Sinterable powders from laser driven reactions : final report

Sinterable powders from laser driven reactions : final report

Extremely fine, uniform ceramic powders have been synthesized from Sil4 NH3 and C2H4 gas phase reactants that are heated by absorbing optical energy emitted from a C02 laser. Resulting Si, Si3N4 and SiC powders have been characterized in terms of parameters which are important for densification proc...

Πλήρης περιγραφή

Λεπτομέρειες βιβλιογραφικής εγγραφής
Κύριος συγγραφέας:	Haggerty, John Scarseth
Έκδοση:	Cambridge, Mass. : Massachusetts Institute of Technology, Energy Laboratory, 1981 2011
Διαθέσιμο Online:	http://hdl.handle.net/1721.1/60500

Παρόμοια τεκμήρια

Sinterable powders from laser driven reactions : annual report
ανά: Haggerty, John S., κ.ά.
Έκδοση: (2006)

Sinterable ceramic powders from laser heated gas phase reactions and rapidly solidified ceramic materials : annual report.
ανά: Haggerty, John Scarseth
Έκδοση: (2011)

Sinterable powders from laser driven reactions : annual report
ανά: Haggerty, John S., κ.ά.
Έκδοση: (2006)

Sinterable ceramic powders from laser-heated gases
ανά: Haggerty, John S.
Έκδοση: (2005)

Graded index antireflective coatings for glass : final report, September 1978 - February 1982
ανά: Haggerty, John Scarseth
Έκδοση: (2011)

Annual report, April 1981 - May 1982 : laser induced deposition of thin films
ανά: Gattuso, Todd Richard, κ.ά.
Έκδοση: (2011)

Sinterable ceramic powders from laser-heated gases
Έκδοση: (2005)

Thermal expansion, heat capacity and structural relaxation measurements in the glass transition region.
ανά: Haggerty, John Scarseth
Έκδοση: (2005)

Improvement of powder management and recycling in laser sintering
ανά: Wan Yusoff, Wan Ahmad Yusmawiza, κ.ά.
Έκδοση: (2011)

Development and optimization of polypropylene-based powders for selective laser sintering
ανά: Tan, Lisa Jiaying
Έκδοση: (2021)

Development of carbon-based polymer nanocomposite powder for selective laser sintering
ανά: Sim, Derek Jia Shu
Έκδοση: (2015)

Development of organically modified montmorillonite/polypropylene composite powders for selective laser sintering
ανά: Tan, Lisa Jiaying, κ.ά.
Έκδοση: (2020)

Development of Aluminium Oxide/polyamide 12 composite powders for direct laser sintering
ανά: Koh, Wee Kiat
Έκδοση: (2018)

Effect of powder calcination on the sintering of hydroxyapatite
ανά: Tan, C.Y., κ.ά.
Έκδοση: (2008)

Constitutive modelling of powder compaction and sintering
ανά: Cocks, A
Έκδοση: (2001)

Densification of metal powder during sintering/
ανά: 385971 Invensen, V.
Έκδοση: (1973)

Machining of sintered powder metallurgy materials /
ανά: 335741 Ong, Chin Heng
Έκδοση: (2003)

AFinite Element Model For A Selective Laser Sintering of A Polycarbonate Powder Block
ανά: Perpustakaan UGM, i-lib
Έκδοση: (1997)

Effects of powder synthesis method on the sinterability of hydroxyapatite
ανά: K. L., Aw, κ.ά.
Έκδοση: (2011)

Machining of sintered powder metallurgy materials [microfilm] /
ανά: Ong, Chin Heng
Έκδοση: (2003)

Spark plasma reaction sintering of ZrO2-mullite composites from plasma spheroidized zircon/alumina powders
ανά: Yu, L. G., κ.ά.
Έκδοση: (2012)

Investigation of sintered powder electrodes in electrical discharge machining,
ανά: Giddens, William E. (William Edgar)
Έκδοση: (2011)

Evaluation of spark plasma sintered (SPS) hydroxyapatite powders
ανά: Chow, Vicky Yuen San.
Έκδοση: (2008)

Controlled nucleation and growth process for large grained polycrystalline silicon photovoltaics
ανά: Danforth, Stephen C., κ.ά.
Έκδοση: (2011)

PA12 nylon dust reduction of selective laser sintering reprocessing by optimization of refresh rate and powder handling
ανά: Muhamad Damanhuri, Amir Abdullah
Έκδοση: (2021)

PA12 nylon dust reduction of selective laser sintering reprocessing by optimization of refresh rate and powder handling
ανά: Ali Detho, Amir
Έκδοση: (2021)

The effect of powder sintering method on the densification and microstructure of pewter alloys
ανά: Mohamed Ariff, Tasnim Firdaus, κ.ά.
Έκδοση: (2009)

Sintering properties of hydroxyapatite powders prepared using different methods
ανά: Ramesh, S., κ.ά.
Έκδοση: (2012)

Physicochemical properties of hydroxyapatite/montmorillonite nanocomposite prepared by powder sintering
ανά: Nawang, Rosnah, κ.ά.
Έκδοση: (2019)

Spark-plasma-sintering (SPS) of nanostructured titanium carbonitride powders
ανά: Angerer, P., κ.ά.
Έκδοση: (2012)

Towards binder jetting and sintering of AZ91 magnesium powder
ανά: Salehi, Mojtaba, κ.ά.
Έκδοση: (2023)

Data-driven optimization of OFDA's disaster response capacity: Final Report
ανά: Goentzel, Jarrod, κ.ά.
Έκδοση: (2021)

Selective laser sintering of polymer nanocomposites
ανά: Wahab, Md Saidin
Έκδοση: (2008)

Oriented structure of short fiber reinforced polymer composites processed by selective laser sintering : the role of powder-spreading process
ανά: Chen, Hui, κ.ά.
Έκδοση: (2021)

Final report
ανά: Regional Seminar on Computers in Education Project (1986 : Pulau Pinang)
Έκδοση: (1987)

Final report
ανά: Subregional Traninig Workshop on Nonformal Environmental Education For Asia (1985 : Serdang)
Έκδοση: ([19-)

Final report
ανά: International Co-ordinating Council of the Programme on Man and the Biosphere (MAB), (1971 Paris)
Έκδοση: (1972)

Final Report
ανά: Expert Panel on the Role of Systems analysis and Modelling Approaches in the Programme on Man and the Biosphere (MAB), (1972 Paris), κ.ά.
Έκδοση: (1972)

Final Report
ανά: Expert panel on Project no1:Ecological Effects of Increasing Human Activities on Tropical and Sub-tropical Forest Ecosys (1972 Paris), κ.ά.
Έκδοση: (1972)

Final report
ανά: 478509 Asian Regional Seminar on the Promotion of Public Understanding of Science and Technology, Manila, 25th Sept.-2nd Oct. 1972, κ.ά.
Έκδοση: (1972)