Characteristics of Hybrid Nanolubricants for MQL Cooling lubrication machining application

Characteristics of Hybrid Nanolubricants for MQL Cooling lubrication machining application

Efficient and effective lubricants have great application prospects in the manufacturing industries. Minimum quantity lubrication (MQL) machining with low flow rate of nanolubricants is investigated for cooling and lubrication during the process. This paper investigates the characterization of graph...

Full beskrivning

Bibliografiska uppgifter
Huvudupphovsmän:	Syh Kai, Lim, Wan Hamzah, Azmi, Ahmad Shahir, Jamaludin, Ahmad Razlan, Yusoff
Materialtyp:	Artikel
Språk:	English
Publicerad:	MDPI 2022
Ämnen:	TS Manufactures
Länkar:	http://umpir.ump.edu.my/id/eprint/36675/1/11%20Lim%20et%20al.%202022%20Lubricants.pdf

Liknande verk

Effects of Hybrid Nanocooling-Lubricants MQCL on Machining Temperature and Tool Wear Mechanisms under Turning Process of Titanium Alloy
av: Lim, Syh Kai, et al.
Publicerad: (2023)

Refining the composition of recycled spent lubricants mixed with alumina nanofluids for machining purpose
av: Lim, Syh Kai, et al.
Publicerad: (2020)

Study on the effectiveness of Extreme Cold Mist MQL system on turning process of stainless steel AISI 316
av: Ahmad Shahir, Jamaludin, et al.
Publicerad: (2018)

Experimental Investigation on Newtonian Behaviour and Viscosity of TiO2/PVE Nanolubricants for Application in Refrigeration System
av: Mohd Farid, Ismail, et al.
Publicerad: (2022)

Bold approach in finite element simulation on minimum quantity lubrication effect during machining
av: Ainur Munira, Rosli, et al.
Publicerad: (2019)

Investigations of nanocoolant based Al2O3 for improving cooling performance in hot press forming
av: Lim, Syh Kai
Publicerad: (2018)

Chatter detection on thin wall machining of alluminum alloy under MQL condition
av: Amirul Syafiq, Ibrahim
Publicerad: (2016)

Current and future challenges of hybrid electrochemical-mechanical machining process for micro- and nano-manufacturing
av: Ahmad Shahir, Jamaludin, et al.
Publicerad: (2024)

Effect of nozzle distance and cutting parameters on MQL machining of AISI 1045
av: Amiril Sahab, Abdul Sani, et al.
Publicerad: (2019)

Experimental Validation for Hot Stamping Process by Using Taguchi Method
av: Mohd Fawzi, Zamri, et al.
Publicerad: (2016)

Recent Study on Hard to Machine Material – Micromilling process
av: Ainur Munira, Rosli, et al.
Publicerad: (2021)

Tool Wear Observation During Unconventional Low Speed Machining Using Low Cost Micromilling
av: Ainur Munira, Rosli, et al.
Publicerad: (2021)

Surface texturing potential on carbide insert in reducing aluminium alloy adhesiveness during machining
av: Chia, Yun Qi, et al.
Publicerad: (2019)

Kurtosis quantification of different minimal quantity lubrication effects in machining cast iron with coated and uncoated tool
av: N., Jamil, et al.
Publicerad: (2018)

Mini review of carbon based additive in machining lubricant
av: K., Jun Li, et al.
Publicerad: (2020)

The stability of TiO2/POE nanolubricant for automotive air-conditioning system of hybrid electric vehicles
av: A. H, Hamisa, et al.
Publicerad: (2020)

Study of tool wear progression using nano-hybrid Cryogenic MQL in milling titanium alloy
av: Nurul Dayana, Mohd Noor, et al.
Publicerad: (2023)

The analysis of grid independence study in continuous disperse of MQL delivery system
av: Z., Zulkifli, et al.
Publicerad: (2023)

Rapid Direct Continuous Method for Hot Embossing of Glass Microlens Array Combined with CO2 Laser Irradiation and External Preheating/Cooling
av: Syarifah Nur Hasanah, Syed Kamarudin, et al.
Publicerad: (2021)

Machining with Minimum Quantity Lubrication and Nano-Fluid MQL: A Review
av: Syed Faizan Altaf, et al.
Publicerad: (2024-05-01)

Application of minimum quantity lubrication for various machining processes - A mini review
av: N. E. H., Zamiruddin, et al.
Publicerad: (2020)

Hybrid CNC–MXene nanolubricant for tribological application: Characterization, prediction, and optimization of thermophysical properties evaluation
av: Sakinah, Muhamad Hisham, et al.
Publicerad: (2024)

Experimental of Hot Machining for Stainless Steel 316L Cutting Process
av: Cholis, N., et al.
Publicerad: (2024)

Effects of grouser movement to sand-grouser interaction on unconsolidated soft sand incline using discrete element method (DEM) simulation
av: Siti Suhaila, Sabarudin, et al.
Publicerad: (2019)

A Review on Automotive Tires Significant Characteristic Identification for General Consumers
av: Ahmad Noor Syukri, Zainal Abidin, et al.
Publicerad: (2022)

A significant review on utilization of hybrid nanofluid in heat exchangers: Theoretical and experimental
av: Haziqatulhanis, Ibrahim, et al.
Publicerad: (2019)

Study on the effects of nozzle distance to surface roughness of workpiece under minimum quantity lubricant (MQL) milling process
av: Firdaus Shazriq, Mohd Fadzil, et al.
Publicerad: (2018)

Comparison on cooling efficiency of cooling pad materials for evaporative cooling system
av: Radhiyah, Abd Aziz, et al.
Publicerad: (2018)

The characteristics of hybrid Al2O3:SiO2 nanofluids in cooling plate of PEMFC
av: Muhammad Syafiq, Idris, et al.
Publicerad: (2021)

High precision estimation on physical behavior for cutting with various tool rake angle by finite element method
av: Ahmad Shahir, Jamaludin, et al.
Publicerad: (2018)

Study of an optimal surface property of carbide cutting tool by surface modification method
av: Razali, Mohd Nizar Mhd, et al.
Publicerad: (2019)

Physical properties of new formulation of hybrid nanofluid-based Minimum Quantity Lubrication (MQL) from modified jatropha oil as metalworking fluid
av: Ainaa Mardhiah, Sabri, et al.
Publicerad: (2023)

In-situ worn geometry effect over the surface roughness propagation during micro milling process
av: Nurul Farhana, Mohadzir, et al.
Publicerad: (2020)

Modelling of fuzzy inference system for micro milling - a preliminary study through FEM
av: Ainur Munira, Rosli, et al.
Publicerad: (2018)

Performance evaluation of different types of cutting fluid in the machining of aisi 01 hardened steel using pulsed jet minimal quantity lubrication system
av: Hamdan, A., et al.
Publicerad: (2011)

Effect of rake angle and feed rate on tool wear and surface topography for different chip size in machining carbon steels
av: Mohd Fawzi, Zamri, et al.
Publicerad: (2022)

Taguchi method approach on effect of lubrication condition on surface roughness in milling operation
av: Mohamad Syahmi, Shahrom
Publicerad: (2012)

Design of spline surface vacuum gripper for pick and place robotic arms
av: Nursyiqah, Jasman, et al.
Publicerad: (2020)

Effect of mig and tig welding on hybrid structure using modal analysis
av: Ilmanfaiq, Hamzah
Publicerad: (2013)

Heuristic design of U-shaped die cooling channel for producing ultra-high strength steel using hot press forming
av: Mohd Fawzi, Zamri, et al.
Publicerad: (2018)