-
521
Kinetics of cadmium adsorption by CNTs grown on PACs
Published 2012“…Based on the kinetics study, the pseudo second order was the best fit with R2 of 0.996 and model constants were qe = 34.29 (mg/g) and K2 = 0.0013 (g/mg.min). Coefficients for the pseudo first order were qe= 21.145 (mg/g) and K1= 0.09 (min-1) with R2 of 0.936. …”
Get full text
Get full text
Proceeding Paper -
522
Reduction of high content of free fatty acid in sludge palm oil via acid catalyst for biodiesel production
Published 2011“…An acid catalyzed esterification process was carried out to evaluate the low content of FFA in the treated SPO with the effects of other parameters such as molar ratio of methanol to SPO (6:1–14:1), temperature (40–80 °C), reaction time (30–120 min) and stirrer speed (200–800 rpm). The results showed that the FFA of SPO was reduced from 23.2% to less than 2% FFA using 0.75% wt/wt of sulphuric acid with the molar ratio of methanol to oil of 8:1 for 60 min reaction time at 60 °C. …”
Get full text
Article -
523
An evaluation of the association between anthropometric measurements and cardiorespiratory fitness using the forest service step and the Ruffier-Dickson Test
Published 2022“…Results: The VO2max values for these participants ranged between 35.15 and 67.32 mL∙min-1∙kg-1. Linear regression analysis showed a correlation (P<0.01) between measured VO2max (L∙min-1) and height (m), weight (kg), waist (cm) and BMI (kg/m²). …”
Get full text
Article -
524
Kemahiran employability dalam kalangan pelajar Kolej Vokasional Kluang Johor
Published 2014“…Data�data yang dikumpulkan dianalisis menggunakan kaedah skor min, sisihan piawai dan anova satu hala. Hasil dapatan menunjukkan skor min elemen belajar pada tahap tinggi dan pada pangkatan min yang pertama. …”
Get full text
Get full text
Get full text
Thesis -
525
Pembangunan kemahiran penyelesaian masalah berlandaskan projek origami
Published 2014“…Dapatan keseluruhan min sebelum aktiviti bengkel ialah 3.43 manakala selepas aktiviti bengkel min ialah 4.03. …”
Get full text
Get full text
Thesis -
526
Kesediaan pelajar terhadap kit 'Smart CCTV' bagi pelajar teknologi elektronik di Kolej Vokasional
Published 2018“…Dapatan analisis bagi persepsi pelajar terhadap penggunaan ABBM keseluruhannya skor min ketiga-tiga domain; kognitif, psikomotor dan afektif, masing-masing mempunyai skor min 3.25, 3.21 dan 3.30, maka ketiga-tiga domain memberikan kesan yang sama terhadap pelajar berkenaan dengan penggunaan ABBM kit ‘Smart CCTV’. …”
Get full text
Get full text
Thesis -
527
Penggunaan kaedah nyanyian dalam mata pelajaran reka bentuk dan teknologi
Published 2018“…Kajian rintis dijalankan di Sekolah Rendah Agama Bersepadu Mersing dengan jumlah responden seramai 30 orang pelajar. Nilai min daripada hasil kajian bagi minat ialah 4.93 dan bagi item daya ingatan nilai min ialah 4.66 menggunakan perisian Statistical Package for the Social Sciences (Version 22.0). …”
Get full text
Article -
528
Acceptance of IIUM.FM by Human Sciences undergraduate students
Published 2011“…The objectives of this study are to (1) find out the patterns of listening among students, (2) determine the knowledge about IIUM.FM among students, (3) find out the perceived usefulness of listening to IIUM.FM among students, (4) find out the attitude of students towards listening to IIUM.FM, and (5) analyze the relationship between knowledge about IIUM.FM, the perceived usefulness of listening, attitude towards listening and actual listening to IIUM.FM. …”
Get full text
Proceeding Paper -
529
Strength prediction and durability performance of concrete containing coal bottom ash as supplementary cementitious material under aggressive environment
Published 2019“…Initially, raw CBA was grinded for various periods, to get different particle fineness, then CBA was incorporated as replacement of OPC in concrete at various percentages 10%, 20% and 30% by weight of cement. …”
Get full text
Get full text
Get full text
