A comparative study on flank wear and work surface finish during high speed milling of cast iron with different carbide tools by Khan, Ahsan Ali, Aman Nor Rasid, Zuraida, Yusof, Izausmawati

“…Tool life sharply reduced for all the carbide tools while increasing cutting speed twice (from 500m/min to 1000m/min) during machining cast iron. Though the productivity would be double at the speed of 1000m/min than that at the speed of 500m/min, tool wear increases to a few times which indicates that the inserts used are not suitable for machining at a high speed like 1000m/min. …”
Get full text

Development and validation of analytical method by RP-HPLC for quantification of Alpha-Mangostin Encapsulated in PLGA microspheres by Elsaid Ali, Aimen Abdo, Muhammad, Taher, Helal Uddin, A.B.M., Mohamed, Farahidah

“…Method was developed using a silica-based deactivated C-18 column (4.6×100 mm, 3 μm) with a mobile phase of 70-80 % v/v acetonitrile (A) and 0.1% v/v orthophosphoric acid (B), with the following pre-determined timed-gradient program: 70% (A) isocratic for 6 min, 70-75% (A) in 1.2 min, 75-80% (A) in 0.4 min, 80% (A) isocratic for 2.4 min, 80-70% (A) in 0.4 min, finally 70% (A)isocratic for 5 min, with a flow rate of 1 mL/min, detected at 320 nm by a UV detector. …”
Get full text

Effect of poly(ethylene glycol) on the injectability, setting behavior and mechanical properties of calcium phosphate bone cement by Hablee, Sufiamie, Sopyan, Iis, Mel, Maizirwan, Mohd. Salleh, Hamzah, Rahman, Mujibur

“…Simen tanpa PEG mempunyai masa pengerasan awal daripada 3 min kepada 122 min dan masa pengerasan akhir daripada 5 min kepada 277 min. …”
Get full text
Get full text
Get full text

Effects of time and temperature on process and crude palm oil quality with microwave irradiation sterilization by Sarah, Maya

Get full text

Simultaneous extraction and fractionation of pufa from tropical tuna (thunnus tongol) head using pressure swing technique of supercritical CO2 (SC-CO2) by Sarker, Md. Zaidul Islam

“…Tuna fishes are known as one of the main commodity of fisheries which is generally marketed as canned food or as loins/steaks. …”
Get full text

Performance properties optimization of triaxial ceramic-palm oil fuel ash by employing Taguchi design and flower pollination algorithm by Zainudin, Azlan

“…The excessive cost and time consumed is a main issue if high number of experiments need to be performed. …”
Get full text
Get full text
Get full text

Foam replicated porous 316l stainless steel based on taguchi method for biomedical applications by Mat Noor, Fazimah

“…The optimised porosity of porous SS316L prepared by ball milling method was 85.44% and achieved using sintering time of 60 minutes, sintering temperature of 1200C, heating rate of 1C/min, SS316L composition of 60 wt% and cooling rate of 1C/min. …”
Get full text

The effects of angiotensin-converting enzyme gene polymorphism on the progression of immunoglobulin A nephropathy in Malaysian patients by Draman, Che Rosle, Kong , NCT, Gafor, AH, Rahman, AFA, Zainuddin , S, Mustaffa, WMW, Radzi, AM, Shamsul , AS

“…It was −5.7 +/− 2.2 ml/min/1.73 square metres/year for the DD group and −4.8 +/− 2.0 ml/min/1.73 square metres/year for the non-DD group (p-value is equal to 0.5). …”
Get full text

Synthesis of fibrous silica supported noble metals catalysts for syngas production via partial oxidation of methane by Tan, Ji Siang

Get full text

Optimization of activated carbon production from empty fruit bunch fibers in one-step steam pyrolysis for cadmium removal from aqueous solution by Al-Khatib, Ma'an Fahmi Rashid, Muyibi, Suleyman Aremu, Amode, Jeminat Omotayo

“…Physical activation comprised of carbonization for 30 min using nitrogen gas (N2), followed by activation with steam at different flow rates (2.0, 3.0, and 4.0 ml/min), temperatures (600, 750,and 900�C) and times (15, 30, and 45 min). …”
Get full text

