An evaluation of creep rupture strength of ferritic/austenitic dissimilar weld interfaces using cohesive zone modelling

An evaluation of creep rupture strength of ferritic/austenitic dissimilar weld interfaces using cohesive zone modelling

Dissimilar metal welds between ferritic and austenitic alloys are used extensively in power generation plants. Failure of such welds can occur in the base metal, the heat-affected zone (HAZ), or the interface between the two materials, depending on the operating stress and temperature. Evaluation of...

Fuld beskrivelse

Bibliografiske detaljer
Main Authors:	Hu, J, Fukahori, T, Igari, T, Chuman, Y, Cocks, ACF
Format:	Conference item
Sprog:	English
Udgivet:	Elsevier 2016

Lignende værker

Modelling of creep rupture of ferritic/austenitic dissimilar weld interfaces under mode I fracture
af: Hu, J, et al.
Udgivet: (2018)

Effect of weld angle on the creep rupture life of ferritic/austenitic dissimilar weld interfaces under remote mode I fracture
af: Hu, J, et al.
Udgivet: (2019)

Creep damage analysis of mod.9Cr-1Mo steel welds considering void mechanics modeling
af: Honda, T, et al.
Udgivet: (2020)

Type IV creep crack initiation and propagation in mod.9Cr-1Mo steel welds
af: Honda, T, et al.
Udgivet: (2022)

A Review on Fusion Welding of Dissimilar Ferritic/Austenitic Steels: Processing and Weld Zone Metallurgy
af: Fabio Giudice, et al.
Udgivet: (2024-05-01)

Effect of Interface Form on Creep Failure and Life of Dissimilar Metal Welds Involving Nickel-Based Weld Metal and Ferritic Base Metal
af: Xiaogang Li, et al.
Udgivet: (2024-03-01)

Creep damage analysis of simulated-HAZ notched bar specimens of modified 9Cr-1Mo steel
af: Takashi HONDA, et al.
Udgivet: (2017-08-01)

Effect of Thermal Ageing at 400 °C on the Microstructure of Ferrite-Austenite Interface of Nickel-Base Alloy Narrow-Gap Dissimilar Metal Weld
af: Matias Ahonen, et al.
Udgivet: (2020-03-01)

A theoretical and computational investigation of mixed mode creep crack growth along an interface
af: Elmukashfi, E, et al.
Udgivet: (2021)

Enhancing Welding Productivity and Mitigation of Distortion in Dissimilar Welding of Ferritic-Martensitic Steel and Austenitic Stainless Steel Using Robotic A-TIG Welding Process
af: Tushar Sonar, et al.
Udgivet: (2024-12-01)

Corrosion of an austenite and ferrite stainless steel weld
af: BRANIMIR N. GRGUR, et al.
Udgivet: (2011-07-01)

Dissimilar Welding of Thick Ferritic/Austenitic Steels Plates Using Two Simultaneous Laser Beams in a Single Pass
af: Fabio Giudice, et al.
Udgivet: (2024-06-01)

Failure Analysis of Dissimilar Metal Welds between Ferritic Heat Resistant Steels and Austenitic Stainless Steels in Power Plant
af: Xiaogang Li, et al.
Udgivet: (2024-07-01)

Optimization of parameters in rotary friction welding process of dissimilar austenitic and ferritic stainless steel using finite element analysis
af: Anas Abid Mattie, et al.
Udgivet: (2023-07-01)

Tensile properties of shielded metal arc welded dissimilar joints of nuclear grade ferritic steel and austenitic stainless steel
af: Karthick K., et al.
Udgivet: (2016-12-01)

Modeling of welding residual stress in a dissimilar metal butt-welded joint between P92 ferritic steel and SUS304 austenitic stainless steel
af: Suo Li, et al.
Udgivet: (2023-03-01)

Effect of microstructure on tensile properties of austenite-ferrite welded joint
af: R. Bakić, et al.
Udgivet: (2015-04-01)

Dramatically enhanced creep rupture performance and failure analysis of 9Cr–CrMoV dissimilar welded joint
af: Kai Ding, et al.
Udgivet: (2022-05-01)

