Continuum modeling of {101̄2} twinning in a Mg-3%Al-1%Zn rolled sheet

Continuum modeling of {101̄2} twinning in a Mg-3%Al-1%Zn rolled sheet

A crystal plasticity continuum model with differentiated self- and cross-hardening mechanisms for twin and slip systems has been utilized to predict the slip/twin activities and texture evolution in a rolled and annealed Mg-3%Al-1%Zn sheet compressed along the rolling direction (RD) and tensile test...

Cur síos iomlán

Sonraí bibleagrafaíochta
Príomhchruthaitheoirí:	Jérusalem, A, Fernández, A, Pérez-Prado, M
Formáid:	Journal article
Teanga:	English
Foilsithe / Cruthaithe:	2010

Míreanna comhchosúla

Continuum modeling of the response of a Mg alloy AZ31 rolled sheet during uniaxial deformation
de réir: Fernández, A, et al.
Foilsithe / Cruthaithe: (2011)

Effects of Zn Addition and Twin Roll Casting Process on the Microstructure, Texture, and Mechanical Properties of the Mg-Al-Mn-Ca Sheet
de réir: Donghwan Eom, et al.
Foilsithe / Cruthaithe: (2024-02-01)

Modelización delmaclado {10Ῑ2} de una chapa laminada de Mg-3%Al-1%Zn
de réir: A. Jérusalem, et al.
Foilsithe / Cruthaithe: (2010-12-01)

On the strengthening and slip activity of Mg-3Al-1Zn alloy with pre-induced {101¯2} twins
de réir: Jie Kuang, et al.
Foilsithe / Cruthaithe: (2023-04-01)

Influence of vortex effect on the central segregation defects of horizontal twin-roll casting Al–Mg–Mn–Zn–Cu–Cr alloy sheet
de réir: Jinyu Fu, et al.
Foilsithe / Cruthaithe: (2022-07-01)

{101¯2} twin–twin intersection-induced lattice rotation and dynamic recrystallization in Mg–6Al–3Sn–2Zn alloy
de réir: Bin-Jiang Lv, et al.
Foilsithe / Cruthaithe: (2024-04-01)

Relieving segregation in twin-roll cast Mg–8Al–2Sn–1Zn alloys via controlled rolling
de réir: Shao-You Zhang, et al.
Foilsithe / Cruthaithe: (2021-01-01)

Microstructure and mechanical properties of high-strength Al–Zn–Mg–Ni alloys with excellent twin-roll castability
de réir: Dae-Han Jeong, et al.
Foilsithe / Cruthaithe: (2024-11-01)

Adsorption of SF6 Decomposed Products over ZnO(101̅0): Effects of O and Zn Vacancies
de réir: Dachang Chen, et al.
Foilsithe / Cruthaithe: (2018-12-01)

Effect of twinning and Al–Nd phase on dynamic recrystallization in rolled Mg–Al–Zn–Nd alloy at the moderate strain rate
de réir: Xiaoming Cui, et al.
Foilsithe / Cruthaithe: (2021-01-01)

Analysis of defects in a twin roll cast Mg‐Y‐Zn magnesium alloy
de réir: Kristina Kittner, et al.
Foilsithe / Cruthaithe: (2022-07-01)

A new strain rate dependent continuum framework for Mg alloys
de réir: Garcia-Grajales, J, et al.
Foilsithe / Cruthaithe: (2016)

Enhanced formability of Al–Mg–Si–Zn alloy sheet via dislocation structure and texture during cold rolling
de réir: Kai-Xin Chen, et al.
Foilsithe / Cruthaithe: (2024-01-01)

Effect of low cast-rolling speeds on the microstructure and mechanical properties of twin-roll casting high Mg AA5059 alloy sheets
de réir: Jinyu Fu, et al.
Foilsithe / Cruthaithe: (2022-07-01)

An atomistic study of Y segregation at a {101¯1}–{101¯2} double twin in Mg
de réir: Naoki Miyazawa, et al.
Foilsithe / Cruthaithe: (2017-03-01)

Novel twin-roll-cast Ti/Al clad sheets with excellent tensile properties
de réir: Dae Woong Kim, et al.
Foilsithe / Cruthaithe: (2017-08-01)

Cold Formability of Twin-Roll Cast, Rolled and Annealed Mg Strips
de réir: Madlen Ullmann, et al.
Foilsithe / Cruthaithe: (2024-01-01)

Microstructure and Mechanical Properties of Severely Deformed Mg-4.5Al-1.0Zn Alloy Processed by Asymmetric Rolling on Ingot and Twin Roll Cast Strip
de réir: Liting Luo, et al.
Foilsithe / Cruthaithe: (2016-02-01)

