Tool wear during milling laminated carbon fibre reinforced plastic by Muhamad Khairussaleh, Nor Khairusshima, A.K.M, Amin, C.H., Che Hassan, A.G. , Jaharah

“…Cutting speed of 160–194 m/min and a feed rate of 0.14–0.225 mm/tooth on solid uncoated carbide during the milling process were discussed. …”
Get full text

Poly(Lactic Acid) (PLA)-reinforced Kenaf Bast Fiber Composites: The Effect of Triacetin by Othman, Maizatulnisa

“…The composites, with different fiber loading and triacetin content, were prepared by melt blending techniques using a Brabender internal mixer at 60 rpm and 170�C for 10 min and their properties were examined. Pure PLA was used as a reference for the biocomposite samples. …”
Get full text

Optimization of operating conditions of rotary drum bioreactor for lignin peroxidise production by solid state by Alam, Md. Zahangir, Muyibi, Suleyman Aremu, Al-Mamun, Abdullah, Qudsieh, Isam Y., Suardi, M.

“…The maximum production of LiP was 475.8 U/L while the theoretical yield was 439.6 with the optimum aeration and agitation of 30 l/min and 15 rpm respectively using RDB by solid state bioconversion.…”
Get full text

Fashion-making in the transglobal landscape by Ling, Wessie, Segre Reinach, Simona

Get full text

Beneath the co-created Chinese fashion: translocal and transcultural exchange between China and Hong Kong by Ling, Wessie

Get full text

Effect of multiple extrusions and influence of PP contamination on the thermal characteristics of bottle grade recycled PET by Itim, Bachir, Philip, Mathew

“…The thermal characteristics of bottle grade recycled PET pellets contaminated with 5% PP prepared by multiple extrusions were studied by differential scanning calorimetry (DSC) at constant heating rate of 10 degrees C/min for various extrusion cycles. The peak temperature of crystallization Tc, the enthalpy of crystallization dHc and the degree of crystallinity Xc were found to be dependent on the number of extrusion cycles. …”
Get full text

Pembangunan dan penilaian modul berbantukan komputer bagi subjek pemasaran : Politeknik Port Dickson by Mokhtar, Syamsiah

“…Data dikumpulkan melalui kaedah soal selidik dan dianalisis berdasarkan kekerpan, peratusan dan skor min dengan menggunakan perisian Statistical Package For Social Sciene (SPSS) versi 11.0. …”
Get full text
Get full text
Get full text

Bioprocess optimization for kefiran production by lactobacillus kefiranofaciens by Dailin, Daniel Joe

Get full text

Extraction and microencapsulation of polyphenol-rich antioxidant from Clinacanthus nutans for controlled release formulation by Abdul Karim, Norsuhada

Get full text

A Cryopreservatlon method of Sclzaphyllurn commune local strains by Mohd Kamal, Irnada Syuhaidah, Mohd Nor Rashid, Noraswati, Mel, Maizirwan

“…AU of the treatments were frozen in liquid nitrogen for 7 days followed by thawing (cooling) at 30°C for 30 min. The grains were inoculated onto PDA agar to observe the viability (rate of survival) of the seeds. …”
Get full text

Essential work of fracture and acoustic emission study on TPNR composites reinforced by Kenaf Fiber by Anuar, Hazleen

“…The strain rate was fixed at 2 mm/min. The specific work of fracture (we) and plastic work (bwp) showed the highest energy for TPNR that corresponds to its ductility and allows the application of the EWF approach. …”
Get full text

Powder mixed micro electro discharge milling of titanium alloy: Investigation of material removal rate by Ali, Mohammad Yeakub, Abdul Rahman, Nur Atiqah, Mohamad Aris, Erniyati

“…In this experimental investigation, maximum MRR of 7.3 µg/min was obtained for 24.75 g/l SiC powder concentration and 56.77 µJ discharge energy. …”
Get full text

Effects of polar cosolvents on cocoa butter extraction using supercritical carbon dioxide by Asep, E. K., Jinap, Selamat, Jahurul, Md. Haque Akanda, Sarker, Md. Zaidul Islam, Singh, H.

“…Cocoa butter was successfully extracted from cocoa liquor by supercritical carbondi oxide (SC-CO2) at 35 MPa, 60 oC and 2 mL/min with 5%, 15% and 25% cosolvents. The extraction yield of tryglicerides (TG) and fatty acid (FA) compositions were significantly influenced by the concentration of polar cosolvents. …”
Get full text

علم الصرف العربي المتقدّم لأغراض علمية (دراسة في الفعل وأبنيته وددلالته وأزمنته من خلال شواهد القرآن الكريم)... by Dollah, Nafi@Hanafi

“…To study about alsorf al-Arabi al-mutaqaddim li-aghradh ilmiyyah min khilal al-Quranul karim theoritically and practically…”
Get full text

Statistical analaysis for removal of Cadmium from aqueous solution at High pH by Kabbashi, Nassereldeen Ahmed, Daoud, Jamal Ibrahim, Mirghani, Mohamed Elwathig Saeed, Rosli, Nurhasni Falina

“…From the results obtained, the highest percentage removal of Cd using CNT is at pH7, 10 mg of CNTs dosage, contact time of 120 min and agitation speed of 150 rpm which gave 19.14% removal.…”
Get full text

Prediction of minimum chip thickness in tool based micro end milling by Ali, Mohammad Yeakub, Khan, Ahsan Ali, Mohamad Asharaf, Asfana Banu, Abdul Wahab, Adibah

“…The optimum value for the minimum chip thickness was 375 nm with cutting speed of 2275 rpm, feed rate of 2.6 mm/min, and depth of cut 0.6 μm using Ø 0.8 mm tool. …”
Get full text

BE-P32: fabrication of Nahar Seed Oil for biolubricant production by Mirghani, Mohamed Elwathig Saeed, Kabbashi, Nassereldeen Ahmed, Qudsieh, Isam Y., Ibrahim, Irmanisha

“…From the result obtained, the maximum viscosity of NSO biolubricant was achieved when the temperature was 150oC, 80 min in reaction time and 0.8% catalyst dosage. …”
Get full text

Kajian terhadap faktor-faktor mempengaruhi pencapaian pelajar dalam penilaian menengah rendah di Sabah by Salleh, Mohamad Johdi

“…Hasil dari penganalisisan data ini diterangkan dalam bentuk kekerapan, peratusan dan min. Dapatan kajian menunjukkan bahawa domain kendiri, guru, ibubapa, dan rakan banyak mempengaruhi strategi dan gaya pembelajaran pelajar yang mendorong kepada pencapaian PMR.…”
Get full text

Powder mixed micro electro discharge milling of titanium alloy: Investigation of material removal rate by Ali, Mohammad Yeakub, Abdul Rahman, Nur Atiqah, Mohamad Aris, Erniyati

“…In this experimental investigation, maximum MRR of 7.3 µg/min was obtained for 24.75 g/l SiC powder concentration and 56.77 µJ discharge energy. …”
Get full text

The economic impact of using negative rake angle in high speed hard turning by Al Hazza, Muataz Hazza Faizi, Adesta, Erry Yulian Triblas

“…The experiments were obtained with constant cutting depth (0.15 mm), constant feed rate (0.075 mm), constant cutting speed (250 m/min) and five different tool rake angles0o,-3, -6,-9 and -12). …”
Get full text