Structural relationships of metallurgical and mechanical properties influenced by Ni-based fillers on Gas Tungsten Arc Welded Ferritic /Austenitic SS dissimilar joints
af: Sengottaiyan PORCHILAMBAN, et al.
Udgivet: (2019-03-01)

The Influence of Groove Geometry on the Creep Fracture Behavior of Dissimilar Metal Welds between Ferritic Heat-Resistant Steels and Nickel-Based Alloys
af: Tengfei Zhang, et al.
Udgivet: (2024-03-01)

Effect of creep on the Bauschinger effect in a polycrystalline austenitic stainless steel
af: Hu, J, et al.
Udgivet: (2016)

INTERFACE REACTION CONTROLLED CREEP
af: Cocks, A
Udgivet: (1992)

Numerical Simulation of Laser Welding Dissimilar Low Carbon and Austenitic Steel Joint
af: Danielewski Hubert, et al.
Udgivet: (2020-06-01)

GMAW dissimilar welding of AISI 409 ferritic stainless steel to AISI 316L austenitic stainless steel by using AISI 308 filler wire
af: Nabendu Ghosh, et al.
Udgivet: (2017-08-01)

Parametric studies of dissimilar welding of AISI 409 ferritic stainless steel to AISI 316L austenitic stainless steel using Taguchi desirability analyses
af: Ghosh Nabendu, et al.
Udgivet: (2018-06-01)

Influence of heat input on the tensile properties of austenitic-ferritic welded joints
af: Aleksandar G. Bukvić, et al.
Udgivet: (2022-04-01)

Influence of thermal ageing on creep rupture mechanism and creep life of P92 ferritic steel
af: Hui Kang, et al.
Udgivet: (2020-01-01)

Experimental and numerical study of dissimilar fiber laser welding of martensitic AISI 1060 carbon steel with different configuration with austenitic 304 and ferritic 420 stainless steel
af: Akbar Zarei, et al.
Udgivet: (2024-11-01)

Finite element modelling of transient behaviours and microstructural evolution during dissimilar rotary friction welding of 316 austenitic stainless steel to A516 ferritic steel
af: Amborish Banerjee, et al.
Udgivet: (2023-11-01)

CREEP-RUPTURE OF SHELL STRUCTURES SUBJECTED TO CYCLIC LOADING
af: Cocks, A, et al.
Udgivet: (1988)

Features of Acoustic Emission in Tensile Testing of Dissimilar Welded Joints of Pearlitic and Austenitic Steels
af: Vera Barat, et al.
Udgivet: (2021-12-01)

Dissimilar Welding of Austenitic and Martensitic Stainless Steel Joints for Nuclear Applications: a review
af: Sravan Sashank S., et al.
Udgivet: (2021-01-01)

HCF Failure Modes and Mechanisms of Dissimilar Welds of Martensite/Austenite Metals at Elevated Temperature
af: Shao Chendong, et al.
Udgivet: (2019-01-01)

The influence of the heat treatment on delta ferrite transformation in austenitic stainless steel welds
af: B. Mateša, et al.
Udgivet: (2012-04-01)

Insights on microstructure evolution of austenite welded joints subjected to creep-fatigue loading
af: Cong Li, et al.
Udgivet: (2024-05-01)

Creep-plasticity-fatigue calculations in the design of porous double layers for new transpiration cooling systems
af: Skamniotis, CG, et al.
Udgivet: (2021)

Ratchetting and creep failure in twin-wall turbine blades experiencing severe thermal and centrifugal loading
af: Skamniotis, C, et al.
Udgivet: (2022)

Dislocation dynamics modelling of the creep behaviour of particle-strengthened materials
af: Liu, FX, et al.
Udgivet: (2021)

Machine learning augmented predictive and generative model for rupture life in ferritic and austenitic steels
af: Osman Mamun, et al.
Udgivet: (2021-04-01)

Evaluating creep rupture life in austenitic and martensitic steels with soft-constrained machine learning
af: Jun-Jing He, et al.
Udgivet: (2023-11-01)