| Summary: | This paper proposes the systemic dynamic modeling and analysis of a 2PRU-UPR parallel robot with two rotations and one translation based on screw theory, where P, R and U denote prismatic, revolute and universal joints, respectively. Compared with existing parallel robots having two rotations and one translation, the two actuated prismatic joints of the 2PRU-UPR parallel robot are mounted on a fixed base to reduce the movable mass and improve the dynamic response. First, the inverse kinematics are presented. Next, adopting the screw-based method, the velocity and acceleration of joints and limbs of the 2PRU-UPR parallel robot are analyzed in detail. The actuated forces of the three actuators are then obtained according to the principle of virtual work. Additionally, a numerical simulation is conducted using ADAMS software to investigate the dynamic model of the 2PRU-UPR manipulator and to verify the correctness of the theoretical results. Finally, distributions of the dynamic manipulability ellipsoid index are used to evaluate the dynamic translational and rotational performances of the 2PRU-UPR parallel robot. A prototype based on the dynamic analysis has been fabricated. The dynamic modeling and evaluation provide a basis for the efficient and precise control of the 2PRU-UPR parallel robot in actual machining manipulations. The 2PRU-UPR parallel robot has great potential in machining workpieces with curved surfaces.
|
|---|