Kinetics of water disinfection with Moringa Oleifera seeds extract by Bichi, Mustafa Hassan, Agunwamba, Jonah Chukwumemeka, Muyibi, Suleyman Aremu

“…One mL of Moringa extract was added to 10mL of the cell cultures and incubated for 0, 30min, 60min, 90min, and 120min without agitation. …”
Get full text

Sensory-based colour sorting automated robotic cell by Ata, Atef A, Rafeek, Ahmad, Yusof, Hanani

“…The aim of this research work is to recognize colour by pin point detection and sorting of object specimens with respect to their colour attributes, which includes hue, saturation and luminance level. …”
Get full text

A comparative study on flank wear and work surface finish during high speed milling of cast iron with different carbide tools by Khan, Ahsan Ali, Aman Nor Rasid, Zuraida, Yusof, Izausmawati

“…Tool life sharply reduced for all the carbide tools while increasing cutting speed twice (from 500m/min to 1000m/min) during machining cast iron. Though the productivity would be double at the speed of 1000m/min than that at the speed of 500m/min, tool wear increases to a few times which indicates that the inserts used are not suitable for machining at a high speed like 1000m/min. …”
Get full text

Development and validation of analytical method by RP-HPLC for quantification of Alpha-Mangostin Encapsulated in PLGA microspheres by Elsaid Ali, Aimen Abdo, Muhammad, Taher, Helal Uddin, A.B.M., Mohamed, Farahidah

“…Method was developed using a silica-based deactivated C-18 column (4.6×100 mm, 3 μm) with a mobile phase of 70-80 % v/v acetonitrile (A) and 0.1% v/v orthophosphoric acid (B), with the following pre-determined timed-gradient program: 70% (A) isocratic for 6 min, 70-75% (A) in 1.2 min, 75-80% (A) in 0.4 min, 80% (A) isocratic for 2.4 min, 80-70% (A) in 0.4 min, finally 70% (A)isocratic for 5 min, with a flow rate of 1 mL/min, detected at 320 nm by a UV detector. …”
Get full text

Design and Implementation of Active Antennas for IoT-Based Healthcare Monitoring System by MUSA, UMAR, MOHD SHAH, SHAHARIL, A. MAJID, HUDA, MAHADI, ISMAIL AHMAD, A. RAHIM, MOHAMAD KAMAL, YAHYA, MUHAMMAD SANI, ZAINAL ABIDIN, ZUHAIRIAH

“…Two dual-band (2.4 GHz and 5.8 GHz) microstrip patch antennas, one with a PIN diode and one without, are fabricated using Rogers Duroid RO3003™ substrate. …”
Get full text

Design and Implementation of Active Antennas for IoT-Based Healthcare Monitoring System by MUSA, UMAR, MOHD SHAH, SHAHARIL, A. MAJID, HUDA, AHMAD MAHADI, ISMAIL, A. RAHIM, MOHAMAD KAMAL, YAHYA, MUHAMMAD SANI, ZAINAL ABIDIN, ZUHAIRIAH

“…Two dual-band (2.4 GHz and 5.8 GHz) microstrip patch antennas, one with a PIN diode and one without, are fabricated using Rogers Duroid RO3003™ substrate. …”
Get full text

Design and Implementation of Active Antennas for IoT-Based Healthcare Monitoring System by MUSA, UMAR, MOHD SHAH, SHAHARIL, A. MAJID, HUDA, MAHADI, ISMAIL AHMAD, A. RAHIM, MOHAMAD KAMAL, YAHYA, MUHAMMAD SANI, ZAINAL ABIDIN, ZUHAIRIAH

“…Two dual-band (2.4 GHz and 5.8 GHz) microstrip patch antennas, one with a PIN diode and one without, are fabricated using Rogers Duroid RO3003™ substrate. …”
Get full text

Effect of poly(ethylene glycol) on the injectability, setting behavior and mechanical properties of calcium phosphate bone cement by Hablee, Sufiamie, Sopyan, Iis, Mel, Maizirwan, Mohd. Salleh, Hamzah, Rahman, Mujibur

“…Simen tanpa PEG mempunyai masa pengerasan awal daripada 3 min kepada 122 min dan masa pengerasan akhir daripada 5 min kepada 277 min. …”
Get full text
Get full text
Get full text

Ajaran sesat, edisi kedua by Mohd. Amin, Wan Mohd. Azam

“…Bab pertama membincangkan isu-isu ajaran sesat secara umum di Malaysia dengan memberi keutamaan kepada kes the Unification Church di Korea Selatan dan persamaan isu tersebut dengan kes Ayah Pin di Terengganu. Dalam bab kedua, isu hubungan antara muzik dan dadah dengan ajaran sesat telah dibincangkan dengan menggunakan kes Black Metal dan gejala murtad sebagai kajian kes. …”
Get full text

