Apply implicitly restarted Arnoldi method to solving eigenvalue problem and reducing dimensionality in neutron diffusion

Similar Items

• Model reduction for active control design using multiple-point Arnoldi methods
  by: Lassaux, G., et al.
  Published: (2003)
• Uncertainty Analysis of Neutron Diffusion Eigenvalue Problem Based on Reduced-order Model
  by: In order to improve the efficiency of core physical uncertainty analysis based on sampling statistics, the proper orthogonal decomposition (POD) and Galerkin projection method were combined to study the application feasibility of reduced-order model based on POD-Galerkin method in core physical uncertainty analysis. The two-dimensional two group TWIGL benchmark question was taken as the research object, the key variation characteristics of the core flux distribution were extracted under the finite perturbation of the group constants of each material region, and the full-order neutron diffusion problem was projected on the variation characteristics to establish a reduced-order neutron diffusion model. The reduced-order model was used to replace the full-order model to carry out the uncertainty analysis of the group constants of the material region. The results show that the bias of the mathematical expectation of keff calculated by reduced-order and full-order models is close to 1 pcm. In addition, compared with the calculation time required for uncertainty analysis of full-order model, the analysis time of reduced-order model (including the calculation time of the full-order model required for the construction of reduced-order model) is only 11.48%, which greatly improves the efficiency of uncertainty analysis. The biases of mathematical expectation of keff calculated by reduced-order and full-order models based on Latin hypercube sampling and simple random sampling are less than 8 pcm, and under the same sample size, the bias from the Latin hypercube sampling result is smaller. From the TWIGL benchmark test results, under the same sample size, Latin hypercube sampling method is more recommended for POD-Galerkin reduced-order model.
  Published: (2023-08-01)
• Simulation of neutron flux silicon, cadmium and plumbum using monte carlo method /
  by: Hafidah Hamzah, 1983-, et al.
  Published: (2010)
• Simulation of neutron flux silicon, cadmium and plumbum using monte carlo method [electronic resource] /
  by: Hafidah Hamzah, 1983-, et al.
  Published: (2010)
• Restarting projection methods for rational eigenproblems arising in fluid‐solid vibrations
  by: Marta M. Betcke, et al.
  Published: (2008-06-01)