PLA/MMT and PLA/Halloysite Bio-Nanocomposite Films: mechanical, barrier, and transparency

PLA/MMT and PLA/Halloysite Bio-Nanocomposite Films: mechanical, barrier, and transparency

The usage of biopolymers in developing biodegradable food packaging films that are sustainable and safe towards environment has been restricted because of the poor mechanical and barrier properties of the biopolymers. This study aims to enhance the limited properties of biopolymers particularly poly...

Descripció completa

Dades bibliogràfiques
Autors principals:	Othman, Siti Hajar, Ling, Hee Nyia, A. Talib, Rosnita, Naim, Mohd Nazli, Risyon, Nazratul Putri, Md. Saifullah
Format:	Article
Idioma:	English
Publicat:	Scientific.Net 2019
Accés en línia:	http://psasir.upm.edu.my/id/eprint/81744/1/PLA_MMT%20and%20PLA.pdf

Ítems similars

Mechanical and thermal properties of PLA/halloysite bio-nanocomposite films: effect of halloysite nanoclay concentration and addition of glycerol
per: Othman, Siti Hajar, et al.
Publicat: (2017)

Effect of Reprocessing on the Viscosity and Mechanical Properties of PLA and PLA/MMT Nanocomposites
per: Zoubeida Taha Taha, et al.
Publicat: (2024-11-01)

Properties of polylactic aicd/polycaprolactone/montmorillonite (PLA/PCL/MMT) nanocomposites /
per: 512513 Reza Salehiyan, et al.
Publicat: (2010)

Effect of halloysite nanoclay concentration and addition of glycerol on mechanical properties of bionanocomposite films
per: Risyon, Nazratul Putri, et al.
Publicat: (2016)

Investigation on tensile properties of polylactide-nanoclay (PLA/ MMT) surface modification nanocomposites
per: Rajamanikam, Sharvien, et al.
Publicat: (2024)

Characterization of polylactic acid/halloysite nanotubes bionanocomposite films as food packaging films
per: Risyon, Nazratul Putri
Publicat: (2017)

Polylactic acid(pla)/acrylonitrile butadiene styrene(ABS) nanocomposites with hybrid graphene/ montmorillonite (MMT)
per: Mohd Bijarimi, Mat Piah, et al.
Publicat: (2018)

Green bio-based PLA with waste tyre and graphene nanocomposites
per: Vinoth, Francisco, et al.
Publicat: (2020)

A Study of Morphological and Thermal Properties of Polylactic Acid (PLA) Modified MMT (Ion Exchange Method) Nanocomposite
per: Wan Siti Noorhashimah, Wan Kamaruzaman
Publicat: (2013)

Fire retardancy behavior of PLA based nanocomposites
per: Herrero, Berta, et al.
Publicat: (2013)

Kenaf Nanofiber/Polylactic Asid (PLA) Nanocomposite.
per: Lasat, Agnes Surai, et al.
Publicat: (2011)

A process for producing polylactic acid(PLA)-cellulose nanocomposite.
per: Harun, Jalaludin, et al.
Publicat: (2010)

Mechanical properties of poly (lactic acid) (PLA)/clay nanocomposite
per: Mohd Shaifol, Hamid
Publicat: (2010)

CMOS PLA design
per: Dilparinder Singh
Publicat: (2009)

Composite films from kenaf derived cellulose (KDC) fibers and polylactic acid (PLA)
per: Abd Rahman, Siti Hajar, et al.
Publicat: (2010)

Characterization Copper (II) Chloride Modified Montmorillonite filled PLA Nanocomposites
per: Abu Hannifa, Abdullah, et al.
Publicat: (2014)

Modification of nanofiller to improve the final properties of polylactic acid(PLA)nanocomposites
per: Anthony, Latisha
Publicat: (2012)

Thermal behaviour of polylactic acid (PLA) nanocomposite based on modified nanoclay
per: Nur Madieha, Md Yusof
Publicat: (2012)

