Characteristics of Hybrid Nanolubricants for MQL Cooling lubrication machining application

Characteristics of Hybrid Nanolubricants for MQL Cooling lubrication machining application

Efficient and effective lubricants have great application prospects in the manufacturing industries. Minimum quantity lubrication (MQL) machining with low flow rate of nanolubricants is investigated for cooling and lubrication during the process. This paper investigates the characterization of graph...

書目詳細資料
Main Authors:	Syh Kai, Lim, Wan Hamzah, Azmi, Ahmad Shahir, Jamaludin, Ahmad Razlan, Yusoff
格式:	Article
語言:	English
出版:	MDPI 2022
主題:	TS Manufactures
在線閱讀:	http://umpir.ump.edu.my/id/eprint/36675/1/11%20Lim%20et%20al.%202022%20Lubricants.pdf

相似書籍

Effects of Hybrid Nanocooling-Lubricants MQCL on Machining Temperature and Tool Wear Mechanisms under Turning Process of Titanium Alloy
由: Lim, Syh Kai, et al.
出版: (2023)

Refining the composition of recycled spent lubricants mixed with alumina nanofluids for machining purpose
由: Lim, Syh Kai, et al.
出版: (2020)

Study on the effectiveness of Extreme Cold Mist MQL system on turning process of stainless steel AISI 316
由: Ahmad Shahir, Jamaludin, et al.
出版: (2018)

Bold approach in finite element simulation on minimum quantity lubrication effect during machining
由: Ainur Munira, Rosli, et al.
出版: (2019)

Experimental Investigation on Newtonian Behaviour and Viscosity of TiO2/PVE Nanolubricants for Application in Refrigeration System
由: Mohd Farid, Ismail, et al.
出版: (2022)

Investigations of nanocoolant based Al2O3 for improving cooling performance in hot press forming
由: Lim, Syh Kai
出版: (2018)

Chatter detection on thin wall machining of alluminum alloy under MQL condition
由: Amirul Syafiq, Ibrahim
出版: (2016)

Current and future challenges of hybrid electrochemical-mechanical machining process for micro- and nano-manufacturing
由: Ahmad Shahir, Jamaludin, et al.
出版: (2024)

Effect of nozzle distance and cutting parameters on MQL machining of AISI 1045
由: Amiril Sahab, Abdul Sani, et al.
出版: (2019)

Experimental Validation for Hot Stamping Process by Using Taguchi Method
由: Mohd Fawzi, Zamri, et al.
出版: (2016)

Recent Study on Hard to Machine Material – Micromilling process
由: Ainur Munira, Rosli, et al.
出版: (2021)

Mini review of carbon based additive in machining lubricant
由: K., Jun Li, et al.
出版: (2020)

Surface texturing potential on carbide insert in reducing aluminium alloy adhesiveness during machining
由: Chia, Yun Qi, et al.
出版: (2019)

Tool Wear Observation During Unconventional Low Speed Machining Using Low Cost Micromilling
由: Ainur Munira, Rosli, et al.
出版: (2021)

Kurtosis quantification of different minimal quantity lubrication effects in machining cast iron with coated and uncoated tool
由: N., Jamil, et al.
出版: (2018)

The stability of TiO2/POE nanolubricant for automotive air-conditioning system of hybrid electric vehicles
由: A. H, Hamisa, et al.
出版: (2020)

Study of tool wear progression using nano-hybrid Cryogenic MQL in milling titanium alloy
由: Nurul Dayana, Mohd Noor, et al.
出版: (2023)

The analysis of grid independence study in continuous disperse of MQL delivery system
由: Z., Zulkifli, et al.
出版: (2023)

Application of minimum quantity lubrication for various machining processes - A mini review
由: N. E. H., Zamiruddin, et al.
出版: (2020)

Rapid Direct Continuous Method for Hot Embossing of Glass Microlens Array Combined with CO2 Laser Irradiation and External Preheating/Cooling
由: Syarifah Nur Hasanah, Syed Kamarudin, et al.
出版: (2021)

Hybrid CNC–MXene nanolubricant for tribological application: Characterization, prediction, and optimization of thermophysical properties evaluation
由: Sakinah, Muhamad Hisham, et al.
出版: (2024)

Experimental of Hot Machining for Stainless Steel 316L Cutting Process
由: Cholis, N., et al.
出版: (2024)

Effects of grouser movement to sand-grouser interaction on unconsolidated soft sand incline using discrete element method (DEM) simulation
由: Siti Suhaila, Sabarudin, et al.
出版: (2019)

Study on the effects of nozzle distance to surface roughness of workpiece under minimum quantity lubricant (MQL) milling process
由: Firdaus Shazriq, Mohd Fadzil, et al.
出版: (2018)

Comparison on cooling efficiency of cooling pad materials for evaporative cooling system
由: Radhiyah, Abd Aziz, et al.
出版: (2018)

A significant review on utilization of hybrid nanofluid in heat exchangers: Theoretical and experimental
由: Haziqatulhanis, Ibrahim, et al.
出版: (2019)

A Review on Automotive Tires Significant Characteristic Identification for General Consumers
由: Ahmad Noor Syukri, Zainal Abidin, et al.
出版: (2022)

The characteristics of hybrid Al2O3:SiO2 nanofluids in cooling plate of PEMFC
由: Muhammad Syafiq, Idris, et al.
出版: (2021)

High precision estimation on physical behavior for cutting with various tool rake angle by finite element method
由: Ahmad Shahir, Jamaludin, et al.
出版: (2018)

Study of an optimal surface property of carbide cutting tool by surface modification method
由: Razali, Mohd Nizar Mhd, et al.
出版: (2019)

Physical properties of new formulation of hybrid nanofluid-based Minimum Quantity Lubrication (MQL) from modified jatropha oil as metalworking fluid
由: Ainaa Mardhiah, Sabri, et al.
出版: (2023)

Performance evaluation of different types of cutting fluid in the machining of aisi 01 hardened steel using pulsed jet minimal quantity lubrication system
由: Hamdan, A., et al.
出版: (2011)

In-situ worn geometry effect over the surface roughness propagation during micro milling process
由: Nurul Farhana, Mohadzir, et al.
出版: (2020)

Modelling of fuzzy inference system for micro milling - a preliminary study through FEM
由: Ainur Munira, Rosli, et al.
出版: (2018)

Taguchi method approach on effect of lubrication condition on surface roughness in milling operation
由: Mohamad Syahmi, Shahrom
出版: (2012)

Effect of rake angle and feed rate on tool wear and surface topography for different chip size in machining carbon steels
由: Mohd Fawzi, Zamri, et al.
出版: (2022)

Effect of mig and tig welding on hybrid structure using modal analysis
由: Ilmanfaiq, Hamzah
出版: (2013)

Design of spline surface vacuum gripper for pick and place robotic arms
由: Nursyiqah, Jasman, et al.
出版: (2020)

Experimental investigation of recycled machining coolant mixed with nanofluids based Al2O3
由: S. K., Lim, et al.
出版: (2019)

Heuristic design of U-shaped die cooling channel for producing ultra-high strength steel using hot press forming
由: Mohd Fawzi, Zamri, et al.
出版: (2018)