Influence of surface roughness on selected properties of the TiAlN coating
The HS6-5-2C steel samples with different surface roughness were used for the tests. After grinding had a roughness parameter of Ra = 0,03 μm, and after polishing Ra = 0,01 μm. A TiAlN coating was applied to the substrate prepared in this way. Using a confocal microscope with an interferometric mode...
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Croatian Metallurgical Society
2024-01-01
|
| Series: | Metalurgija |
| Subjects: | |
| Online Access: | https://hrcak.srce.hr/file/443749 |