A new visual simulation tool for performance evaluation of MANET routing protocols by Sakib, Md. Sabbir Rahman, Saquib, Nazmus, Pathan, Al-Sakib Khan

Get full text

A study on abrasive water jet machining of aluminum with garnet abrasives by Khan, Ahsan Ali, Munajat, Noraziaty, Tajudin, Harnisah

“…The feed rate of the work should be kept within 40 rum min- I (at the jet pressure of 30 h i and the stand-off distance of3 mm). because a feed rate beyond 40 mm min-I results in sharp increase in taper angle. …”
Get full text

Effect of electrical parameters on performance of Cu-TiC mixed ceramic compact electrode in EDM process by Khan, Ahsan Ali, Ndaliman, Mohammed Baba, Mohammad , Yeakub Ali, Lawal, Sunday Albert, Sulong, Nurul Farhana, Mohamad, Ummu Atiqah Khairiyah

“…Tool electrode being the main component of the machine can be produced by a number of techniques. …”
Get full text
Get full text
Get full text

Progressive freeze concentrator prototype for preservation of phenolic content in grape juice by Safiei, Nor Zanariah

Get full text

Steel Slag and Limestone as a Rock Filter for Eliminating Phosphorus from Domestic Wastewater: A Pilot Study in a Warm Climate by Maarup, Syahrul Nizam, Hamdan, Rafidah, Othman, Norzila, Adel Al-Gheethi, Adel Al-Gheethi, Sadeq Alkhadher, Sadeq Alkhadher, M. M. Abd El-Hady, M. M. Abd El-Hady, S. El-Sayed Saeed, S. El-Sayed Saeed

“…Phosphorus input with excessive use of fertilizers and manure as one of the main sources of nutrient pollution has increased recently in the wastewater as result of intensive farming and industrialized and densely populated areas. …”
Get full text

Steel Slag and Limestone as a Rock Filter for Eliminating Phosphorus from Domestic Wastewater: A Pilot Study in a Warm Climate by Maarup, Syahrul Nizam, Hamdan, Rafidah, Othman, Norzila, Adel Al-Gheethi, Adel Al-Gheethi, Sadeq Alkhadher, Sadeq Alkhadher, M. M. Abd El-Hady, M. M. Abd El-Hady, S. El-Sayed Saeed, S. El-Sayed Saeed

“…Phosphorus input with excessive use of fertilizers and manure as one of the main sources of nutrient pollution has increased recently in the wastewater as result of intensive farming and industrialized and densely populated areas. …”
Get full text

Scaling up of the processes for the production of optimized eurycoma longifolia extracts using dimensional analysis by Mohmad @ Harun, Noor Hafiza

Get full text

Adsorption behaviour of manganese (Mn2+) removal from aqueous solution using carbon nanotubes by Kabbashi, Nassereldeen Ahmed, Mirghani, Mohamed Elwathig Saeed, Y., Farhana I.

“…Different pHs are pH 6.0, pH 6.5, pH 7.0, pH 7.5 and pH 8.0, CNT dosages are 5mg, 6.25mg, 7.5mg, 8.75mg or 10mg, contact time are 10 min, 32.5 min, 55 min, 87.5 min and 120 min while the agitation speeds are 100rpm, 150rpm, 200rpm, 250rpm and 300rpm. …”
Get full text

Efficacy of Malaysian plant extracts in preventing peroxidation reactions in model and food oil systems by Jaswir, Irwandi, Hassan, Torla, Mohd Said, Mohd Zaki

“…This was followed by the extracts of limau purut leaves (85 min), peels (60 min), and stems (39 min). The antioxidative activities of these plants, however, were lower than those of rosemary and sage. …”
Get full text

Effects of flux application and melting parameters in investment casting of pure aluminium by in-situ melting technique by Saleh, Aslinda

“…The aluminium granules then were heated at the temperature of 850oC for 30 min in argon environment at the flow rate of argon gas 0.5, 2.5 and 5 l/min to reduce the oxidation of the aluminium granules. …”
Get full text