Quasi-static thermal modelling of multi-scale sliding contact for unlubricated brush seal materials

Quasi-static thermal modelling of multi-scale sliding contact for unlubricated brush seal materials

Veure altres versions (1)

Prediction of the contact temperature between two materials in high speed rubbing contact is essential when analysing the wear mechanism and modelling wear rate for unlubricated contact. Conventionally the assumptions used for a pin-on-disc configuration are either a steady heat source at the contac...

Descripció completa

Dades bibliogràfiques
Autors principals:	Xia, Q, Gillespie, D, Owen, A, Franceschini, G
Format:	Conference item
Publicat:	American Society of Mechanical Engineers 2018

Ítems similars

Quasi-static thermal modelling of multi-scale sliding contact for unlubricated brush seal materials
per: Xia, Q, et al.
Publicat: (2019)

Effect of sliding speed and counterface properties on the tribo-oxidation of brush seal material under dry sliding conditions
per: Thakare, MR, et al.
Publicat: (2013)

A Static Friction Model for Unlubricated Contact of Random Rough Surfaces at Micro/Nano Scale
per: Shengguang Zhu, et al.
Publicat: (2021-03-01)

An investigation of flow, mechanical, and thermal performance of conventional and pressure-balanced brush seals
per: Pekris, M, et al.
Publicat: (2014)

A slow-speed rotating test facility for characterising the stiffness of brush seals
per: Franceschini, G, et al.
Publicat: (2006)

Brush seal contact force theory and correlation with tests
per: Ertuğrul Tolga Duran
Publicat: (2022-04-01)

Calculation and AFM Experimental Research on Slip Friction for Unlubricated Spherical Contact with Roughness Effect
per: Shengguang Zhu, et al.
Publicat: (2021-11-01)

Evaluation of gold extrusion proces with almost unlubricated condition /
per: Ahmad Haqkim Muhamad Malack, 1992-, et al.
Publicat: (2015)

Rotating Brush Seal
per: S. B. Lattime, et al.
Publicat: (2002-01-01)

Rotating Brush Seal
per: Lattime S. B., et al.
Publicat: (2002-01-01)

Brush Seal Performance with Ideal Gas Working Fluid under Static Rotor Condition
per: Altyib Abdallah Mahmoud Ahmed, et al.
Publicat: (2024-07-01)

Evaluation of gold extrusion proces with almost unlubricated conditio [electroni resource] /
per: Ahmad Haqkim Muhamad Malack, 1992-, et al.
Publicat: (2015)

The effects of external loading on low displacement wear rates of unlubricated steels
per: Blades, L, et al.
Publicat: (2021)

The analysis of wear intensity of lubricated and unlubricated locomotive wheel sets flanges
per: Å arÅ«nas MikaliÅ«nas, et al.
Publicat: (2004-02-01)

Modelling bristle bending in brush seals
per: Howell, P, et al.
Publicat: (1999)

Quasi-Static Sliding Wear Analysis of 3D Rough Surface Considering Changes in the Point of Contact
per: Yunji Kim, et al.
Publicat: (2022-12-01)

Bidirectional Brush Seals – Post-Test Analysis
per: Robert C. Hendricks, et al.
Publicat: (1999-01-01)

A Brush Seals Program Modeling and Developments
per: Robert C. Hendricks, et al.
Publicat: (1998-01-01)

Improved understanding of stiffness in leaf-type filament seals
per: Jahn, I, et al.
Publicat: (2015)

Numerical Simulation of Static Seal Contact Mechanics Including Hydrostatic Load at the Contacting Interface
per: De Huang, et al.
Publicat: (2020-12-01)

Static Characteristics of Finger Seal considering Contact between Fingers and Rotor
per: Sai Zhang, et al.
Publicat: (2022-01-01)

Adhesive contact of rough brushes
per: Qiang Li, et al.
Publicat: (2018-09-01)

Analytical modeling and experimental validation of heating at the leaf seal/rotor interface
per: Pekris, M, et al.
Publicat: (2016)

Analytical modeling and experimental validation of heating at the leaf seal/rotor interface
per: Gillespie, D, et al.
Publicat: (2016)

Improved Understanding of Blow-Down in Filament Seals
per: Franceschini, G, et al.
Publicat: (2010)

EXPERIMENTAL CHARACTERISATION OF THE STIFFNESS AND LEAKAGE OF A PROTOTYPE LEAF SEAL FOR TURBINE APPLICATIONS
per: Jahn, I, et al.
Publicat: (2008)

Analysis of Brush Seal Interaction with Steam Turbine Rotor-Shafts
per: Nonso Omenife, et al.
Publicat: (2024-01-01)

Retraction Note: Friction and wear of polystyrene crystal sliding against steel 100Cr6 in unlubricated contact (PCSS: (2022), 23(2), (293-301), https://doi.org/10.15330/pcss.23.2.293-301)
per: Soufyane Aounallah, et al.
Publicat: (2022-05-01)

IMPROVED UNDERSTANDING OF BLOW-DOWN IN FILAMENT SEALS
per: Franceschini, G, et al.
Publicat: (2008)

Features of the Calculated Determination of the Thermal State of the Turbo Generator Brush-Contact Device
per: Anton Ye. Kovryha
Publicat: (2024-12-01)

Planning, Sensing, and Control for Contact-rich Robotic Manipulation with Quasi-static Contact Models
per: Pang, Tao
Publicat: (2023)

Modeling of Contact Forces for Brushing Tools
per: Eckart Uhlmann, et al.
Publicat: (2021-07-01)

Wear and Leakage Behaviors of Brush Seal Considering Eccentricity and Radial Deformation
per: Yiren Xu, et al.
Publicat: (2023-04-01)

Theoretical and numerical investigation into brush seal hysteresis without pressure differential
per: Yuchi Kang, et al.
Publicat: (2019-11-01)

Quasi-static analysis and modeling for micro ohmic contacts in MEMS switches
per: See, Raymond Seng Hong.
Publicat: (2011)

Efficient numerical methods to approach solutions of quasi-static contact problems
per: Lionel Ouya Ndjansi, et al.
Publicat: (2025-02-01)

Study of Frictional Effects of Granite Subjected to Quasi-Static Contact Loading
per: Hossein Shariati, et al.
Publicat: (2020-12-01)

Semi-analytical methodology for fretting wear evaluation of unlubricated pitch bearing raceways under operative and non-operative periods
per: D. Cubillas, et al.
Publicat: (2025-02-01)

CONTACT STRENGTH ANALYSIS OF FINGER SEAL CONSIDERING THERMAL EFFECT
per: ZHANG YanChao, et al.
Publicat: (2019-01-01)

Thermal–Structural Coupling Analysis of Subsea Connector Sealing Contact
per: Feihong Yun, et al.
Publicat: (2022-03-01)