Effects of time and temperature on process and crude palm oil quality with microwave irradiation sterilization by Sarah, Maya

Get full text

Foam replicated porous 316l stainless steel based on taguchi method for biomedical applications by Mat Noor, Fazimah

“…The optimised porosity of porous SS316L prepared by ball milling method was 85.44% and achieved using sintering time of 60 minutes, sintering temperature of 1200C, heating rate of 1C/min, SS316L composition of 60 wt% and cooling rate of 1C/min. …”
Get full text

Frequency reconfigurable substrate integrated waveguide (SIW) cavity F-shaped slot antenna by AL-Fadhali, Najib, A Majid, Huda, Omar, Rosli, Mokhtar, Mohd Hezri, Abo Mosali, Najmaddin

“…Configurability is accomplished by embeddings PIN diode switches in the 'F' slot. The proposed antenna is equipped for exchanging between working band of 3.172 GHz to 3.606 GHz in four different narrow bands and it underpins the cognitive system for LTE2300, WiMAX and WLAN. …”
Get full text

3rd order coupled-resonator bandpass filter assisted by Groove Gap-Waveguide technology for 26-GHz radio link diplexer by Alibakhshikenari, Mohammad, Parand, Peiman, Zidour, Ali, Virdee, Bal Singh, Longhi, Patrick, See, Chan Hwang, Limiti, Ernesto

“…Its unit-cells consist of a rectangular metal-pin which is connected to a bottom metal plate and its other side is electromagnetically coupled to a top plate with an air-gap of approximately λ/4 that creates a bandgap, preventing unwanted electromagnetic-wave propagation. …”
Get full text

Tribological (wear) properties of aluminum–silicon eutectic base alloy under dry sliding condition by Alias, Tuti Yasmin, Khalid, Asad A., Haque, Md. Mohafizul

“…Wear experiments on both samples were conducted with a pin-on-disk type wear testing apparatus. The test variables were the rotational speed, input weight, and time/sliding distance. …”
Get full text

Influence of single and multiple particle size variation on mechanical and wear behaviour of aluminium silicon carbide composites by Adebisi, Adetayo A., Maleque, Md. Abdul, Ali , Mohammad Yeakub, Bello, Kamilu Adeyemi

“…Standard impact and hardness test was conducted to ascertain the energy absorbed before fracture failure and resistance to plastic deformation of the composite. Pin-on-disc test was also investigated at room temperature under dry sliding wear condition. …”
Get full text

Optimization of activated carbon production from empty fruit bunch fibers in one-step steam pyrolysis for cadmium removal from aqueous solution by Al-Khatib, Ma'an Fahmi Rashid, Muyibi, Suleyman Aremu, Amode, Jeminat Omotayo

“…Physical activation comprised of carbonization for 30 min using nitrogen gas (N2), followed by activation with steam at different flow rates (2.0, 3.0, and 4.0 ml/min), temperatures (600, 750,and 900�C) and times (15, 30, and 45 min). …”
Get full text

Signature recognition using artificial neural network by Abushariah, Ahmad A. M., Gunawan, Teddy Surya, Khalifa, Othman Omran, Chebil, Jalel

“…It might be done by asking a secret question that the user will answer to get into that application, and it might be a password or a pin code, face, eye, fingerprint or signature. Automatic signature verification is an active field of research with many practical applications. …”
Get full text

Prediction of sedimentation and bank erosion due to the construction of Kahang Dam by Nda, Muhammad

“…This research used the Artificial Neural Network (ANN) and ANN with Autoregressive (AR) (NNETAR) in predicting suspended sediment concentration using sediment concentration, discharge and water level as inputs. Similarly, erosion pins were installed on four transects to monitor the riverbank for thirteen months. …”
Get full text
Get full text
Get full text

A study on abrasive water jet machining of aluminum with garnet abrasives by Khan, Ahsan Ali, Munajat, Noraziaty, Tajudin, Harnisah

“…The feed rate of the work should be kept within 40 rum min- I (at the jet pressure of 30 h i and the stand-off distance of3 mm). because a feed rate beyond 40 mm min-I results in sharp increase in taper angle. …”
Get full text

Adsorption behaviour of manganese (Mn2+) removal from aqueous solution using carbon nanotubes by Kabbashi, Nassereldeen Ahmed, Mirghani, Mohamed Elwathig Saeed, Y., Farhana I.

“…Different pHs are pH 6.0, pH 6.5, pH 7.0, pH 7.5 and pH 8.0, CNT dosages are 5mg, 6.25mg, 7.5mg, 8.75mg or 10mg, contact time are 10 min, 32.5 min, 55 min, 87.5 min and 120 min while the agitation speeds are 100rpm, 150rpm, 200rpm, 250rpm and 300rpm. …”
Get full text