Enhancing Energy Efficiency and Retention of Bioactive Compounds in Apple Drying: Comparative Analysis of Combined Hot Air–Infrared Drying Strategies

The drying process is one of the oldest methods used to obtain food products that could be stored for a long time. However, drying is an energy-intensive process. Additionally, convective drying, due to the high temperature used during the process, results in loss in bioactive substances as well as...

Full description

Bibliographic Details
Main Authors: Milad Teymori-Omran, Ezzatollah Askari Asli-Ardeh, Ebrahim Taghinezhad, Ali Motevali, Antoni Szumny, Małgorzata Nowacka
Format: Article
Language:English
Published: MDPI AG 2023-06-01
Series:Applied Sciences
Subjects:
Online Access:https://www.mdpi.com/2076-3417/13/13/7612
Description
Summary:The drying process is one of the oldest methods used to obtain food products that could be stored for a long time. However, drying is an energy-intensive process. Additionally, convective drying, due to the high temperature used during the process, results in loss in bioactive substances as well as nutritional value. Thus, in this research, apple slices were dried in a combined hot air–infrared air dryer with four different drying strategies and drying kinetics, internal and external mass transfer (Crank and Dincer models), and then the energy parameters were investigated. The first, second, third, and fourth strategies, respectively, include one-stage drying with a hot air (HA) or infrared energy source (IR), one stage but with two sources of hot air and infrared (HA–IR), and then there are two stages of first hot air and then infrared drying (HA+IR) and vice versa (IR+HA). According to the results, the highest effective moisture diffusion coefficient of the two Crank and Dincer models was equal to 1.49 × 10<sup>−9</sup> and 1.55 × 10<sup>−8</sup> m<sup>2</sup>/s, obtained in the HA70–IR750, and the lowest effective moisture diffusion coefficient was equal to 1.8 × 10<sup>−10</sup> and 2.54 × 10<sup>−9</sup> m<sup>2</sup>/s, obtained in IR250+HA40. The maximum (10.25%) and minimum (3.61%) energy efficiency were in the IR750 and HA55–IR250 methods, respectively. Moreover, the highest drying efficiency (12.71%) and the lowest drying efficiency (4.19%) were obtained in HA70+IR500 and HA40–IR250, respectively. The value of specific energy consumption was 15.42–51.03 (kWh/kg), the diffusion activation energy was 18.43–35.43 (kJ/mol), and the value of the specific moisture extraction rate (SMER) was in the range of 0.019–0.054 (kWh/kg). Compared to the other strategies, the second strategy (HA–IR) was better in terms of drying time and mass transfer, and the third strategy (HA+IR) was more efficient in terms of energy efficiency and drying efficiency. The infrared drying in the first strategy was better than that in the other methods in the other strategies in terms of retention of bioactive compounds.
ISSN:2076-3417