Coupled aerothermal-mechanical analysis in single crystal double wall transpiration cooled gas turbine blades with a large film hole density

Coupled aerothermal-mechanical analysis in single crystal double wall transpiration cooled gas turbine blades with a large film hole density

The ambition for increasing gas turbine efficiency beyond current levels through the elevation of gas temperatures demands substantial progress in turbine blade cooling technology. Double wall transpiration cooling (DWTC) is an emerging technology which offers enhanced thermal protection at only mod...

Disgrifiad llawn

Manylion Llyfryddiaeth
Prif Awduron:	Courtis, M, Skamniotis, C, Cocks, A, Ireland, P
Fformat:	Journal article
Iaith:	English
Cyhoeddwyd:	Elsevier 2022

Eitemau Tebyg

Multiscale analysis of thermomechanical stresses in double wall transpiration cooling systems for gas turbine blades
gan: Skamniotis, C, et al.
Cyhoeddwyd: (2021)

Transpiration cooling for double-walled jet engine turbine blades
gan: Courtis, M
Cyhoeddwyd: (2023)

2D and 3D thermoelastic phenomena in double wall transpiration cooling systems for gas turbine blades and hypersonic flight
gan: Skamniotis, C, et al.
Cyhoeddwyd: (2021)

Designing against severe stresses at compound cooling holes of double wall transpiration cooled engine components
gan: Skamniotis, CG, et al.
Cyhoeddwyd: (2021)

Minimising stresses in double wall transpiration cooled components for high temperature applications
gan: Skamniotis, C, et al.
Cyhoeddwyd: (2020)

Creep-plasticity-fatigue calculations in the design of porous double layers for new transpiration cooling systems
gan: Skamniotis, CG, et al.
Cyhoeddwyd: (2021)

Ratchetting and creep failure in twin-wall turbine blades experiencing severe thermal and centrifugal loading
gan: Skamniotis, C, et al.
Cyhoeddwyd: (2022)

Impact of aerothermal modeling on the estimation of turbine blade life
gan: Collin, Jean E., 1978-
Cyhoeddwyd: (2006)

Influence of spanwise and streamwise film hole spacing on adiabatic film effectiveness for effusion-cooled gas turbine blades
gan: Courtis, M, et al.
Cyhoeddwyd: (2021)

Influence of Spanwise and Streamwise Film Hole Spacing on Adiabatic Film Effectiveness for Effusion-Cooled Gas Turbine Blades
gan: Matthew Courtis, et al.
Cyhoeddwyd: (2021-08-01)

Experiments of transpiration cooling inspired panel cooling on a turbine blade yielding film effectiveness levels over 95%
gan: Wambersie, A, et al.
Cyhoeddwyd: (2021)

Experiments of Transpiration Cooling Inspired Panel Cooling on a Turbine Blade Yielding Film Effectiveness Levels over 95%
gan: Augustin Wambersie, et al.
Cyhoeddwyd: (2021-06-01)

Aerothermal Analysis of a Turbine Casing Impingement Cooling System
gan: Riccardo Da Soghe, et al.
Cyhoeddwyd: (2012-01-01)

Advanced gas turbine cooling: double-wall turbine cooling technologies in turbine NGV/blade applications
gan: Murray, AV
Cyhoeddwyd: (2019)

A three-dimensional conjugate approach for analyzing a double-walled effusion-cooled turbine blade
gan: Ngetich, G, et al.
Cyhoeddwyd: (2018)

Analytical shakedown, ratchetting and creep solutions for idealized twin-wall blade components subjected to cyclic thermal and centrifugal loading
gan: Skamniotis, C, et al.
Cyhoeddwyd: (2022)

Experimental and numerical investigation of micro-scale effusion and transpiration air cooling on cascaded turbine blades
gan: Mingeon Kim, et al.
Cyhoeddwyd: (2022-04-01)

An experimentally validated low-order model of the thermal response of double-wall effusion cooling systems for high-pressure turbine blades
gan: Murray, AV, et al.
Cyhoeddwyd: (2021)

Study of double-wall effusion cooling scheme for gas turbine blade applications
gan: Ngetich, GC
Cyhoeddwyd: (2019)

Probabilistic aerothermal design of gas turbine combustors
gan: Bradshaw, Sean D. (Sean Darien), 1978-
Cyhoeddwyd: (2008)

Combustor and turbine aerothermal interactions in gas turbines with can combustors
gan: Aslanidou, I
Cyhoeddwyd: (2016)

Heat transfer enhancement within a turbine blade cooling passage using ribs and combinations of ribs with film cooling holes
gan: Shen, JR, et al.
Cyhoeddwyd: (1996)

Analysis of the Thermomechanical Stresses in Double-Wall Effusion Cooled Systems
gan: Elmukashfi, EMA, et al.
Cyhoeddwyd: (2020)

Transonic Turbine Blade Tip Aerothermal Performance With Different Tip Gaps-Part I: Tip Heat Transfer
gan: Zhang, Q, et al.
Cyhoeddwyd: (2011)

Casting of film-cooling holes for single-crystal blades
gan: Kai Miao, et al.
Cyhoeddwyd: (2023-11-01)

U-bend shaped turbine blade cooling passage optimization
gan: Namgoong, H, et al.
Cyhoeddwyd: (2008)

Aerothermal measurements and predictions of an intermediate turbine duct turning vane
gan: Johansson, M, et al.
Cyhoeddwyd: (2015)

Numerical study on the cooling characteristics of cat-ear-shaped film-cooling holes on turbine blades
gan: Lihao Zhang, et al.
Cyhoeddwyd: (2022-08-01)

Numerical modelling techniques for turbine blade internal cooling passages
gan: Dhopade, P, et al.
Cyhoeddwyd: (2015)

Film cooling effectiveness enhancement of rotating turbine blade using Shaped holes
gan: محسن قاضی, et al.
Cyhoeddwyd: (2017-12-01)

Impact of wall temperature on aerothermal characteristics of an array of surface microstructures
gan: Campanaro, D, et al.
Cyhoeddwyd: (2022)

Gas turbine blade cooling
gan: Milleville, Bertram John
Cyhoeddwyd: (2010)

Cooling of gas turbine blades /
gan: 173811 Mohamad Afifi Abdul Mukti

Effects of Crosswinds on the Aerothermal Behaviour of A Double-Skin Façade
gan: Ziari Saber, et al.
Cyhoeddwyd: (2024-12-01)

Dusting Hole Film Cooling Heat Transfer on a Transonic Turbine Blade Tip
gan: Ward Manneschmidt, et al.
Cyhoeddwyd: (2022-01-01)

MAXIMIZATION OF COOLING EFFECTIVENESS OF TURBINE BLADE SURFACES USING DIFFERENT ARRANGEMENT OF COOLING HOLES AND VARIOUS BLOWING RATIOS
gan: MADHURIMA DEY, et al.
Cyhoeddwyd: (2018-04-01)

Contributions to high technology readiness level experimental turbine aerothermal research and applications
gan: Michaud, M
Cyhoeddwyd: (2022)

Aerothermal effect of cavity welding beads on a transonic squealer tip
gan: Vieira, J, et al.
Cyhoeddwyd: (2021)

Aerothermal Performance of a Cooled Winglet at Engine Representative Mach and Reynolds Numbers
gan: O'Dowd, DO, et al.
Cyhoeddwyd: (2013)

Rotational effects on turbine blade cooling
gan: Barry, Pamela S. (Pamela Sue)
Cyhoeddwyd: (2005)