Warm-forming of pre-aged Al-Zn-Mg-Cu alloy sheet
de réir: Johannes A. Österreicher, et al.
Foilsithe / Cruthaithe: (2020-08-01)

Effects of strain path on the microstructure, tensile properties, and formability of Al/Mg roll-bonded sheets
de réir: A. Rouzbeh, et al.
Foilsithe / Cruthaithe: (2023-03-01)

High-Speed and Low-Load Twin-Roll Casting of Al–5%Mg Strip
de réir: Kazuki Yamazaki, et al.
Foilsithe / Cruthaithe: (2022-12-01)

Mechanical Properties and Bonding Mechanism of the Mg/Al Clad Sheet Manufactured by the Corrugated Roll
de réir: Shi Zhao, et al.
Foilsithe / Cruthaithe: (2023-03-01)

Effect of Lean Alloyed Al and Ca on the Texture Development of Cold Rolled Mg Sheets
de réir: Wassilios J. Delis, et al.
Foilsithe / Cruthaithe: (2023-04-01)

First-principles study on the segregation behavior of solute atoms at {101¯2} and {101¯1} twin boundaries of Mg
de réir: Hong Ju, et al.
Foilsithe / Cruthaithe: (2023-05-01)

Strength and ductility with {10͞11} — {10͞12} double twinning in a magnesium alloy
de réir: M. Lentz, et al.
Foilsithe / Cruthaithe: (2016-04-01)

Development of Mg–6Al–4Sn–1Zn alloy sheets with ultra-high strength by combining extrusion and high-speed rolling
de réir: Tingliang Yan, et al.
Foilsithe / Cruthaithe: (2024-03-01)

Towards directly formable thin gauge AZ31 Mg alloy sheet production by melt conditioned twin roll casting
de réir: Xinliang Yang, et al.
Foilsithe / Cruthaithe: (2019-10-01)

Preparation and Characterization of Mg-RE Alloy Sheets and Formation of Amorphous/Crystalline Composites by Twin Roll Casting for Biomedical Implant Application
de réir: Haijian Wang, et al.
Foilsithe / Cruthaithe: (2019-10-01)

Improvement of strength and ductility synergy in a room-temperature stretch-formable Mg-Al-Mn alloy sheet by twin-roll casting and low-temperature annealing
de réir: T. Nakata, et al.
Foilsithe / Cruthaithe: (2022-04-01)

Effect of 1wt.%Bi addition on microstructure and mechanical property of Mg–3Al alloy by twin roll casting and hot rolling
de réir: Hui Yu, et al.
Foilsithe / Cruthaithe: (2023-05-01)

Dynamic precipitation and twinning-induced dynamic recrystallization in Mg–6Al–3Sn–1Zn alloy during multi-pass high-speed rolling
de réir: Di Pei, et al.
Foilsithe / Cruthaithe: (2024-05-01)

Effects of layer thickness ratio on the bendability of Mg-Al-Zn/Mg-Gd laminated composite sheet
de réir: Shengwen Bai, et al.
Foilsithe / Cruthaithe: (2022-11-01)

Improved cryogenic properties of the Al-xMg alloys enabled by twin-roll strip casting
de réir: Jun-Hyoung Park, et al.
Foilsithe / Cruthaithe: (2021-07-01)

Effect of Warm Rolling on Microstructure and Mechanical Properties of Twin-roll Casted ZK60 Alloy Sheets
de réir: Xibing Gong, et al.
Foilsithe / Cruthaithe: (2015-04-01)

{101¯2} twinning mechanism during in situ micro-tensile loading of pure Mg: Role of basal slip and twin-twin interactions
de réir: Nicolò M. Della Ventura, et al.
Foilsithe / Cruthaithe: (2021-01-01)

Hot Rolling of the Twin-Roll Cast and Homogenized Mg-6.8Y-2.5Zn (WZ73) Magnesium Alloy Containing LPSO Structures
de réir: Madlen Ullmann, et al.
Foilsithe / Cruthaithe: (2021-11-01)

Grain Refinement by Extension Twin in Mg Alloy during Asymmetrical Rolling
de réir: I Putu Widiantara, et al.
Foilsithe / Cruthaithe: (2018-11-01)

Microstructure and mechanical properties of high-manganese-containing high-speed twin-roll cast Al-Mn-Si alloy strips and their cold-rolled sheets
de réir: Nguyen T.Ha, et al.
Foilsithe / Cruthaithe: (2020-01-01)

Effect of Mg and Si contents and TiC nanoparticles on the center segregation susceptibility of twin-roll cast Al–Mg–Si alloys
de réir: Bao Wang, et al.
Foilsithe / Cruthaithe: (2023-07-01)

Superplasticity in a rolled Mg–3Al–1Zn alloy by two-stage deformation method
de réir: Tan, J, et al.
Foilsithe / Cruthaithe: (2002)