Enhanced mechanical and failure characteristic of woven carbon fiber reinforced thermoplastic laminates using core-shell particles by Sharma, Anurag, Joshi, Sunil Chandrakant

“…It was found that the addition of 4wt% CSPs led to the maximum improvement of 59%, 26%, 42%, and 48% respectively, in flexural strength and modulus, interlaminar shear strength, and compression strength, compared to the pristine composites. …”
Get full text
Get full text

The effect of JGP slab on the stability of deep excavation by Lim, Samuel Bi Yao

“…An increase in thickness and shear strength parameter of the JGP will yield a more stable excavation, but at the expense of more internal forces in the wall. …”
Get full text

Ultrsonic testing of bond integrity in adhesive joints between 2 similar metals by Ang, Marcus

“…Lastly the specimens with fully cured adhesive are subjected to the instron lap-joint shear test. The maximum load of the specimen will be determined at the point of fracture at the lap-joint. …”
Get full text

New material brazing by Sivaprasaath, Chandrasagaran

“…The braze had an average tensile shear strength of 162.31MPa. It was concluded, that the Nickel-Chromium-Niobium braze was an improvement over the brazes used in industry. …”
Get full text

Predicting response of reinforced concrete slabs under low-velocity impact by Xiao, Yao, Li, Bing, Fujikake, Kazunori

“…In this model, the slab stiffness is calculated based on its dynamic load–displacement curve, which is built using moment–curvature analysis and critical shear crack theory. The contact between the impactor and the impacted RC slab is modelled with an elastic spring and a viscous damper. …”
Get full text
Get full text

Effect of prebonding anneal on the microstructure evolution and Cu–Cu diffusion bonding quality for three-dimensional integration by Peng, L., Zhang, L., Li, H.Y., Lim, Dau Fatt, Tan, Chuan Seng

“…As compared with the control wafer pair with a prebonding anneal at 300°C for 1 h in N2, the wafer pair without a prebonding anneal showed greater improvement in void density based on c-mode scanning acoustic microscopy (c-SAM). Dicing yield and shear strength were also enhanced when a prebonding anneal was not applied. …”
Get full text
Get full text

Surface modified polymers for controlled macroscopic functions by Chng, S

“…</p> <p>Lastly, a surprising finding on adhesion function generated from the diaryldiazo compound is disclosed, with preliminary results of lap-shear and t-peel tests showing high levels of adhesion. …”

Hybrid nanofluid flow over a shrinking rotating disk: response surface methodology by Yahaya, Rusya Iryanti, Md Arifin, Norihan, Pop, Ioan, Md Ali, Fadzilah, Mohamed Isa, Siti Suzilliana Putri

“…For efficient heating and cooling applications, minimum wall shear stress and maximum heat transfer rate are desired. …”
Get full text

Effect of pH on phosphorylation of sago starch by Muhammad, K., Hussin, F., Man, Y.C., Ghazali, H.M.

“…At the reaction pH of 9, a starch phosphate obtained using STPP exhibited low hot paste viscosity but high cold paste viscosity and shear stability when cooked at 95 °C. Treatment of sago starch with a mixture of STPP and STMP yielded the best starch phosphate at the reaction pH of 9.5 which showed lower hot paste viscosity and much higher cold paste viscosity than that of sago starch phosphates prepared at pH 9 using STPP. …”
Get full text

Poroelastic behavior and water permeability of human skin at the nanoscale by Oftadeh, Ramin, Azadi, Mojtaba, Donovan, Mark, Langer, Jessica, Liao, I-Chien, Ortiz, Christine, Grodzinsky, Alan J, Luengo, Gustavo S

“…Furthermore, our methods can assess the ability of these individual layers to respond to both compressive and shear deformations. In addition, since human skin is mechanically loaded over a wide range of deformation rates (frequencies), we studied the biophysical properties of skin over a wide frequency range. …”
Get full text

Mach 3.5 Compression Corner Control Using Microvortex Generators by Gochenaur, Daniel C., Williams, Rhys D., Sabnis, Kshitij, Babinsky, Holger

“…These findings are used to propose a mechanism of VG control, highlighting the role of VGs in enhancing mixing in the separated shear layer, leading to earlier reattachment and an overall reduction in separation length.…”
Get full text

A Report From the Drilling Riser VIV and Wellhead Fatigue JIP: Full-Scale Drilling Riser VIV Measurements and Comparisons With Predictions by Resvanis, Themistocles L., Vandiver, J. Kim, McNeill, Scot

Get full text

Phase Change Dispersion Made by Condensation–Emulsification by Fischer, Ludger J., Dhulipala, Somayajulu, Varanasi, Kripa K.

“…They are manufactured by high shear equipment like rotor-stator systems. A recently published method to produce emulsions by the direct condensation of the dispersed phase into the emulsifier-containing continuous phase is applied on this PCD. n-Decane is used as PCM, and the melting temperature is -30 °C. …”
Get full text

Explaining the spread in measurement of PDMS elastic properties: influence of test method and curing protocol by Varner, Hannah, Cohen, Tal

“…Polydimethylsiloxane (PDMS), commonly obtained from Dow as SYLGARD 184, is a ubiquitous such material, which has been integral to the rapid development of biocompatible microfluidic devices and flexible electronics in recent decades. However, reported shear moduli of this material range over 2 orders of magnitude for similar chemical compositions. …”
Get full text

The Influence of Root Geometry on Soil Cohesion and Anchoring Ability through Geologic Time by Colicci, Vittorio

“…Force laws were then derived to approximate the anchoring contributions of root weight, sediment weight, static friction, and shear strength. This analysis revealed a strong dependence on the span, surface area, and volume of the root system, which were used to normalize values across different geometries. …”
Get full text

Turbulent Flow over a Flexible Wall Undergoing a Streamwise Traveling Wavy Motion by Shen, Lian, Zhang, Xiang, Yue, Dick K.P., Triantafyllou, Michael S.

“…Above a threshold value of c/U ≈ 1, separation is eliminated; and, relative to small- c/U cases, turbulence intensity and turbulent shear stress are reduced significantly. The drag force decreases monotonically as c/U increases while the power required for the transverse motion generally increases for large c/U; the net power input is found to reach a minimum at c/U ≈ 1.2 (for fixed U). …”
Get full text

Polydopamine nano-hybrids : interfacial and photoactive role in epoxy nanocomposites and polymerization by Subramanian, Alamelu Suriya

“…The results showed as much as 100% improvement in lap shear strength compared to unfilled epoxies bonded on aluminum substrates. …”
Get full text

Seismic performance of corroded reinforced concrete column-slab connections by Sutantyo, Samuel Kurniawan

“…Due to the lack of any shear reinforcement and drop panel, the slab-column connection is susceptible punching failure, especially when the building is also subjected to earthquake loadings. …”
Get full text

Design of floating photovoltaic structures in coastal waters by Tan, Pek Yeu

“…The rheological properties of the covers will be tested using DMA via small amplitude oscillatory shear test. The experiments will attempt to study the effects of stiffness of cover on the amplitude of cover, the wave attenuation of cover, and the damping effect of the cover. …”
Get full text

Behaviour of continuous deep beams with unsymmetrical web openings by Tham, Win Yen

“…Due to their dimensions, deep beams are predominantly controlled by shear strength. Precise analytical study on reinforced concrete deep beams has always been a complex issue and the presence of web openings in continuous deep beams exacerbates the situation. …”
Get full text