Effect of modified clay on the morphological and thermal properties of PLA/PBAT nanocomposites
per: Osman, Mohd Junaedy, et al.
Publicat: (2017)

Investigation on the flexural properties of nanofillers loading on the Jute/Carbon/PLA nanocomposites
per: Sairy, Nur Aqilah, et al.
Publicat: (2020)

Recycling Cork/PLA Bio-Composites Through Dissolution–Precipitation Method
per: Nuno Gama, et al.
Publicat: (2025-01-01)

The use of protector to stop transesterification in the synthesis of optimized tri-block coploymer (PCL-co-PLA)-b-PLA-b-(PCL-co-PLA)
per: Yik, Jia Jun.
Publicat: (2011)

Application of PLA/GO/ZnO and PLA/GO/Cu2O as sensor
per: Khaled S. Amin, et al.
Publicat: (2024-09-01)

Is Xi Jinpin reshaping the PLA?
per: Yoon, Sukjoon
Publicat: (2014)

Recent advancements in bio-based plasticizers for polylactic acid (PLA): A review
per: Shiyan Sun, et al.
Publicat: (2024-11-01)

Study on PLA/PA11 Bio-Based Toughening Melt-Blown Nonwovens
per: Zhu Feichao, et al.
Publicat: (2020-03-01)

PLA Degradation and PLA-Degrading Bacteria: A Mini-Review Journal: Key Engineering Materials
per: Joyce Cynthia, Jalani, et al.
Publicat: (2022)

Evaluation of Ibuprofen Prolonged Release of Biomedical PLA-PEG-PLA Hydrogel via Degradation Mechanism
per: Hien Thi-Thanh Nguyen, et al.
Publicat: (2023-01-01)

Mechanical and physical properties of kenaf-derived cellulose (KDC)-filled polylactic acid (PLA) composites
per: Mohamed Amin Tawakkal, Intan Syafinaz, et al.
Publicat: (2012)

Integrated PLA/LLDPE nanocomposites with compatibilizer and hydroxyapatite-zinc oxide: Mechanical, physical, thermal, and morphological properties
per: Ahmad Hafizullah Ritonga, et al.
Publicat: (2025-04-01)

Repeated mechanical recycling of biodegradable polymers: PLA exhibits less deterioration than PBAT/PLA blend
per: Naiara C. Farias, et al.
Publicat: (2024-01-01)

Permeability & characterization study of (polylactic acid) PLA-modified NA+ nanocomposites for packaging application
per: Siti Amirah, Nor Effendi
Publicat: (2013)

Effects of multi walled carbon nanotubes (MWCNTs) on the degradation behavior of plasticized PLA nanocomposites
per: Norazlina, H., et al.
Publicat: (2019)

Degradability studies of PLA nanocomposites under controlled water sorption and soil burial conditions
per: Norazlina, H., et al.
Publicat: (2018)

Effects of multi-walled carbon nanotubes (MWCNTs) on the degradation behavior of plasticized PLA nanocomposites
per: Norazlina, H., et al.
Publicat: (2019)

(Alumina and graphene)/ PLA nanocomposites manufactured by digital light processing 3D printer
per: Hossein Maleki, et al.
Publicat: (2024-09-01)

Development of continuous Kenaf/PLA composites
per: Tie, Seng Kah.
Publicat: (2012)

Entrevista a Joaquim Torres-Pla
per: Emili Boix-Fuster
Publicat: (2018-07-01)

A review on processing techniques of bast fibers nanocellulose and its polylactic acid (PLA) nanocomposites
per: Jawaid, Mohammad, et al.
Publicat: (2019)

Acrylonitrile butadiene styrene (ABS) / poly (lactic acid) (PLA) with graphene nanoplatelet (GNP) nanocomposites
per: Noor Shahadah, -, et al.
Publicat: (2018)