Microstructure formation during thermomechanical processing in Ti-17 alloy

The microstructure evolution during solution treatment at (alpha+beta) two phase region and subsequent aging process at 620 ˚C, after compressing the specimen in beta structure to different strain (0-70%) followed by cooling to room temperature has been investigated. Deformation strain hardly affect...

Mô tả đầy đủ

Chi tiết về thư mục
Những tác giả chính: Chandiran Elango, Miyamoto Goro, Furuhara Tadashi
Định dạng: Bài viết
Ngôn ngữ:English
Được phát hành: EDP Sciences 2020-01-01
Loạt:MATEC Web of Conferences
Truy cập trực tuyến:https://www.matec-conferences.org/articles/matecconf/pdf/2020/17/matecconf_ti2019_12006.pdf
Miêu tả
Tóm tắt:The microstructure evolution during solution treatment at (alpha+beta) two phase region and subsequent aging process at 620 ˚C, after compressing the specimen in beta structure to different strain (0-70%) followed by cooling to room temperature has been investigated. Deformation strain hardly affects the total volume fraction of alpha phase after the solution treatment and aging process. On the other hand, with an increase in deformation strain, the volume fraction of the primary alpha phase increased although secondary alpha phase decreased, during the aging process, scuhdecrease in secondary alpha phase volume fraction results in a decrease in the strength. The loss of coherency of alpha/beta interphase boundaries at higher deformation strain promoted by dynamic recovery increases the interfacial mobility; which results in faster growth of primary alpha, thereby decreases secondary alpha precipitation.
số ISSN:2261-236X