Utilization of waste as a constituent ingredient for enhancing thermal performance of bricks – a review paper by Raut, Ashwin Narendra, Gomez, Christy Pathrose

“…From a research perspective, in the wake of the growing concerns for the environment, the use of waste material to develop bricks which can exhibit suitable characteristics attributed to the material composition has been on the rise. However, the extant literature on utilization of waste materials for brick mix design has neglected to provide detailed literature review on the influence of waste materials on the thermal performance of bricks. …”
Get full text

Analysing method for acoustic emission clustering system on reinforced concrete beam by Saiful Bahari, Nur Amira Afiza

“…The need for effective data analysis in the clustering system can be linked to three main objectives in this research; (1) to determine the type of failure on reinforced concrete beams through the AE system; (2) to identify and discriminate the AE data parameters via crack classification (tensile and shear movement); (3) to verify the crack classification of Rise Amplitude (RA) clustering by using the NI LabVIEW clustering algorithm. …”
Get full text
Get full text
Get full text

A simulation model of solid concrete beam containing Palm Oil Fuel Ash (POFA) and Expeneded Polystyrene (EPS) using finite element method by Rosli, Siti Nurhaliza, Osman, Mohamad Hairi, Mahyeddin, Mohd Eizzuddin

“…First Concrete beam construction has contributed to a rise in the emission of carbon dioxide (CO2) gas, which is the key cause of global warming. …”
Get full text

Bioprocess optimization for kefiran production by lactobacillus kefiranofaciens by Dailin, Daniel Joe

Get full text

Extraction and microencapsulation of polyphenol-rich antioxidant from Clinacanthus nutans for controlled release formulation by Abdul Karim, Norsuhada

Get full text

A Cryopreservatlon method of Sclzaphyllurn commune local strains by Mohd Kamal, Irnada Syuhaidah, Mohd Nor Rashid, Noraswati, Mel, Maizirwan

“…AU of the treatments were frozen in liquid nitrogen for 7 days followed by thawing (cooling) at 30°C for 30 min. The grains were inoculated onto PDA agar to observe the viability (rate of survival) of the seeds. …”
Get full text

Essential work of fracture and acoustic emission study on TPNR composites reinforced by Kenaf Fiber by Anuar, Hazleen

“…The strain rate was fixed at 2 mm/min. The specific work of fracture (we) and plastic work (bwp) showed the highest energy for TPNR that corresponds to its ductility and allows the application of the EWF approach. …”
Get full text

Powder mixed micro electro discharge milling of titanium alloy: Investigation of material removal rate by Ali, Mohammad Yeakub, Abdul Rahman, Nur Atiqah, Mohamad Aris, Erniyati

“…In this experimental investigation, maximum MRR of 7.3 µg/min was obtained for 24.75 g/l SiC powder concentration and 56.77 µJ discharge energy. …”
Get full text

Effects of polar cosolvents on cocoa butter extraction using supercritical carbon dioxide by Asep, E. K., Jinap, Selamat, Jahurul, Md. Haque Akanda, Sarker, Md. Zaidul Islam, Singh, H.

“…Cocoa butter was successfully extracted from cocoa liquor by supercritical carbondi oxide (SC-CO2) at 35 MPa, 60 oC and 2 mL/min with 5%, 15% and 25% cosolvents. The extraction yield of tryglicerides (TG) and fatty acid (FA) compositions were significantly influenced by the concentration of polar cosolvents. …”
Get full text

علم الصرف العربي المتقدّم لأغراض علمية (دراسة في الفعل وأبنيته وددلالته وأزمنته من خلال شواهد القرآن الكريم)... by Dollah, Nafi@Hanafi

“…To study about alsorf al-Arabi al-mutaqaddim li-aghradh ilmiyyah min khilal al-Quranul karim theoritically and practically…”
Get full text

Statistical analaysis for removal of Cadmium from aqueous solution at High pH by Kabbashi, Nassereldeen Ahmed, Daoud, Jamal Ibrahim, Mirghani, Mohamed Elwathig Saeed, Rosli, Nurhasni Falina

“…From the results obtained, the highest percentage removal of Cd using CNT is at pH7, 10 mg of CNTs dosage, contact time of 120 min and agitation speed of 150 rpm which gave 19.14% removal.…”
Get full text

