Characteristics of Hybrid Nanolubricants for MQL Cooling lubrication machining application

Characteristics of Hybrid Nanolubricants for MQL Cooling lubrication machining application

Efficient and effective lubricants have great application prospects in the manufacturing industries. Minimum quantity lubrication (MQL) machining with low flow rate of nanolubricants is investigated for cooling and lubrication during the process. This paper investigates the characterization of graph...

Descripció completa

Dades bibliogràfiques
Autors principals:	Syh Kai, Lim, Wan Hamzah, Azmi, Ahmad Shahir, Jamaludin, Ahmad Razlan, Yusoff
Format:	Article
Idioma:	English
Publicat:	MDPI 2022
Matèries:	TS Manufactures
Accés en línia:	http://umpir.ump.edu.my/id/eprint/36675/1/11%20Lim%20et%20al.%202022%20Lubricants.pdf

Ítems similars

Effects of Hybrid Nanocooling-Lubricants MQCL on Machining Temperature and Tool Wear Mechanisms under Turning Process of Titanium Alloy
per: Lim, Syh Kai, et al.
Publicat: (2023)

Refining the composition of recycled spent lubricants mixed with alumina nanofluids for machining purpose
per: Lim, Syh Kai, et al.
Publicat: (2020)

Study on the effectiveness of Extreme Cold Mist MQL system on turning process of stainless steel AISI 316
per: Ahmad Shahir, Jamaludin, et al.
Publicat: (2018)

Bold approach in finite element simulation on minimum quantity lubrication effect during machining
per: Ainur Munira, Rosli, et al.
Publicat: (2019)

Experimental Investigation on Newtonian Behaviour and Viscosity of TiO2/PVE Nanolubricants for Application in Refrigeration System
per: Mohd Farid, Ismail, et al.
Publicat: (2022)

Chatter detection on thin wall machining of alluminum alloy under MQL condition
per: Amirul Syafiq, Ibrahim
Publicat: (2016)

Current and future challenges of hybrid electrochemical-mechanical machining process for micro- and nano-manufacturing
per: Ahmad Shahir, Jamaludin, et al.
Publicat: (2024)

Effect of nozzle distance and cutting parameters on MQL machining of AISI 1045
per: Amiril Sahab, Abdul Sani, et al.
Publicat: (2019)

Mini review of carbon based additive in machining lubricant
per: K., Jun Li, et al.
Publicat: (2020)

Recent Study on Hard to Machine Material – Micromilling process
per: Ainur Munira, Rosli, et al.
Publicat: (2021)

Investigations of nanocoolant based Al2O3 for improving cooling performance in hot press forming
per: Lim, Syh Kai
Publicat: (2018)

Kurtosis quantification of different minimal quantity lubrication effects in machining cast iron with coated and uncoated tool
per: N., Jamil, et al.
Publicat: (2018)

A Review on Automotive Tires Significant Characteristic Identification for General Consumers
per: Ahmad Noor Syukri, Zainal Abidin, et al.
Publicat: (2022)

Surface texturing potential on carbide insert in reducing aluminium alloy adhesiveness during machining
per: Chia, Yun Qi, et al.
Publicat: (2019)

Tool Wear Observation During Unconventional Low Speed Machining Using Low Cost Micromilling
per: Ainur Munira, Rosli, et al.
Publicat: (2021)

Experimental Validation for Hot Stamping Process by Using Taguchi Method
per: Mohd Fawzi, Zamri, et al.
Publicat: (2016)

Study of tool wear progression using nano-hybrid Cryogenic MQL in milling titanium alloy
per: Nurul Dayana, Mohd Noor, et al.
Publicat: (2023)

Application of minimum quantity lubrication for various machining processes - A mini review
per: N. E. H., Zamiruddin, et al.
Publicat: (2020)

The stability of TiO2/POE nanolubricant for automotive air-conditioning system of hybrid electric vehicles
per: A. H, Hamisa, et al.
Publicat: (2020)

The analysis of grid independence study in continuous disperse of MQL delivery system
per: Z., Zulkifli, et al.
Publicat: (2023)

Rapid Direct Continuous Method for Hot Embossing of Glass Microlens Array Combined with CO2 Laser Irradiation and External Preheating/Cooling
per: Syarifah Nur Hasanah, Syed Kamarudin, et al.
Publicat: (2021)

Hybrid CNC–MXene nanolubricant for tribological application: Characterization, prediction, and optimization of thermophysical properties evaluation
per: Sakinah, Muhamad Hisham, et al.
Publicat: (2024)

Evaluation of mist flow characteristic and performance in Minimum Quantity Lubrication (MQL) machining
per: Abd Rahim, Erween, et al.
Publicat: (2018)

The characteristics of hybrid Al2O3:SiO2 nanofluids in cooling plate of PEMFC
per: Muhammad Syafiq, Idris, et al.
Publicat: (2021)

Comparison on cooling efficiency of cooling pad materials for evaporative cooling system
per: Radhiyah, Abd Aziz, et al.
Publicat: (2018)

Study on the effects of nozzle distance to surface roughness of workpiece under minimum quantity lubricant (MQL) milling process
per: Firdaus Shazriq, Mohd Fadzil, et al.
Publicat: (2018)

Effects of grouser movement to sand-grouser interaction on unconsolidated soft sand incline using discrete element method (DEM) simulation
per: Siti Suhaila, Sabarudin, et al.
Publicat: (2019)

Physical properties of new formulation of hybrid nanofluid-based Minimum Quantity Lubrication (MQL) from modified jatropha oil as metalworking fluid
per: Ainaa Mardhiah, Sabri, et al.
Publicat: (2023)

Performance evaluation of different types of cutting fluid in the machining of aisi 01 hardened steel using pulsed jet minimal quantity lubrication system
per: Hamdan, A., et al.
Publicat: (2011)

High precision estimation on physical behavior for cutting with various tool rake angle by finite element method
per: Ahmad Shahir, Jamaludin, et al.
Publicat: (2018)

Study of an optimal surface property of carbide cutting tool by surface modification method
per: Razali, Mohd Nizar Mhd, et al.
Publicat: (2019)

Comparative study on the performance of the MQL nanolubricant and conventional flood lubrication techniques during grinding of Si3N4 ceramic
per: Dambatta, Yusuf S., et al.
Publicat: (2018)

Experimental of Hot Machining for Stainless Steel 316L Cutting Process
per: Cholis, N., et al.
Publicat: (2024)

In-situ worn geometry effect over the surface roughness propagation during micro milling process
per: Nurul Farhana, Mohadzir, et al.
Publicat: (2020)

Taguchi method approach on effect of lubrication condition on surface roughness in milling operation
per: Mohamad Syahmi, Shahrom
Publicat: (2012)

Effect of mig and tig welding on hybrid structure using modal analysis
per: Ilmanfaiq, Hamzah
Publicat: (2013)

Modelling of fuzzy inference system for micro milling - a preliminary study through FEM
per: Ainur Munira, Rosli, et al.
Publicat: (2018)

Effects of minimum quantity lubrication technique in different machining
per: Urmi, W. T., et al.
Publicat: (2022)

Sustainable machining process calculator
per: A. R., Yusoff, et al.
Publicat: (2018)

A parametric study on design and characteristics of stepwise-built functionally graded Hydroxyapatite/Titanium
per: Siti Nur Sakinah, Jamaludin
Publicat: (2015)