' slot. The proposed antenna is equipped for exchanging between working band of 3.172 GHz to 3.606 GHz in four different narrow bands and it underpins the cognitive system for LTE2300, WiMAX and WLAN. …”
Get full text
Article -
675
A Review of Genetic Algorithm: Operations and Applications
Published 2024“…However, the inherent complexity and diversity of problems necessitate versatile approaches like GA. The problem statement underscores the need to explore the underlying operations and applications of GA to provide a nuanced understanding of their capabilities and limitations. …”
Get full text
Article -
676
Substrate integrated waveguide cavity backed frequency reconfigurable antenna for cognitive radio applies to internet of things applications
Published 2019“…Reconfiguration of frequency bands is achieved using PIN diodes. The antenna resonated at 2.624, 2.664, 2.720, 2.752, 4.304, 4.532, 4.556, 5.236, 5.304, 5.368, 5.332, and 5.392 GHz. …”
Get full text
Article -
677
3rd order coupled-resonator bandpass filter assisted by Groove Gap-Waveguide technology for 26-GHz radio link diplexer
Published 2025“…Its unit-cells consist of a rectangular metal-pin which is connected to a bottom metal plate and its other side is electromagnetically coupled to a top plate with an air-gap of approximately λ/4 that creates a bandgap, preventing unwanted electromagnetic-wave propagation. …”
Get full text
Conference or Workshop Item -
678
Remediation of contaminated marine sediment using bentonite, kaolin and sand as capping materials
Published 2019“…In this technique, sediments are capped by placing a layer of inert materials like sand, clean soil, or gravel or active materials like activated carbon, zeolite, or apatite over sediments in order to reduce the risk to the aquatic environment. …”
Get full text
Get full text
Get full text
Thesis -
679
-
680
Smart home control system design using internet of things based energy harvesting technology
Published 2024“…The objective of this research is to provide security for homeowners by facilitating fingerprints and PIN (Personal Identification Numbers) in entering the house, then in the event of a power outage, it activates the function of energy harvesting technology. …”
Get full text
Conference or Workshop Item