Prediction of minimum chip thickness in tool based micro end milling by Ali, Mohammad Yeakub, Khan, Ahsan Ali, Mohamad Asharaf, Asfana Banu, Abdul Wahab, Adibah

“…The optimum value for the minimum chip thickness was 375 nm with cutting speed of 2275 rpm, feed rate of 2.6 mm/min, and depth of cut 0.6 μm using Ø 0.8 mm tool. …”
Get full text

BE-P32: fabrication of Nahar Seed Oil for biolubricant production by Mirghani, Mohamed Elwathig Saeed, Kabbashi, Nassereldeen Ahmed, Qudsieh, Isam Y., Ibrahim, Irmanisha

“…From the result obtained, the maximum viscosity of NSO biolubricant was achieved when the temperature was 150oC, 80 min in reaction time and 0.8% catalyst dosage. …”
Get full text

Kajian terhadap faktor-faktor mempengaruhi pencapaian pelajar dalam penilaian menengah rendah di Sabah by Salleh, Mohamad Johdi

“…Hasil dari penganalisisan data ini diterangkan dalam bentuk kekerapan, peratusan dan min. Dapatan kajian menunjukkan bahawa domain kendiri, guru, ibubapa, dan rakan banyak mempengaruhi strategi dan gaya pembelajaran pelajar yang mendorong kepada pencapaian PMR.…”
Get full text

Powder mixed micro electro discharge milling of titanium alloy: Investigation of material removal rate by Ali, Mohammad Yeakub, Abdul Rahman, Nur Atiqah, Mohamad Aris, Erniyati

“…In this experimental investigation, maximum MRR of 7.3 µg/min was obtained for 24.75 g/l SiC powder concentration and 56.77 µJ discharge energy. …”
Get full text

The economic impact of using negative rake angle in high speed hard turning by Al Hazza, Muataz Hazza Faizi, Adesta, Erry Yulian Triblas

“…The experiments were obtained with constant cutting depth (0.15 mm), constant feed rate (0.075 mm), constant cutting speed (250 m/min) and five different tool rake angles0o,-3, -6,-9 and -12). …”
Get full text

Experimental study of cutting parameter for drilling on fabric carbon/epoxy composite laminates by Abd Halim, Nor Farah Huda, , Afzeri, Aminanda, Yulfian

“…Variation of cutting parameter such as feed rate (50,100 and 150 mm/min) and speed(400,800,1200 rpm) were tested in this study. 6 different laminates orientation (0°/0°/0°/0°, 45°/45°/45°/45°, 0°/45°/0°/45°, 45°/0°/45°/0°, 0°/0°/45°/45° and 45°/45°/0°/0°) were tested in order to see which one is the best. …”
Get full text

The evaluation of kLa values for recombinant Escherichia coli fermentation producing β-Glucuronidase enzyme by Mel, Maizirwan, Abdul Karim, Mohamed Ismail, Mohd. Salleh, Hamzah

“…From the four experiments conducted, experimental nul mnnber two with agitation of 300 rpm, airflow rate of 2 vvrn and temperature 41°C generate the highest Optical Density (OD 660 nrn) of 2.313 for cell count and also having an equivalent k,a value of 0.0281 min-lor 1.686 h-1.This condition was fOlllld to be an effective point for upscaling in bigger bioreactor for E. coli fermentation to produce the enzyme.…”
Get full text

Single-route synthesis of magnetic biochar from sugarcane bagasse by microwave-assisted pyrolysis by Mohamed Noor, Noraini, Abdullah, Ezzat Chan, Othman, Raihan, Mujawar, Mubarak N.

“…The optimum conditions for producing high yield 69% magnetic biochar from sugarcane bagasse by microwave heating were 30 min of radiation time and an impregnation ratio (Fe2O3:biomass) of 0.45. …”
Get full text
Get full text

Effects of Multi-Walled Carbon Nanotubes (MWCNTS) on the mechanical and thermal properties of plasticized polylactic acid Nanocomposites by Othman, Maizatulnisa, Tan, Kok Hui, Hashim, Mohd Yusof, Khalid, Halissani, Ghazali, Ruzaidi, Zakaria, Nazarudin, Mat Tahir, Paridah, Hassan, Noor Azlina

“…A multi-walled carbon nanotube (MWCNT)/plasticized polylactic acid (PLA) composite was prepared using a two-roll mill set at 170C and 50 rev/min. The material was characterized using dynamic mechanical analyzer (DMA). …”
Get full text