Thesis -
530
Reverse engineering of automotive piston
Published 2012“…The wear test was performed using pin-on-disk (POD) machine. The tensile test results showed that the ultimate tensile strength and modulus of elasticity of the piston were 215 MPa and 73 GPa respectively, whereas the Vickers hardness number of this material was found to be 155 HV0.5kgf. …”
Get full text
Proceeding Paper -
531
Electronically reconfigurable and conformal triband antenna for wireless communications systems and portable devices
Published 2022“…This is achieved by connecting two open-ended stubs to a modified triangular patch radiator using PIN diodes. The antenna’s performance was optimized using a 3D electromagnetic solver and its performance was verified through measurements. …”
Get full text
Get full text
Article -
532
Preliminary analyses on detection of SYT-SSX fusion-transcripts in Synovial Sarcoma
Published 2012“…Method: Paraffin-embedded fixed-tissue (PEFT) blocks of 3 confirmed and 15 possible cases of Synovial Sarcoma were retrieved from Department of Pathology, Tengku Ampuan-Afzan Hospital, Kuantan and subjected to RNA purification using the standard spin column protocol. A one step direct RT-PCR was performed using SYT-SSX and PBGD primer sets for detection of SYT-SSX fusion gene and the reference gene PBGD respectively. …”
Get full text
Proceeding Paper -
533
Molecular cloning and expression of voltagedependent Anion Channel 2 (VDAC2) from electrically stimulated chicken for antibody development
Published 2012“…Recombinant VDAC2 protein was purified by Ni-NTA spin-column and Western blot performed on the purified recombinant VDAC2 protein with anti-His followed by AP goat anti-rabbit revealed a 30 kDa protein band and confirmed the protein expression.…”
Get full text
Get full text
Proceeding Paper -
534
Technology commercialisation at research universities in Malaysia
Published 2024Get full text
Thesis -
535
“The facts don’t work”: the EU referendum campaign and the journalistic construction of ‘post-truth politics’
Published 2018“…However, it can be challenged on the basis that political communications, in the form of spin, propaganda, rhetoric and public relations has always included such techniques (Negrine, 2008: 13). …”
Get full text
Article -
536
Capabilities of cermets tools for high speed machining of austenitic stainless steel
Published 2006“…In the present work cermet tools coated with titanium nitride were used to turn austenitic stainless steel at speeds between 300 and 700 m min-1. Feed rates were varied between 0.05 to 0.4 mm rev-1. …”
Get full text
Article -
537
The effect of milling parameters on laminated carbon fibre reinforced plastic (CFRP)
Published 2012“…A solid uncoated carbide end mill cutting tool and a CFRP panel with fibre orientation of 0/45° were used to investigate the machinability of CFRP composite during milling; a cutting speed of 16 m/min to 240 m/min with a feed rate of 0.0125 mm/tooth to 0.0125 mm/tooth were set. …”
Get full text
Article -
538
-
539
A comparative study of the effectiveness of ca-alginate and k-carrageenan beads as support material for enzyme immobilization
Published 2015“…Michaelis parameters Vmax and KM for Ca-alginate were found to be 65.36 mmol/min and 8.60 mM respectively, and for K-carrageenan 61.73 mmol/min and 0.94 mM respectively, while Michaelis constants for the free enzyme were 70.42 mmol/min and 2.71 mM. …”
Get full text
Get full text
Proceeding Paper -
540
Photocatalytic degradation of triclocarban in aqueous solution using a modified zeolite/TiO2 composite: kinetic, mechanism study and toxicity assessment
Published 2023“…The kinetic study by following Langmuir-Hinshelwood(L-H) model and pseudo first order, the significant constant rate was obtained at pH 11 which was 0.079 ppm/min, 0.75 cm2 of MZTC catalyst loading size achieved 0.076 ppm/min and 5 ppm of TCC initial concentration reached 0.162 ppm/min. …”
Get full text
Article