APC3-A charge sampling, storage and readout chip for silicon detector readout

APC3-A charge sampling, storage and readout chip for silicon detector readout

Ցույց տալ այլ տարբերակներ (2)

The 'APC3' is a charge sampling and storage chip designed for high speed readout of silicon detectors. It has 32 channels, each with pre-amplifier, integrator and storage capacitors. Current from a silicon detector connected to the input is integrated as a charge and stored on a capacitor....

Ամբողջական նկարագրություն

Մատենագիտական մանրամասներ
Հիմնական հեղինակներ: Borer, K, Munday, D, Parker, M, Anghinolfi, F, Aspell, P, Campbell, M, Jarron, P, Heijne, E, Santiard, J, Verweij, H, Gossling, C, Reichold, A, Bonino, R, Clark, A, Kambara, H, et, A
Ձևաչափ: Journal article
Լեզու:English
Հրապարակվել է: 1994
Նկարագրություն
Ամփոփում:The 'APC3' is a charge sampling and storage chip designed for high speed readout of silicon detectors. It has 32 channels, each with pre-amplifier, integrator and storage capacitors. Current from a silicon detector connected to the input is integrated as a charge and stored on a capacitor. There are 128 capacitors per channel which are used sequentially to store the charge. The charge is held on the storage capacitor until it is either read out or discarded. Logic on the chip manages the storage and retrieval of samples. This logic uses a novel architecture based on a system of pointers and read-out addresses. This paper describes the operation of the chip and measurements of its performance.

Նմանատիպ նյութեր