Detailed heat transfer measurements in a model of an integrally cast cooling passage

Detailed heat transfer measurements in a model of an integrally cast cooling passage

Veure altres versions (1)

Detailed measurements of the heat transfer coefficient distributions on the internal surfaces of a novel gas turbine blade cooling configuration were carried out using a transient liquid crystal technique. The cooling geometry, in which a series of racetrack passages are connected to a central plenu...

Descripció completa

Dades bibliogràfiques
Autors principals:	Ieronymidis, I, Gillespie, D, Ireland, P, Kingston, R, ASME
Format:	Conference item
Publicat:	2006

Ítems similars

Detailed Heat Transfer Measurements in a Model of an Integrally Cast Cooling Passage
per: Ieronymidis, I, et al.
Publicat: (2010)

The use of high blockage ribs to enhance heat transfer coefficient distributions in a model of an integrally cast cooling manifold
per: Ieronymidis, I, et al.
Publicat: (2006)

Experimental and computational flow field studies of an integrally cast cooling manifold with and without rotation
per: Ieronymidis, I, et al.
Publicat: (2006)

Measurement of heat transfer coefficient distributions and flow field in a model of a turbine blade cooling passage with tangential injection
per: Ling, J, et al.
Publicat: (2006)

Full surface local heat transfer coefficient measurements in a model of an integrally cast impingement cooling geometry
per: Gillespie, D, et al.
Publicat: (1998)

Full surface local heat transfer coefficient measurements in a model of an integrally cast impingement cooling geometry
per: Gillespie, D, et al.
Publicat: (1996)

DETAILED MEASUREMENTS OF HEAT TRANSFER ON AND AROUND A PEDESTAL IN FULLY DEVELOPED PASSAGE FLOW.
per: Ireland, P, et al.
Publicat: (1986)

Detailed measurements of local heat transfer coefficient in the entrance to normal and inclined film cooling holes
per: Gillespie, D, et al.
Publicat: (1996)

Detailed measurements of local heat transfer coefficient in the entrance to normal and inclined film cooling holes
per: Gillespie, D, et al.
Publicat: (1994)

Heat transfer measurements to a gas turbine cooling passage with inclined ribs
per: Wang, Z, et al.
Publicat: (1998)

Heat transfer measurements to a gas turbine cooling passage with inclined ribs
per: Wang, Z, et al.
Publicat: (1996)

The effect of roughness element fillet radii on the heat transfer enhancement in an impingement cooling system
per: Son, C, et al.
Publicat: (2005)

Local heat transfer coefficient measurements on an engine-representative internal cooling passage
per: Ryley, JR, et al.
Publicat: (2018)

An investigation of the application of roughness elements to enhance heat transfer in an impingement cooling system
per: Son, C, et al.
Publicat: (2005)

DETAILED HEAT TRANSFER MEASUREMENTS NEAR AND WITHIN THE ENTRANCE OF A FILM COOLING HOLE.
per: Byerley, A, et al.
Publicat: (1988)

Gas temperature measurement in internal cooling passages
per: Wang, Z, et al.
Publicat: (1996)

Computational and experimental study of heat transfer in rotating ribbed radial turbine cooling passages
per: Pearce, R, et al.
Publicat: (2015)

A transient calorimeter technique for determining regional heat transfer coefficients in the three-temperature flowfield at a turbine airfoil leading edge
per: Nowlin, SR, et al.
Publicat: (2005)

Numerical modelling techniques for turbine blade internal cooling passages
per: Dhopade, P, et al.
Publicat: (2015)

Complementary velocity and heat transfer measurements in a rotating turbine cooling passage
per: Bons, Jeffrey Peter, 1964-
Publicat: (2005)

Heat transfer enhancement within a turbine blade cooling passage using ribs and combinations of ribs with film cooling holes
per: Shen, JR, et al.
Publicat: (1996)

Numerical Study Of Heat Transfer In Cooling Passages Of Turbine Blade
per: Ahmed F. Khudheyer, et al.
Publicat: (2023-05-01)

Heat transfer and flow characteristics of an engine representative impingement cooling system
per: Son, C, et al.
Publicat: (2001)

Secondary flow and heat transfer coefficient distributions in the developing flow region of ribbed turbine blade cooling passages
per: Forsyth, P, et al.
Publicat: (2016)

An experimental and computational parametric investigation of flow conditions in intersecting circular passages
per: Nowlin, SR, et al.
Publicat: (2007)

Computational study of the effect of inlet velocity profile and rib orientation on heat transfer in rotating ribbed radial turbine cooling passages
per: Pearce, R, et al.
Publicat: (2016)

Enhancement of impingement cooling in a high cross flow channel using shaped impingement cooling holes
per: Chambers, A, et al.
Publicat: (2006)

Validation of the Transient Liquid Crystal Thermography Technique for Heat Transfer Measurements on a Rotating Cooling Passage
per: Andrea Lorenzon, et al.
Publicat: (2020-09-01)

Forced convective heat transfer to supercritical water in micro-rocket cooling passages
per: Faust, Adriane (Adriane Jean), 1976-
Publicat: (2005)

Heat transfer characteristics of an impingement plate used in a turbine vane cooling system
per: Son, C, et al.
Publicat: (2001)

Detailed heat transfer coefficient measurements and thermal analysis at engine conditions of a pedestal with fillet radii
per: Wang, Z, et al.
Publicat: (1993)

Detailed heat transfer coefficient measurements and thermal analysis at engine conditions of a pedestal with fillet radii
per: Wang, Z, et al.
Publicat: (1995)

Enhancement of Impingement Cooling in a High Cross Flow Channel Using Shaped Impingement Cooling Holes
per: Chambers, A, et al.
Publicat: (2010)

Techniques for detailed heat transfer measurements in cold supersonic blowdown tunnels using thermochromic liquid crystals
per: Mee, D, et al.
Publicat: (2002)

Effects of mist fractions on heat transfer characteristics in a rotating roughened cooling passage
per: Hamad M. Alhajeri, et al.
Publicat: (2019-09-01)

Heat transfer in rotating passages
per: Govatzidakis, George John
Publicat: (2009)

U-bend shaped turbine blade cooling passage optimization
per: Namgoong, H, et al.
Publicat: (2008)

Turbulent heat transfer measurements using liquid crystals
per: Ireland, P, et al.
Publicat: (1999)

Detailed measurements of local heat transfer coefficient and adiabatic wall temperature beneath an array of impinging jets
per: Van Treuren, K, et al.
Publicat: (1993)

Detailed measurements of local heat transfer coefficient and adiabatic wall temperature beneath an array of impinging jets
per: Van Treuren, K, et al.
Publicat: (1994)